Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mbulelo Siyabonga Perfect Ngongoma has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Performance Analysis of Conventional and Strategic PWM Shoot-Through Placement in Maximum Boost-Controlled Z-Source Inverters

    by Tusetso Rethabile Johannes, Musasa Kabeya, Mbulelo Siyabonga Perfect Ngongoma

    The Z-source inverter (ZSI) has emerged as an effective single-stage power conversion topology for renewable energy applications owing to its inherent capability to perform both voltage buck and boost operations. However, the shoot-through states required for voltage boosting introduce additional harmonic distortion that can degrade output power quality and increase the dependence on passive filtering. This paper presents a comparative performance analysis of conventional and strategic PWM shoot-through placement within the maximum boost control (MBC) framework for three-phase Z-source inverters. A strategic shoot-through placement approach, referred to as modified maximum boost control (MMBC), is proposed to redistribute shoot-through intervals while using the conventional theoretical shoot-through duty ratio as the operating reference. Both control strategies were modelled and evaluated in MATLAB/Simulink R2024a version under identical operating conditions. Their performance was assessed using voltage total harmonic distortion (THDV), fundamental output voltage magnitude, and the corresponding voltage gain and boost factor relationships. The simulation results indicate that the proposed MMBC achieved a minimum THDV of approximately 1.73%, compared with 4.05% obtained using conventional MBC. The improved harmonic performance was accompanied by a reduction in the output voltage magnitude, highlighting the trade-off between power quality enhancement and voltage utilisation. These findings demonstrate that strategic PWM shoot-through placement can substantially improve the output voltage power quality of Z-source inverters, indicating its potential applicability to renewable energy conversion systems where reduced output voltage harmonic distortion is prioritised.

  • Open Access

    Design, Implementation and Functional Validation of Raspberry Pi 5–MATLAB Dual-Channel Telemetry System for Graywater Process-Flow Monitoring

    by Mbulelo Siyabonga Perfect Ngongoma

    Pump status is not enough. An operator needs both the instantaneous rate and accumulated volume on the intended process path, together with the quantity diverted through overflow. This paper reports on a dual-channel telemetry system built around Raspberry Pi 5 and a networked MATLAB R2025b supervisory interface. The prototype uses two HKD YF-B5 G1/2-inch brass Hall-effect flow meters, one on the main line and another on the overflow line. A custom power-conditioning assembly accepts 12 VDC and establishes 12 V, 5 V and 3.3 V rails for sensor excitation, processor and relay interfacing, and GPIO-compatible signaling. Before GPIO 26 and GPIO 16 receive the sensor pulses, the interface circuit conditions them. MATLAB detects rising edges, calculates the inter-pulse period, converts pulse frequency to channel flow, integrates accumulated volume and updates four animated trends with a live numerical table. Timed 10 L collections gave mean reference flow rates of 9.003 L/min on the main route and 14.657 L/min on the overflow route. Single-point volume checks produced errors of 3.53% at 5.000 L and 9.25% at 2.000 L. A coefficient error in the overflow accumulator was corrected, and a fresh 2.000 L run returned 2.185 L. Validation remains limited to gravity-fed operation.

  • Open Access

    Design and Modeling of a Shunt Capacitor-Boosted Z-Source Inverter (SCB-ZSI)

