Design of a Piezoelectric-Actuated Microgripper With a Three-Stage Flexure-Based Amplification
Authors:
- 2 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 20 (5) , 2205-2213
Abstract
This paper presents a novel microgripper mechanism for micromanipulation and assembly. The microgripper is driven by a piezoelectric actuator, and a three-stage flexure-based amplification has been designed to achieve large jaw displacements. The kinematic, static and dynamic models of the microgripper have been established and optimized considering the crucial parameters that determine the characteristics of the microgripper. Finite element analysis was conducted to evaluate the characteristics of the microgripper, and wire electro discharge machining technique was utilized to fabricate the monolithic structure of the microgripper mechanism. Experimental tests were carried out to investigate the performance of the microgripper and the results show that the microgripper can grasp microobjects with the maximum jaw motion stroke of 190 μm corresponding to the 100-V applied voltage. It has an amplification ratio of 22.8 and working mode frequency of 953 Hz.Keywords
Funding Information
- National Natural Science Foundation of China (51205279, 51275337, 51175372)
- Science and Technology Commission of Tianjin Municipality (13JCQNJC04100)
- Tianjin University for Peiyang Elite Scholar (60301014)
This publication has 24 references indexed in Scilit:
- A new design of piezoelectric driven compliant-based microgripper for micromanipulationMechanism and Machine Theory, 2009
- Mechanical and Control-Oriented Design of a Monolithic Piezoelectric Microgripper Using a New Topological Optimization MethodIEEE/ASME Transactions on Mechatronics, 2009
- Design and Fabrication of a Four-Arm-Structure MEMS GripperIEEE Transactions on Industrial Electronics, 2008
- Nanonewton force-controlled manipulation of biological cells using a monolithic MEMS microgripper with two-axis force feedbackJournal of Micromechanics and Microengineering, 2008
- Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic FieldJournal of Microelectromechanical Systems, 2007
- A microgripper using piezoelectric actuation for micro-object manipulationSensors and Actuators A: Physical, 2007
- Electrothermally activated SU-8 microgripper for single cell manipulation in solutionJournal of Microelectromechanical Systems, 2005
- Fabrication and characterization of an SU-8 gripper actuated by a shape memory alloy thin filmJournal of Micromechanics and Microengineering, 2003
- A microgripper using smart piezoelectric actuators2002
- SMA microgripper with integrated antagonismSensors and Actuators A: Physical, 2000