Optimizing Bendable “ARC” Optical Fibers for Comparable Performance to Rod-Type Fibers in Ultra-High-Power Lasers
- 28 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (20) , 7342-7349
Abstract
We explored bend-compensated, parabolic-core, low-index contrast optical fiber with tilted cladding for applications in high-power lasers. First, we understood the impact of different parameters such as the alpha parameter of parabolic core, core diameter, tilted cladding diameter, and outer cladding diameter on the discriminative loss and power delocalization between the fundamental mode (FM) and higher order modes (HOMs) at different bend diameters around 1 μm wavelength. Later, we managed to find different sets of fiber design parameters so that: (a) an effective area of the FM between 900 to 1200 μm 2 , while ensuring a loss lower than 0.01 dB/m and a loss higher than 100 dB/m for bend diameter in the range of 27 to 35 cm, (b) an effective area of the FM around 2500 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 20 dB/m for bend diameter less than 50 cm, and (c) an effective area of the FM around 5000 μm 2 , while ensuring a loss lower than 0.1 dB/m and a loss higher than 10 dB/m for bend diameter 100 cm can be achieved. We have pushed the boundaries of coiled large mode area fiber performance by demonstrating record effective area and suppressed HOMs, approaching the capabilities of the current state-of-the-art rod-type fibers.Keywords
This publication has 23 references indexed in Scilit:
- Novel Dopant Tailored Fibers Using Vapor Phase Chelate Delivery TechniquePhysica Status Solidi (a), 2021
- Transverse mode instabilityAdvances in Optics and Photonics, 2020
- High-power fibre lasersNature Photonics, 2013
- Design of Asymmetric Large-mode Area Optical Fiber With Low-bending LossJournal of Lightwave Technology, 2012
- Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisationLight: Science & Applications, 2012
- Solid-Core Photonic Bandgap Fibers for High-Power Fiber LasersIEEE Journal of Selected Topics in Quantum Electronics, 2009
- Design of large-mode-area amplifier fibers resistant to bend-induced distortionJournal of the Optical Society of America B, 2007
- Nonlinear Fiber Optics2007
- Influence of curvature on the losses of doubly clad fibersApplied Optics, 1982
- Change of the refractive index in an optical fiber due to external forcesApplied Optics, 1978