Failure Mechanisms of EB-PVD Thermal Barrier Coating in Simulated Aero-Engine Erosion Environment
Open Access
Abstract
To simulate the erosion damage behavior of thermal barrier coatings (TBCs) under actual service conditions in an aircraft engine environment, this study developed a multi-factor coupled test setup capable of simulating combined loading under high-temperature (1150 °C), high-speed (0.4 Mach), and solid-particle erosion conditions. Yttria-stabilized zirconia (YSZ) TBCs were prepared using electron beam physical vapor deposition (EB-PVD). For different erosion durations (2 h, 5 h, 8 h, 12 h), the evolution of macroscopic and microscopic morphologies as well as the development of residual stresses in the thermally grown oxide (TGO) layer were systematically investigated. The results indicate that the erosion process of the YSZ coating can be divided into three stages. During the initial high-erosion-rate stage (8.17 g/kg), erosion damage was confined to the grain tips of the columnar crystals, primarily caused by brittle fracture at the grain tips, and the TGO stress was relatively low (−0.6 GPa). During the intermediate stage, the erosion rate was lower (2.74 g/kg). Impact stresses induced microcracks within the columnar grains, which gradually connected to form intergranular fractures. This led to the expansion of localized spalling pits. The interface began to wrinkle, and the stress rose to −2.2 GPa. In the final accelerated failure stage (5.88 g/kg), horizontal cracks fully propagated, leading to large-scale peeling of the coating. The stress was released to −0.9 GPa. The coating failure mechanism evolves from surface damage to interfacial peeling, which is closely related to the coating structure, stress evolution, and interfacial state.Keywords
Funding Information
- Beijing Institute of Aeronautical Materials (KJSJ220543)
This publication has 46 references indexed in Scilit:
- Progress and strategies in advanced aerospace materials for extreme environments: A reviewActa Astronautica, 2025
- Simulation of foreign particle erosion-induced failure in thermal barrier coatings: A novel coupling plastic damage model of dual-horizon peridynamics and FEMInternational Journal of Impact Engineering, 2025
- Effect of bond coating surface roughness on high-temperature performance of EB-PVD thermal barrier coatingsCeramics International, 2025
- Long lifespan thermal barrier coatings overview: Materials, manufacturing, failure mechanisms, and multiscale structural designCeramics International, 2022
- Al-modification for PS-PVD 7YSZ TBCs to improve particle erosion and thermal cycle performancesJournal of Advanced Ceramics, 2022
- Microstructural Characterization and Room-Temperature Erosion Behavior of As-Deposited SPS, EB-PVD and APS YSZ-Based TBCsJournal of Thermal Spray Technology, 2018
- Development and Optimization of Tailored Composite TBC Design Architectures for Improved Erosion DurabilityJournal of Thermal Spray Technology, 2017
- Stress Analysis and Failure Mechanisms of Plasma-Sprayed Thermal Barrier CoatingsJournal of Thermal Spray Technology, 2017
- Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testingInternational Journal of Fatigue, 2008
- Advanced thermal gradient mechanical fatigue testing of CMSX-4 with an oxidation protection coatingInternational Journal of Fatigue, 2008