    by Mbulelo S. P. Ngongoma, Zephania Philani Khumalo

    Various inverter applications such as electronic vehicles, renewable energy systems, and uninterrupted power supplies have been the motive behind the increasing focus on the DC-AC inverters field. Therefore, DC-AC inverters have been evolving with the recent topology being the Z-source inverters (ZSIs). Though the ZSI overcame most of the limitations faced by the previous topologies such as the Voltage-Source Inverters (VSIs) and Current-Source Inverters (CSIs), they had shortcomings such as the increase in switching devices’ voltage stress and hence the deterioration of power quality with the increase in the boost factor. As a result, several ZSI-based topologies have been proposed in the literature to further improve the performance of a ZSI. This paper also proposes a different Z-source inverter topology called the Shunt Capacitor-Boosted Z-Source Inverter (SCB-ZSI) which seeks to improve the boost factor and lower the voltage stress. This inverter strategically adds two shunt capacitors on the impedance network of a traditional Z-source inverter, hence the Shunt Capacitor-Boosted-ZSI. The SCB-ZSI was mathematically modeled and simulated on MATLAB Simulink R2024a version. The SCB-ZSI was found to have a high boost factor compared to the ZSI for the same input DC voltage and modulation index. The SCB-ZSI was also found to incur less switching voltage stress across the switching devices compared to the ZSI for the same input DC voltage and modulation index. The simulation test results showed that the selection of shunt capacitors of a ZSI at 1% of those of the original ZSI improves the boost factor by 56% and reduces the switch voltage stress ration by 40% on an SCB-ZSI for the same set of input parameters. Though the SCB-ZSI is one of the promising ZSI-based inverter topologies, more work still has to be done before they can be industrially applied, such as developing an algorithm to design the shunt capacitors.

  • Open Access

    Comparative Performance Analysis of Conventional and Strategic PWM Shoot-Through Placement in Maximum Boost-Controlled Z-Source Inverters

    by Tusetso Rethabile Johannes, Musasa Kabeya, Mbulelelo Siyabonga Perfect Ngongoma

    The Z-source inverter (ZSI) has emerged as an effective single-stage power conversion topology for renewable energy applications owing to its inherent capability to perform both voltage buck and boost operations. However, the shoot-through states required to achieve voltage boosting introduce additional harmonic distortion that can degrade output power quality and increase the dependence on passive filtering. This paper presents a comparative performance analysis of conventional and strategic PWM shoot-through placement within the Maximum Boost Control (MBC) framework for three-phase Z-source inverters. A strategic shoot-through placement approach, referred to as Modified Maximum Boost Control (MMBC), is proposed to redistribute shoot-through intervals without compromising the voltage boost capability. Both control strategies were modelled and evaluated in MATLAB/Simulink under identical operating conditions. Their performance was assessed using Voltage Total Harmonic Distortion (THDV), voltage gain, and boost factor as the primary evaluation metrics. The simulation results indicate that the proposed MMBC achieved a minimum THDV of approximately 1.69%, compared with 4.05% obtained using conventional MBC. The improved harmonic performance was accompanied by a reduction in the output voltage magnitude, highlighting the trade-off between power quality enhancement and voltage utilisation. These findings demonstrate that strategic PWM shoot-through placement can substantially enhance the power quality of Z-source inverters and reduce harmonic filtering requirements, making the proposed approach suitable for renewable energy conversion applications.

  • An Overview of Frequency and Power Changes Quantifition in a Microgrid; Multiply Distribution Generators

    by Phumelele B Mhlongo, Mbulelo S P Ngongoma, Musasa Kabeya

    The increase in the global warming level, the distribution of generators based on renewable energy, is increasing to play the dominant role in electricity production. Distribution generators based on solar energy (photovoltaic) and wind turban are gaining significant motivation in the future. Microgrid is a new energy distribution techniques system that is connected to renewable energy integration. It consists of many distributed generators that interface to the grid through a power electronic converter, has elevated anxiety about safe operation, and protects the equipment. Several control techniques have been used to attract the stability of the Microgrid for proper load sharing. While parallel converter has been controlled to deliver desired real power and reactive power to the system. The native signal is being used as feedback to control converters, since in a real system the diffidence between the converter may make the inter-communication impossible. Real and reactive power sharing can be achieved by controlling two autonomous quantities, frequency, and fundamental voltage magnitude. The review and the approach of power-sharing control principles and the comparison of their respective advantages and disadvantages.

