Hanzhuo Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hanzhuo Zhang has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Yihan Ling
5 shared publications- Zhonghao Jiang
Key Laboratory of Automobile Materials, College of Materials Science and Engineering, Jilin University, Nanling Campus, Changchun 130025, China
5 shared publications Kang Yong
4 shared publicationsXuemei Ou
School of Materials and Physics, China University of Mining and Technology, Xuzhou, People’s Republic of China
4 shared publicationsJianshe Lian
Jilin University Key Laboratory of Automobile Materials, College of Materials Science and Engineering Nanling Campus, Changchun 130025, People’s Republic of China
3 shared publicationsJinxun Han
School of Materials and Physics, China University of Mining and Technology, Xuzhou, People’s Republic of China
3 shared publications
Latest Publications
- 27 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (25) , 46187-46197
Tailoring sillenite Bi25FeO39 microcrystals into tetrahedral and cubic series and exploring their electrical performance after sintering
- 27 July 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (25) , 46187-46197
Tailoring sillenite Bi25FeO39 microcrystals into tetrahedral and cubic series and exploring their electrical performance after sintering
- 29 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (6) , 6882-6891
Controllable synthesis of Bi3.2Mo0.8O7.5 nanoparticles and Bi2MoO6 nanoplates in a hydrothermal process with dielectric and ferroelectric explorations after sintering at 600 °C
- 29 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (6) , 6882-6891
Controllable synthesis of Bi3.2Mo0.8O7.5 nanoparticles and Bi2MoO6 nanoplates in a hydrothermal process with dielectric and ferroelectric explorations after sintering at 600 °C
- Open Access
Enhancing Laser Damage Resistance in TiO2 Films: Dual-Additive Strategy Using High Thermal Conductivity Agents and Long-Chain Organic Compounds
The laser damage resistance of optical films holds significant practical importance, as it largely determines both the maximum power output of laser systems and the overall stability of the entire optical assembly. A comprehensive investigation was conducted to examine the influence of both single additives—acetylacetone (ACAC) and diethanolamine (DEA)—and dual-additive systems, specifically ACAC combined with polyethylene glycol 200 (PEG 200) and DEA combined with PEG 200, on TiO2 film properties and their laser-induced damage behavior under 1064 nm irradiation. It demonstrated that the films fabricated using ACAC exhibited smoother surfaces. Nevertheless, the sol prepared with DEA was more stable, resulting in films with superior optical properties and an enhanced laser-induced damage threshold (LIDT). The incorporation of dual additives further improved the films’ LIDT. Specifically, the film with DEA and PEG 200 achieved the highest LIDT, reaching 21.5 J/cm2. Moreover, all films exhibited defect-induced damage, yet distinct damage morphologies were observed across different samples. The single-additive films predominantly displayed stress-type damage patterns, whereas the dual-additive films manifested melting-type damage characteristics. Furthermore, through a combination of experiments and calculations, it was revealed that the reasons why the film with DEA and PEG 200 achieved the highest LIDT were twofold: first, the high thermal conductivity of DEA reduced the maximum temperature at the defect center within the film; second, the long molecular chains of PEG 200 created a looser film structure that better mitigated damage caused by stress and expansion during laser irradiation. This study presents a promising approach to enhancing the LIDT through the strategic selection of additives with high thermal conductivity while simultaneously incorporating organic compounds with long molecular chains to develop effective dual-additive films.
Open AccessEnhancing Laser Damage Resistance in TiO2 Films: Dual-Additive Strategy Using High Thermal Conductivity Agents and Long-Chain Organic Compounds
The laser damage resistance of optical films holds significant practical importance, as it largely determines both the maximum power output of laser systems and the overall stability of the entire optical assembly. A comprehensive investigation was conducted to examine the influence of both single additives—acetylacetone (ACAC) and diethanolamine (DEA)—and dual-additive systems, specifically ACAC combined with polyethylene glycol 200 (PEG 200) and DEA combined with PEG 200, on TiO2 film properties and their laser-induced damage behavior under 1064 nm irradiation. It demonstrated that the films fabricated using ACAC exhibited smoother surfaces. Nevertheless, the sol prepared with DEA was more stable, resulting in films with superior optical properties and an enhanced laser-induced damage threshold (LIDT). The incorporation of dual additives further improved the films’ LIDT. Specifically, the film with DEA and PEG 200 achieved the highest LIDT, reaching 21.5 J/cm2. Moreover, all films exhibited defect-induced damage, yet distinct damage morphologies were observed across different samples. The single-additive films predominantly displayed stress-type damage patterns, whereas the dual-additive films manifested melting-type damage characteristics. Furthermore, through a combination of experiments and calculations, it was revealed that the reasons why the film with DEA and PEG 200 achieved the highest LIDT were twofold: first, the high thermal conductivity of DEA reduced the maximum temperature at the defect center within the film; second, the long molecular chains of PEG 200 created a looser film structure that better mitigated damage caused by stress and expansion during laser irradiation. This study presents a promising approach to enhancing the LIDT through the strategic selection of additives with high thermal conductivity while simultaneously incorporating organic compounds with long molecular chains to develop effective dual-additive films.
