Hierarchical optimization of current‐limiting devices with discrete parameters in multi‐terminal DC power grids
Open Access
- 22 November 2022
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 17 (1) , 219-229
Abstract
Optimizing current‐limiting devices (CLDs) in multi‐terminal DC grids is essential to limit the fault current while reducing the cost of devices. However, current studies mainly focus on optimizing CLDs based on continuous parameters in simple DC grids, which cannot meet the optimal efficiency demand of CLDs in complex multi‐terminal DC grids and results in each CLD needing to be customized separately, increasing the production cost of devices. Therefore, to improve the optimal efficiency under complex multi‐terminal DC grids, the principle of fault area division based on the coupled degree of converter and DC grid and the corresponding hierarchical optimal implementation schemes of CLDs are proposed first. Then, the effects of CLD parameters on the fault current are analysed, and their sensitive ranges of current‐limiting are revealed. In combination with the error range of inductance, the principle of discrete parameter design of current‐limiting inductance parameters is put forward. Next, the discrete parameters of CLDs are optimized by an intelligence algorithm. Finally, the hierarchical optimal method of CLDs based on discrete parameters is validated on a six‐terminal DC grid in PSCAD/EMTDC. The proposed method can satisfy the demand of current‐limiting, which is more in line with the standardization requirements in practice.Keywords
Funding Information
- National Natural Science Foundation of China (52077037)
This publication has 8 references indexed in Scilit:
- Research on Coordination and Optimal Configuration of Current Limiting Devices in HVDC GridsIEEE Access, 2019
- Coordination of MMCs With Hybrid DC Circuit Breakers for HVDC Grid ProtectionIEEE Transactions on Power Delivery, 2018
- A Fast DC Fault Detection Method Using DC Reactor Voltages in HVdc GridsIEEE Transactions on Power Delivery, 2018
- A Modified Bridge Switch-Type Flux-Coupling Nonsuperconducting Fault Current Limiter for Suppression of Fault TransientsIEEE Transactions on Power Delivery, 2018
- Comparative Study of 1-MW PM and HTS Synchronous Generators for Marine Current TurbineIEEE Transactions on Applied Superconductivity, 2018
- A Pole-to-Pole Short-Circuit Fault Current Calculation Method for DC GridsIEEE Transactions on Power Systems, 2017
- Fault Detection and Interruption in an Earthed HVDC Grid Using ROCOV and Hybrid DC BreakersIEEE Transactions on Power Delivery, 2014
- Optimization of limiting reactors design for DC fault protection of multi-terminal HVDC networks2014