  • Open Access

    Design and Modeling of a Multi-camera-based Disease Detection Model

    by Mbulelo Ngongoma, Musasa Kabeya, Katleho Moloi

    A state-of-the-art approach for plant disease detection systems is discussed in this paper. Most proposed disease detection models in literature utilize single infeed cameras to capture the images of sample plant organs for classification. Single-input cameras might compromise the classification accuracy of these models depending on which plant organ is being used. Single input camera classification models have operated with high classification accuracy and efficiency with leaf samples because of their flat surface area nature, however, this is not always the case for fruit samples because of their general spherical or cylindrical nature such as oranges or bananas. The symptoms of a disease on the surface area of a sample fruit might not be distributed evenly, hence a single input camera sensor might miss the vital diseased part if the sample is orientated such that the diseased area is directly opposing to the line of sight of the camera sensor, which can consequently lead to an incorrect classification of that sample under evaluation. Hence, this study has proposed a multi-camera input fruit disease classification model aiming to solve this problem. Citrus orange fruits were used to demonstrate the capability of the proposed model to classify healthy and black rot-affected orange samples. A healthy sample and two black-rot-affected oranges, one with even and the other with uneven distribution of black rot symptoms, were put under evaluation of the proposed multi-camera input model and the classification accuracy was 100% when utilizing a deep learning Convolutional Neural Network classification algorithm.

  • Open Access

    A Review of Plant Disease Detection Systems for Farming Applications

    by Mbulelo S. P. Ngongoma, Musasa Kabeya, Katleho Moloi

    The globe and more particularly the economically developed regions of the world are currently in the era of the Fourth Industrial Revolution (4IR). Conversely, the economically developing regions in the world (and more particularly the African continent) have not yet even fully passed through the Third Industrial Revolution (3IR) wave, and Africa’s economy is still heavily dependent on the agricultural field. On the other hand, the state of global food insecurity is worsening on an annual basis thanks to the exponential growth in the global human population, which continuously heightens the food demand in both quantity and quality. This justifies the significance of the focus on digitizing agricultural practices to improve the farm yield to meet the steep food demand and stabilize the economies of the African continent and countries such as India that are dependent on the agricultural sector to some extent. Technological advances in precision agriculture are already improving farm yields, although several opportunities for further improvement still exist. This study evaluated plant disease detection models (in particular, those over the past two decades) while aiming to gauge the status of the research in this area and identify the opportunities for further research. This study realized that little literature has discussed the real-time monitoring of the onset signs of diseases before they spread throughout the whole plant. There was also substantially less focus on real-time mitigation measures such as actuation operations, spraying pesticides, spraying fertilizers, etc., once a disease was identified. Very little research has focused on the combination of monitoring and phenotyping functions into one model capable of multiple tasks. Hence, this study highlighted a few opportunities for further focus.


  • Open Access

    Maximizing a Farm Yield Through Precision Agriculture utilizing Fourth Industrial Revolution (4IR) Tools and Space Technology

    by Mbulelo Siyabonga Perfect Ngongoma, Musasa Kabeya, Katleho Moloi

    The globe and more particularly the economically developed regions of the world are currently in the era of the fourth Industrial revolution (4IR). Conversely; the economically developing regions in the world and more particularly the African continent have not yet even fully passed through the Third Industrial Revolution (3IR) wave and its economy is still heavily dependent on the agricultural field. On the other hand, the state of global food insecurity is worsening on an annual basis thanks to the exponential growth of the global human population which continuously heightens the food demand in both quantity and quality. This justifies the significance of the focus on digitizing agricultural practices to improve the farm yield to meet up with the steep food demand and stabilize the economy of the African continent and countries like India whose economy is mainly dependent on Agriculture. The tools we have at our disposal to utilize in the digitization of farming practices include space technology and Global Navigation and Satellite System (GNSS) in particular, Machine learning (ML), precision agriculture and communication systems such as the Internet of Things (IoT) and Information And Communication Technologies (ICT). The most pressing challenges in the farming field include the monitoring of diseases, pests, weeds and nutrient deficiencies in the crops as early detection translates to swift and timely correction actions and hence more yield at the end of a farming cycle. Vast opportunities in the field of precision agriculture still exist that can amount to further research studies such as the lack of real-time monitoring and real-time corrective action focus.