Decreasing ply thickness of CFRP laminates leads to higher matrix damage resistance and greater design freedom. The authors recently developed CFRP laminates with only one row of fibers per ply (unit-thin-ply) and ply thickness below 8 μm. But extremely low ply thickness also reduces the fiber content and in-plane fracture toughness of the laminate. To address these shortcomings, bio-inspired helicoidal layup structure was implemented. Owing to the unique microstructure of helicoidal layups, the fiber weight content of the unit-thin-ply helicoidal laminate can reach 77.6%, whilst the fiber weight content of the unit-thin-ply laminates with the conventional QI layup is 65.1%. The in-plane modulus and strength of unit-thin-ply helicoidal laminates thus increase by up to 20% and 23.5%, respectively. New damage patterns were also observed in the unit-thin-ply laminates subjected to out-of-plane loading: Fiber fracture developed before large delamination in the unit-thin-ply QI laminate; Matrix cracks were formed first in unit-thin-ply helicoidal laminates, followed by fiber fracture upon load drop, which significantly improved their specific peak load by up to 137.1%. In the compact tension test, directional biased unit-thin-ply helicoidal laminate can divert the crack front and formed a unique dune-like fractured plane, whereas Quad counterpart exhibits short fiber pull-out. As a result, unit-thin-ply helicoidal laminate exhibits a 382.5% increase of in-plane fracture toughness, and can also prevent catastrophic fiber fracture observed in the Quad counterpart. The damage patterns of unit-thin-ply laminates and laminates with conventional ply thickness was also compared, and unit-thin-ply laminates showed outstanding delamination resistance.