Comparative Performance Analysis of Conventional and Strategic PWM Shoot-Through Placement in Maximum Boost-Controlled Z-Source Inverters
Open Access
Abstract
The Z-source inverter (ZSI) has emerged as an effective single-stage power conversion topology for renewable energy applications owing to its inherent capability to perform both voltage buck and boost operations. However, the shoot-through states required for voltage boosting introduce additional harmonic distortion that can degrade output power quality and increase the dependence on passive filtering. This paper presents a comparative performance analysis of conventional and strategic PWM shoot-through placement within the maximum boost control (MBC) framework for three-phase Z-source inverters. A strategic shoot-through placement approach, referred to as modified maximum boost control (MMBC), is proposed to redistribute shoot-through intervals while using the conventional theoretical shoot-through duty ratio as the operating reference. Both control strategies were modelled and evaluated in MATLAB/Simulink R2024a version under identical operating conditions. Their performance was assessed using voltage total harmonic distortion (THDV), fundamental output voltage magnitude, and the corresponding voltage gain and boost factor relationships. The simulation results indicate that the proposed MMBC achieved a minimum THDV of approximately 1.73%, compared with 4.05% obtained using conventional MBC. The improved harmonic performance was accompanied by a reduction in the output voltage magnitude, highlighting the trade-off between power quality enhancement and voltage utilisation. These findings demonstrate that strategic PWM shoot-through placement can substantially improve the output voltage power quality of Z-source inverters, indicating its potential applicability to renewable energy conversion systems where reduced output voltage harmonic distortion is prioritised.Keywords
All Related Versions
This publication has 11 references indexed in Scilit:
- A review on modulation techniques of Quasi-Z-source inverter for grid-connected photovoltaic systemse-Prime - Advances in Electrical Engineering, Electronics and Energy, 2024
- Improved Carrier-Based Modulation for the Single-Phase T-Type qZ Source InverterElectronics, 2024
- A quantitative harmonics analysis approach for sinusoidal pulse‐width‐modulation based Z‐source invertersIET Power Electronics, 2022
- Modulation Schemes of the Three-Phase Impedance Source Inverters—Part II: Comparative AssessmentIEEE Transactions on Industrial Electronics, 2018
- Modulation Schemes of the Three-Phase Impedance Source Inverters—Part I: Classification and ReviewIEEE Transactions on Industrial Electronics, 2018
- Three-level three-phase quasi-Z-source neutral-point-clamped inverter with novel modulation technique for photovoltaic applicationElectric Power Systems Research, 2016
- Impedance-Source Networks for Electric Power Conversion Part II: Review of Control and Modulation TechniquesIEEE Transactions on Power Electronics, 2014
- Constant boost control of the Z-source inverter to minimize current ripple and voltage stressIEEE Transactions on Industry Applications, 2006
- Maximum Boost Control of the Z-Source InverterIEEE Transactions on Power Electronics, 2005
- Z-source inverterIEEE Transactions on Industry Applications, 2003