Optimising fused filament fabrication surface roughness for a dental implant
- 10 February 2023
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (8) , 954-959
Abstract
Medical applications of 3D Printing (3DP) have been investigated with dental implants and prosthetics since 2000. However, the use of 3DP in dental implants has been growing due to their ability to print scaffolds with functional characteristics. The present work optimizes a medical-dental implant 3D printed by the fused filament fabrication (FFF) technology in terms of three 3DPprocessing parameters, i.e. the infill rate (InfR), platform temperature (PlaT) and printing temperature (PriT). Furthermore, surface roughness is outlined in each case, and the parameter effects are explained while the printing time, shape quality and surface hardness are reported for the optimized implant. Additionally, a 3D printed dental implant with 0.16 mm Layer Thickness (LT) is utilized to show the pros and cons of the FFF technology versus the Poly Jet photopolymerization with 16 μm LT. Lastly, current challenges and future directions in FFF 3DP optimization issues of dental implants are also briefly outlined.Keywords
This publication has 20 references indexed in Scilit:
- On improving the surface finish of 3D printing polylactic acid parts by corundum blastingRapid Prototyping Journal, 2021
- An investigation of PLA/W parts quality fabricated by FFFMaterials and Manufacturing Processes, 2021
- Surface Roughness Investigation of Poly-Jet 3D PrintingMathematics, 2020
- Quality Performance Evaluation of Thin Walled PLA 3D Printed Parts Using the Taguchi Method and Grey Relational AnalysisJournal of Manufacturing and Materials Processing, 2020
- On the application of grey Taguchi method for benchmarking the dimensional accuracy of the PLA fused filament fabrication processSN Applied Sciences, 2020
- Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed ScaffoldsAdvanced Functional Materials, 2019
- The Role of 3D Printing in Medical Applications: A State of the ArtJournal of Healthcare Engineering, 2019
- A review on quality control in additive manufacturingRapid Prototyping Journal, 2018
- From 3D models to 3D prints: an overview of the processing pipelineComputer Graphics Forum, 2017
- A Study of the dimensional accuracy obtained by low cost 3D printing for possible application in medicineIOP Conference Series: Materials Science and Engineering, 2016