Off-axis pivot mounting for aberration-corrected concave gratings at normal incidence
Author:
- 1 March 2000
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 39 (7) , 1084-1093
Abstract
The off-axis pivot-point mounting for toroidal uniform line-space (TULS) gratings and spherical varied line-space (SVLS) is presented: One scans the spectrum by rotating the grating about the pivot point. The best choice for the location of the point is discussed: For a monochromator the location is chosen such that the grating is moved approximately along the bisector of the subtended angle; for a spectrometer, it is chosen such that the grating is moved approximately along the direction of the incident ray. Minimizing the spectral defocusing caused by the rotation of the grating determines the optimum length of the pivot arm. The pivot points for TULS and SVLS gratings are found to be located on opposite sides with respect to the normal to the grating. In a comparison of the optical performance, the spectral focusing is similar, but the spatial aberrations can be fewer for a SVLS grating.Keywords
This publication has 7 references indexed in Scilit:
- Design of a high-resolution extreme-ultraviolet imaging spectrometer with aberration-corrected concave gratingsApplied Optics, 1998
- Optical performances of the Ultraviolet Coronagraph Spectrometer of the Solar Heliospheric ObservatoryApplied Optics, 1997
- The Ultraviolet Coronagraph Spectrometer for the solar and heliospheric observatorySolar Physics, 1995
- Toroidal grating obtained on an elastic substrateApplied Optics, 1981
- Mechanically ruled aberration-corrected concave gratingsApplied Optics, 1980
- Theory of the Concave Grating I*†Journal of the Optical Society of America, 1959
- The Torus GratingJournal of the Optical Society of America, 1950