JMJun Mei

Jun Mei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jun Mei has a total of 56 co-authors. Here are the top co-authors by number of shared publications:

  • Weiye Diao

    School of Electrical Engineering, Southeast University, Nanjing, China

    4 shared publications
  • Guanghua Wang

    School of Electrical Engineering, Southeast University, Nanjing, China

    3 shared publications
  • Guangyao Fan

    School of Electrical Engineering, Southeast University, Nanjing, China

    3 shared publications
  • Pengfei Zhu

    School of Electrical Engineering, Southeast University, Nanjing, China

    3 shared publications
  • Bingbing Wang

    School of Electrical Engineering, Southeast University, Nanjing 210096, China Jiangsu Key Laboratory of Smart Grid Technology and Equipment, Southeast University, Nanjing 210096, China

    2 shared publications
  • Can Huang

    School of Electrical Engineering, Southeast University, Nanjing 210096, China

    2 shared publications

Latest Publications

  • Open Access

    Real-Time Transient Voltage and Frequency Sensing Strategy for Resilience Enhancement of PV-Storage Systems in Weak Grids

    by Yu Ji, Zixuan Liu, Xin Gu, Chenze Huo, Zihan Zhang, Song Tang, Jun Mei, Can Huang

    Photovoltaic (PV)-storage systems operating in weak grids are affected by high grid impedance, transient voltage disturbances, and measurement noise, which can degrade frequency regulation, increase converter current stress, and impose high-frequency current fluctuations on the battery. To address these issues, this paper proposes a multi-timescale transient-state sensing and signal-processing framework for grid-forming PV-hybrid storage systems. The proposed framework combines three coordinated functions. First, a frequency-domain HESS power-decoupling mechanism separates high-frequency transient power components and assigns them to the supercapacitor, while the battery mainly handles low-frequency energy variations. Second, a voltage-deviation-driven adaptive virtual inductance is introduced to increase the equivalent output impedance during voltage-sag events and reduce transient inrush current. Third, a noise-resilient frequency sensing strategy based on a filtered frequency derivative and a dead-band for false-trigger suppression is developed to reduce noise-induced false triggering in adaptive inertia and damping control. Comparative simulations indicate that under the tested weak-grid conditions, the proposed method reduces the transient inrush-current peak by 53.2%, decreases the maximum dynamic frequency deviation by approximately 75%, and improves the active-power regulation speed by more than 50%. These results indicate that the proposed sensing-oriented framework can improve transient response while reducing converter and battery current stress in PV-storage systems connected to high-impedance grids.


  • Open Access

    Exponential Synergistic Adaptive Control for PV–Storage Grid-Forming Inverters to Eliminate Overdamped Hysteresis in Weak Grids

    by Yu Ji, Zixuan Liu, Xin Gu, Chenze Huo, Zihan Zhang, Song Tang, Jun Mei, Can Huang

    Traditional virtual synchronous generator (VSG) control in photovoltaic–storage systems struggles with severe dynamic deterioration under high-impedance weak grid conditions. Through small-signal modeling, this paper analytically reveals that increased grid inductance forces the system’s dominant poles to migrate significantly toward the real axis, inducing a critical “overdamped hysteresis” that degrades transient tracking speed and oscillation attenuation. To break these physical constraints, an improved exponential synergistic adaptive control strategy is proposed. By establishing a synergistic optimization mechanism between the virtual inertia and damping coefficients via a square-root coupled exponential function, the proposed method achieves precise multi-parameter coordination. During the initial phase of disturbances, it triggers an explosive parameter surge to provide “stiff” transient support, strictly limiting frequency deviations and the rate of change of frequency (RoCoF). During the recovery phase, it drives a precipitous parameter decay to actively neutralize the overdamped coupling effect, forcibly pulling the migrated poles back to the ideal underdamped region. Rigorous switching-model simulations demonstrate that, compared to conventional fixed-parameter and power function-based adaptive methods, the proposed synergistic strategy significantly improves transient performance. Quantitatively, during load steps, it restricts the frequency nadir to 49.85 Hz (compared to 49.73 Hz for fixed parameters). During extreme grid stiffness transitions (SCR drops), it completely eliminates active power tracking hysteresis by reducing the settling time to just 0.26 s and aggressively clamps AC overcurrent peaks from 38 A down to 31 A. Supported by coordinated PV–storage energy management, the proposed method offers a highly robust grid-forming framework for renewable-dominated weak power grids. Supported by coordinated PV–storage energy management, the proposed method offers a highly robust grid-forming framework for renewable-dominated weak power grids.


