Microstructure Properties of Rapidly Solidified Al-Zn-Mg-Cu Alloys
Author:
Open Access
- 2 March 2014
- journal article
- research article
- Published by Wiley in Indian Journal of Materials Science
- Vol. 2014, 1-6
Abstract
The Rietveld X-ray diffraction analysis was applied to analyze the weight fraction of precipitation phases and microstructure characterizations of rapidly solidified Al-8Zn-4Mg-Cu, = 1, 4, 8, and 10 alloys (in wt.%), prepared by melt spun technique. A good agreement between observed and calculated diffraction pattern was obtained and the conventional Rietveld factors (, , and GOF) converged to satisfactory values. Solid solubilities of Zn, Mg, and Cu in α-Al were extended to high values. Besides, metastable Al0.71Zn0.29, intermetallic Al2CuMg, Al2Cu, and CuMgZn phases have been observed for = 4, 8, and 10 Cu alloys. The crystal structure and microstructure characterizations exhibit strong Cu content dependence.
Keywords
Funding Information
- National Research Center of Egypt
This publication has 18 references indexed in Scilit:
- Effects of Zr addition on the liquid phase separation and the microstructures of Cu–Cr ribbons with 18–22at.% CrJournal of Alloys and Compounds, 2008
- Nanocrystallization and hydriding properties of amorphous melt-spun Mg65Cu25Nd10 alloyJournal of Alloys and Compounds, 2007
- Precipitation hardening in Al–Cu–Mg alloys revisitedScripta Materialia, 2006
- Investigation of phase equilibria in alloys of the Al–Zn–Mg–Cu–Zr–Sc systemJournal of Alloys and Compounds, 2004
- A study of microstructure and microsegregation of aluminum 7050 alloyMaterials Science and Engineering: A, 2003
- Magnetic properties enhancement of Nd2Fe14B/α–Fe nanocomposites with a combined addition of Cu and TiJournal of Applied Physics, 2003
- The effect of homogenization treatment on the hot workability between the surface and the center of AA 2014 ingotsMaterials Characterization, 2002
- Effect of compositional variations on characteristics of coarse intermetallic particles in overaged 7000 aluminium alloysMaterials Science and Technology, 2001
- Influence of copper addition on precipitation kinetics and hardening in Al–Zn–Mg alloyMaterials Science and Technology, 1999
- The effect of copper content and heat treatment on the stress corrosion characteristics of Ai-6Zn-2Mg-X Cu alloysMetallurgical Transactions A, 1981