- 27 January 2025
- Published by Elsevier in Materials Letters
- Vol. 384
Co3O4/SnO2 heterojunctions formed as porous nanocubes with remarkable sensitivity and selectivity to acetone gas
- 27 January 2025
- Published by Elsevier in Materials Letters
- Vol. 384
Co3O4/SnO2 heterojunctions formed as porous nanocubes with remarkable sensitivity and selectivity to acetone gas
- Open Access
Magnetite Nanoparticles In-Situ Grown and Clustered on Reduced Graphene Oxide for Supercapacitor Electrodes
Fe3O4 nanoparticles with average sizes of 3–8 nm were in-situ grown and self-assembled as homogeneous clusters on reduced graphene oxide (RGO) via coprecipitation with some additives, where RGO sheets were expanded from restacking and an increased surface area was obtained. The crystallization, purity and growth evolution of as-prepared Fe3O4/RGO nanocomposites were examined and discussed. Supercapacitor performance was investigated in a series of electrochemical tests and compared with pure Fe3O4. In 1 M KOH electrolyte, a high specific capacitance of 317.4 F g−1 at current density of 0.5 A g−1 was achieved, with the cycling stability remaining at 86.9% after 5500 cycles. The improved electrochemical properties of Fe3O4/RGO nanocomposites can be attributed to high electron transport, increased interfaces and positive synergistic effects between Fe3O4 and RGO.
Open AccessMagnetite Nanoparticles In-Situ Grown and Clustered on Reduced Graphene Oxide for Supercapacitor Electrodes
Fe3O4 nanoparticles with average sizes of 3–8 nm were in-situ grown and self-assembled as homogeneous clusters on reduced graphene oxide (RGO) via coprecipitation with some additives, where RGO sheets were expanded from restacking and an increased surface area was obtained. The crystallization, purity and growth evolution of as-prepared Fe3O4/RGO nanocomposites were examined and discussed. Supercapacitor performance was investigated in a series of electrochemical tests and compared with pure Fe3O4. In 1 M KOH electrolyte, a high specific capacitance of 317.4 F g−1 at current density of 0.5 A g−1 was achieved, with the cycling stability remaining at 86.9% after 5500 cycles. The improved electrochemical properties of Fe3O4/RGO nanocomposites can be attributed to high electron transport, increased interfaces and positive synergistic effects between Fe3O4 and RGO.
- 9 July 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (21) , 31519-31527
Hydrothermal synthesis of hierarchical CuBi2O4 microspheres with improved gas sensitivity
- 9 July 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (21) , 31519-31527
Hydrothermal synthesis of hierarchical CuBi2O4 microspheres with improved gas sensitivity
- 22 February 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (9) , 5566-5576
Self-assembled NiCo2O4 microspheres for hybrid supercapacitor applications
- 22 February 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (9) , 5566-5576
Self-assembled NiCo2O4 microspheres for hybrid supercapacitor applications
- 24 May 2021
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 51 (8) , 1137-1144
Improved microwave absorption of Co-P/pollen composites synthesized by electroless plating
- 24 May 2021
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 51 (8) , 1137-1144
Improved microwave absorption of Co-P/pollen composites synthesized by electroless plating
- 1 April 2021
- Published by Elsevier in Ceramics International
- Vol. 47 (7) , 9941-9947
Thermal, magnetic and photoelectrical behaviors of sillenite Bi25FeO39 microcrystals
- 1 April 2021
- Published by Elsevier in Ceramics International
- Vol. 47 (7) , 9941-9947
Thermal, magnetic and photoelectrical behaviors of sillenite Bi25FeO39 microcrystals