  • Dynamic Mode Decomposition Based Reduced-Order Temperature Field Prediction Method for IGBT Module

    by Jiahao Geng, Fujin Deng, Kai Hou, Qiang Yu, Yaqian Zhang, Yeyuan Xie, Jun Mei, Guangtai Zhang

    Detailed temperature field distribution of high-power insulated gate bipolar transistor (IGBT) modules is essential information for reliability analysis and thermal design of power electronic systems. This article proposes a dynamic mode decomposition (DMD) based reduced-order temperature field prediction method for IGBT module. The IGBT temperature field (ITF) snapshot data obtained from finite element method simulation are decomposed to obtain the dynamic modes. And then, the dominant modes among dynamic modes are chosen to establish a reduced-order model, which can quickly predict the ITF. The proposed DMD based RTFP method only requires a small number of sample snapshots to capture the dynamic modes of ITF and selects a small number of dominant modes to predict the ITF, and accordingly it improves the computational efficiency and reduces the disk space occupation. In addition, it does not require complex mathematical models and can obtain detailed ITF distribution. Finally, the accuracy of the proposed method is verified by simulation and experiment.


  • Transient Angle Suppression and Voltage Support Control for VSG Based on Virtual Circuit Elements

    by Weiye Diao, Jun Mei, Linyuan Wang, Guanghua Wang

    Insufficient reactive voltage support and power angle divergence are critical issues threatening the stable operation of virtual synchronous generators (VSG) under faults. However, existing research lacks comprehensive transient control methods considering both voltage and transient angle stability and fails to explore transient enhancement strategies after fault current limiting. In this paper, a fault circuit model for VSG considering current limiting is established, revealing the impact mechanisms of different Q-U controller on voltage transient support in phasor diagrams. Subsequently, the influence of fault current limiting on transient angle stability is discussed. Based on this, a transient control method for VSG considering both voltage support and transient angle stability is proposed. This method utilizes virtual capacitance and virtual resistance to modify Q-U and P-f controllers, respectively, to achieve reactive voltage support and transient angle suppression under faults. Furthermore, the application of the proposed method under fault current limiting is discussed, and the idea of fault current redistribution is proposed to enhance voltage support strength and reduce fault instability risk. Finally, hardware-in-loop experiments validate the correctness and effectiveness of the theoretical analysis and proposed.


  • Design of Transient Energy Regulation and Reuse Device of Flexible HVDC Transmission for Offshore Wind Power

    by Jun Mei, Renfei Wo, Jiawei Guo, Weiye Diao, Guanghua Wang

    The increasing significance of regulating transient energy and efficiently clearing DC short-circuit faults accompanies the rapid growth of offshore wind power. To address limitations such as single functionality and low device utilization in DC energy dissipation devices in flexible HVDC transmission systems for offshore wind power, this paper researches the technology of transient energy regulation and reuse, and a hybrid chopper topology with fault energy absorption and reuse function is proposed. The topology's structure, control strategy, and design methodology for electrical parameters are defined. Simulation is employed to verify the electrical characteristics of the hybrid chopper topology and its performance in an offshore wind power grid-connected system. When compared to traditional regulation methods, the proposed topology-based approach offers the advantages of energy absorption and fault location function for various DC faults. This method effectively maximizes the utilization of DC fault energy, resulting in higher device utilization rates and a broader range of functionalities.


  • A Combined Bus Port Impedance-Based Stability Criterion for DC Distribution Power Systems

    by Yaoyao Zhang, Xiaohui Qu, Gan Wang, Jun Mei, Herbert Ho-Ching Iu, Tyrone Fernando

    The impedance-based criteria are well known to assess the stability of DC systems by impedance measurement method. However, these criteria apply to the DC systems with the precondition of the interconnected converters or subsystems having no right-half-plane (RHP) poles, which is hard to guarantee and verify in a complicated DC distribution power system (DPS) with multiple parallel connected converters. To solve it, this paper proposes a combined bus port impedance based stability criterion for the DC DPS, where the number of RHP poles of the combined bus port impedance are proven zero definitely. Thus, the DC DPS is judged stable if and only if the trajectory of the proposed combined bus port impedance does not encircle the origin (0, 0), which is easily and feasibly determined by measuring port impedance of individual converter, without acquiring its inner information. Specifically, the oscillation frequency can be observed intuitively from the Bode plot of the combined bus port impedance. Three experimental systems are provided to validate the proposed stability criterion.


