Abstract
In this study, the objective was to conduct a laboratory investigation of rheological properties of non-foaming WMA additives at a mid-temperature. The conventional testing procedures such as viscosity, performance grade, creep and creep recovery, and frequency sweep were performed to determine the influences of non-foaming additives on asphalt binders. The experimental design included four binders and four non-foaming WMA additives. The test results indicated that, as expected, the non-foaming WMA additive can reduce the viscosity value of asphalt binder and thus decrease the mixing and compaction temperatures of mixture. The failure temperature of binders containing non-foam additive has a slight increase compared to the virgin binder and thus, improve the rut resistance of the mixtures. In addition, creep recovery and frequency sweep tests show that the binder with Sasobit has a slightly higher complex modulus but exhibits lower creep compliance and phase angle than the binder containing other WMA additives.

This publication has 1 reference indexed in Scilit: