Enhancing Laser Damage Resistance in TiO2 Films: Dual-Additive Strategy Using High Thermal Conductivity Agents and Long-Chain Organic Compounds
Open Access
Abstract
The laser damage resistance of optical films holds significant practical importance, as it largely determines both the maximum power output of laser systems and the overall stability of the entire optical assembly. A comprehensive investigation was conducted to examine the influence of both single additives—acetylacetone (ACAC) and diethanolamine (DEA)—and dual-additive systems, specifically ACAC combined with polyethylene glycol 200 (PEG 200) and DEA combined with PEG 200, on TiO2 film properties and their laser-induced damage behavior under 1064 nm irradiation. It demonstrated that the films fabricated using ACAC exhibited smoother surfaces. Nevertheless, the sol prepared with DEA was more stable, resulting in films with superior optical properties and an enhanced laser-induced damage threshold (LIDT). The incorporation of dual additives further improved the films’ LIDT. Specifically, the film with DEA and PEG 200 achieved the highest LIDT, reaching 21.5 J/cm2. Moreover, all films exhibited defect-induced damage, yet distinct damage morphologies were observed across different samples. The single-additive films predominantly displayed stress-type damage patterns, whereas the dual-additive films manifested melting-type damage characteristics. Furthermore, through a combination of experiments and calculations, it was revealed that the reasons why the film with DEA and PEG 200 achieved the highest LIDT were twofold: first, the high thermal conductivity of DEA reduced the maximum temperature at the defect center within the film; second, the long molecular chains of PEG 200 created a looser film structure that better mitigated damage caused by stress and expansion during laser irradiation. This study presents a promising approach to enhancing the LIDT through the strategic selection of additives with high thermal conductivity while simultaneously incorporating organic compounds with long molecular chains to develop effective dual-additive films.Keywords
Funding Information
- National Natural Science Foundation of China (52372251, gx2024005)
- Xuzhou ‘343’ Industrial Development Project (52372251, gx2024005)
This publication has 29 references indexed in Scilit:
- Sol-gel-derived WO3 thin films with structure-dependent NO2 sensing propertiesCeramics International, 2024
- Nb2O5 film optical properties and laser-induced damage by phase-change-driven tuningCeramics International, 2024
- Investigation of the role of pulse duration and film thickness on the damage threshold of metal thin films irradiated with ultrashort laser pulsesApplied Surface Science, 2024
- Preparation and electrical properties of ultra-thin Bi2212 films by sol-gel methodColloids and Surfaces A: Physicochemical and Engineering Aspects, 2023
- Structural and optical properties of Fe@C doped TiO2 thin films prepared by sol–gel methodInorganic Chemistry Communications, 2023
- Enhancement of laser-induced damage threshold of optical coatings by ion-beam etching in vacuum environmentOptik, 2020
- Composition-sensitive growth kinetics and dispersive optical properties of thin HfxTi1−xO2 (0 ≤ x ≤ 1) films prepared by the ALD methodJournal of Materials Science: Materials in Electronics, 2018
- Comparative studies on the laser-induced damage of TiO2 films with different additives and thicknessOptik, 2015
- The effect of time-temperature gradient annealing on microstructure, optical properties and laser-induced damage threshold of TiO2 thin filmsOptik, 2013
- Polyvinylpyrrolidone/ZrO2-based sol–gel films applied in highly reflective mirrors for inertial confinement fusionJournal of Sol-Gel Science and Technology, 2008