  • A Hybrid MMC Control Strategy to Enhance the Resilience of DC Transmission System

    by Jun Mei, Jiawei Guo, Weiye Diao, Renfei Wo, Linyuan Wang, Ao Liu, Guanghua Wang

    Offshore wind power through flexible dc transmission system faces the challenge of comprehensively improving the transient and steady-state performance. However, existing control strategies often fail to address both simultaneously. This article proposes a coordinated control strategy based on the hybrid modular multilevel converter that can enhance the transient and steady-state resilience of the flexible dc transmission system. First, the coupling relationship between the submodule capacitor voltage and active power is analyzed, and submodule virtual capacitance control (SVCC) is proposed to enhances the dc inertia. Second, the rate of change of dc current is introduced into the dc control loop. The virtual inductance control (VIC) is proposed, which can actively limit the rate of rise of dc current at the initial stage of dc fault. The link of the hysteresis comparator is designed to avoid frequent misoperation of VIC control caused by dc voltage disturbance. At the same time, the positive adjustment capability of the SVCC is used to reduce the fluctuation of the capacitor voltage during the dc fault ride-through process, avoid the switching of the working mode of the ac loop controller, and realize the cooperative control of the transient and steady-state performance. Finally, the effectiveness of the proposed control strategy is verified through simulations and experiment.


  • A Novel Coordinated Control Strategy for LCC/VSC Hybrid DC Distribution Power System

    by Yubin Pang, Xiaohui Qu, Zijun Ren, Jun Mei

    For the multi-terminal DC distribution power system (DPS), line commutated converter (LCC) and voltage source converter (VSC) can be used in different terminals to take full advantage of large capacity of LCC and control flexibility of VSC. However, there are usually a large number of DC loads and renewable energy sources connected to the DC distribution system, which will bring large, rapid and frequent power fluctuation. It is difficult to maintain the power balance and DC bus voltage due to the slow response of LCC and small capacity of VSC. To solve it, this paper proposes a steady-state power allocation ratio for LCC and VSC as well as the switching strategy. By this way, the large-capacity LCC can be timely put into operation to suffer most power and save the investment, or shut down to avoid the discontinuous current at low load condition, thus that the DC voltage fluctuation can be reduced. To further decrease the voltage fluctuation due to small inertia of DC DPS, a dynamic inertia coordinated control strategy of LCC/VSC based on virtual DC generator (VDG) method is also proposed in this paper. By designing a reasonable low-pass filter (LPF), the slow LCC responds to most of low-frequency armature current in VDG, and small-capacity VSC responds to a small low-frequency and all high-frequency components. Hence, the inertia increases fully utilizing the characteristics of LCC and VSC. Through the above steady-state and transient control strategy, the DC bus voltage can be stabilized well, while disturbance to the AC system can also be effectively reduced. Finally, a simulation model of a dual-terminal DC DPS is built to verify the proposed strategy.


  • Open Access

    Hierarchical optimization of current‐limiting devices with discrete parameters in multi‐terminal DC power grids

    by Jun Mei, Xiaoyu Chen, Bingtian Zhang, Sen Zhang, Liupeng Lei, Jiawei Guo

    Optimizing current‐limiting devices (CLDs) in multi‐terminal DC grids is essential to limit the fault current while reducing the cost of devices. However, current studies mainly focus on optimizing CLDs based on continuous parameters in simple DC grids, which cannot meet the optimal efficiency demand of CLDs in complex multi‐terminal DC grids and results in each CLD needing to be customized separately, increasing the production cost of devices. Therefore, to improve the optimal efficiency under complex multi‐terminal DC grids, the principle of fault area division based on the coupled degree of converter and DC grid and the corresponding hierarchical optimal implementation schemes of CLDs are proposed first. Then, the effects of CLD parameters on the fault current are analysed, and their sensitive ranges of current‐limiting are revealed. In combination with the error range of inductance, the principle of discrete parameter design of current‐limiting inductance parameters is put forward. Next, the discrete parameters of CLDs are optimized by an intelligence algorithm. Finally, the hierarchical optimal method of CLDs based on discrete parameters is validated on a six‐terminal DC grid in PSCAD/EMTDC. The proposed method can satisfy the demand of current‐limiting, which is more in line with the standardization requirements in practice.