The role of polyol reaction catalysts in the cure kinetics and mechanical behavior of polyurethane adhesives
- 29 January 2018
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 94 (11) , 880-892
Abstract
Polyurethane is one of the most versatile and commonly applied polymers in the world. Its properties are strongly dependent on the polyol/isocyanate structures and NCO:OH ratio, among other parameters. Additionally, the polyol structure is affected by the catalyst used for the reaction and production. The catalyst may indirectly affect the curing kinetics and mechanical strength of the PU, due to changes of polyol properties. This work evaluates the effects of two catalysts on the polyol structure and thus the effect of these polyol changes on the curing kinetics and mechanical strength of a PU adhesive. Two polyols were synthetized using the same hydroxyl-containing molecules derived from renewable natural sources, but with different types of catalysts (based on Sn or Li/Ti). The synthesized polyols were separately mixed with diphenylmethane diisocyanate in a 1.1:1 ratio of NCO to OH to form two bio-based PUs. The polyols were investigated by Fourier transform infrared (FTIR) spectroscopy, which showed the occurrence of some changes in the chemical groups of the polyol structure for both catalysts, as well as an influence on the curing kinetics. The mechanical behavior of the PU adhesives was characterized by dynamic mechanical analysis (DMA) and peeling tests. The results show a higher curing rate and higher peeling strength for the PU adhesives obtained using the Sn-based catalyst; both adhesives showed cohesive failure.Keywords
Funding Information
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (163369/2015-1)
This publication has 31 references indexed in Scilit:
- Synthesis of bio-additives: transesterification of ethyl acetate with glycerol using homogeneous or heterogeneous acid catalystsJournal of the Brazilian Chemical Society, 2013
- A novel direct synthesis of polyol from soybean oilChinese Chemical Letters, 2012
- Shape memory polyurethane foamsExpress Polymer Letters, 2012
- The Role of Hard Segment Content on the Molecular Dynamics of Poly(tetramethylene oxide)-Based Polyurethane CopolymersMacromolecules, 2011
- Influence of cross-link density on the properties of ROMP thermosetsPolymer, 2009
- Stour and Blyth as English river-namesEnglish Language and Linguistics, 2006
- Diesel-like fuel obtained by pyrolysis of vegetable oilsJournal of Analytical and Applied Pyrolysis, 2004
- SYNTHESIS OF BRANCHED POLYMERS: AN INTRODUCTION*Journal of Macromolecular Science, Part C: Polymer Reviews, 2001
- Properties of Polyurethane Elastomers with Different Hard/Soft Segment RatioThe Journal of Adhesion, 1998
- Step-growth polymerizationJournal of Chemical Education, 1981