Improvement in Device Performance of Vertical Thin-Film Transistors Using Atomic Layer Deposited IGZO Channel and Polyimide Spacer

Authors:

Abstract
Technical strategies for improving the device characteristics of the In-Ga-Zn-O (IGZO) vertical channel thin-film transistors (VTFTs) were presented and investigated. The vertical sidewall was constructed by dry-etch process and subsequently covered with IGZO, Al 2 O 3 , and AZO as active, gate insulator, and gate electrode layers by means of conformal atomic-layer-deposition. An abrupt profile and flat back-channel were achieved by employing the spin-coated polyimide (PI) spacer. The Off-current was additionally alleviated simply by cutting the area of an active layer. The fabricated IGZO VTFT using PI spacer with an “active-cut” structure exhibited an On/off ratio of 10 3 , a linear mobility of 7.1 cm 2 /Vs, and a subthreshold swing of 1.2 V/decade.
Funding Information
  • Korea Evaluation Institute of Industrial Technology through the Korean Government (10079974)
  • Kyung Hee University through the Samsung Electronics Research and Development Program entitled Flexible Flash Memory Device Technologies for Next-Generation Consumer Electronics

This publication has 9 references indexed in Scilit: