Determination of the PIC700 Ceramic’s Complex Piezo-Dielectric and Elastic Matrices from Manageable Aspect Ratio Resonators
Open Access
Abstract
Achieving good piezoelectric properties, such as the widely reported d33 charge coefficient, is a good starting point in establishing the potential applicability of piezoceramics. However, piezoceramics are only completely characterized by consistent piezoelectric-elastic-dielectric material coefficient matrices in complex form, i.e., including all losses. These matrices, which define the various alternative forms of the constitutive equations of piezoelectricity, are required for reliable virtual prototyping in the design of new devices. To meet this need, ten precise and accurate piezoelectric dielectric and elastic coefficients of the material, including all losses, must be determined for each alternative. Due to the difficulties arising from the coupling of modes when using the resonance method, this complete set of parameters is scarcely reported. Bi0.5Na0.5TiO3-based solid solutions are already commercially available in Europe and Japan. Here, we report a case study of the determination of these sets of material coefficients (diα, giα, eiα and hiα; sE,Dαβ and cE,Dαβ; εTik and εSik; and βTik and βSik), including all losses, of the commercial PIC700 eco-piezoceramic. Plate, disk, and cylinder ceramic resonators of a manageable aspect ratio were used to obtain all the material coefficients. The validation procedure of the matrices is also given by FEA modeling of the considered resonators.Keywords
Funding Information
- Ministerio de Ciencia e Innovación. Gobierno de España (MAT2017-86168-R)
This publication has 23 references indexed in Scilit:
- Full Set of Material Properties of Lead-Free PIC 700 for Transducer DesignersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2020
- Revisiting the Characterization of the Losses in Piezoelectric Materials from Impedance Spectroscopy at ResonanceMaterials, 2016
- Transferring lead-free piezoelectric ceramics into applicationJournal of the European Ceramic Society, 2015
- Comparison of Methods for the Measurement of Piezoelectric CoefficientsIEEE Transactions on Instrumentation and Measurement, 2013
- Shear resonance mode decoupling to determine the characteristic matrix of piezoceramics for 3-D modelingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2011
- Key issues in the characterization of porous PZT based ceramics with morphotropic phase boundary compositionJournal of Electroceramics, 2007
- Iterative Method in the Characterization of Piezoceramics of Industrial InterestAdvances in Science and Technology, 2006
- Method for Obtaining the Full Set of Linear Electric, Mechanical, and Electromechanical Coefficients and All Related Losses of a Piezoelectric CeramicJournal of the American Ceramic Society, 2004
- Publication and Proposed Revision of ANSI/IEEE Standard 176-1987 "ANSI/IEEE Standard on Piezoelectricity"IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1996
- Representation of Dielectric, Elastic, and Piezoelectric Losses by Complex CoefficientsIEEE Transactions on Sonics and Ultrasonics, 1967