Molybdenum Microheaters for MEMS-Based Gas Sensor Applications: Fabrication, Electro-Thermo-Mechanical and Response Characterization
- 25 October 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 17 (1) , 22-29
Abstract
In this paper, we present the fabrication and characterization of molybdenum microheaters for high-temperature gas sensing applications. The surface morphology of dc magnetron sputtered molybdenum thin films was characterized by scanning electron microscopy and atomic force microscopy. The suspended membrane microheater consumed 104 mW to reach a maximum temperature of 800°C and showed an absolute thermal resistance of 7.2°C/mW. Thermal distribution patterns over the active heating area were recorded using FLIR camera. It showed a temperature gradient of 1.18 % from the center of the microheater to its periphery. The thermal and mechanical stabilities of the microheater were analyzed, and its membrane failure at higher operating temperatures was prevented. The microheater membrane deformation at different temperatures was characterized using optical profilometer, and its maximum value was found to be $16.25~\mu \text{m}$ at 800 °C. The microheater response to a pulse, continuous pulse train, and constant dc voltages was characterized. Its response and recovery times are in the order of 19 and 34 ms, respectively. It showed a stable temperature with a negligible resistance drift (0.96%) over a period of 600 h. The TiO2 thin film integrated molybdenum microhotplate-based MEMS gas sensor response for CO (5000 ppb) was measured at different operating temperatures (300 °C-700 °C).
Keywords
Funding Information
- GITAM University
- Department of Education, Ministry of Human Resource Development, Government of India
- QIP Sponsorship of All India Council for Technical Education, New Delhi
This publication has 19 references indexed in Scilit:
- Design and electro-thermo-mechanical analysis of high temperature molybdenum microheaters for exhaust gas sensing applications2015
- A molybdenum MEMS microhotplate for high-temperature operationSensors and Actuators A: Physical, 2012
- Thermo-mechanical characterization of surface-micromachined microheaters using in-line digital holographyMeasurement Science and Technology, 2009
- A new MEMS‐based system for ultra‐high‐resolution imaging at elevated temperaturesMicroscopy Research and Technique, 2009
- Microhotplates with TiN heatersSensors and Actuators A: Physical, 2008
- Tungsten-Based SOI Microhotplates for Smart Gas SensorsJournal of Microelectromechanical Systems, 2008
- On-chip deposition of carbon nanotubes using CMOS microhotplatesNanotechnology, 2007
- SnO2:Sb – A new material for high-temperature MEMS heater applications: Performance and limitationsSensors and Actuators B: Chemical, 2007
- Design and fabrication of high-temperature micro-hotplates for drop-coated gas sensorsSensors and Actuators B: Chemical, 2000
- Silicon hotplates for metal oxide gas sensor elementsMicrosystem Technologies, 1997