The Dispersion and Hydration Improvement of Silica Fume in UHPC by Carboxylic Agents
Open Access
Abstract
Silica fume (SF) is an essential component in ultra-high-performance concrete (UHPC) to compact the matrix, but the nucleus effect also causes rapid hydration, which results in high heat release and large shrinkage. In this paper, the carboxylic agents, including polyacrylic acid and polycarboxylate superplasticizer, were used to surface modify SF to adjust the activity to mitigate hydration at an early time and to promote continuous hydration for a long period. The surface and dispersion properties of modified SF (MSF), as well as the strength and pore structure of UHPC, were studied, and the stability of the modification was also investigated. The results demonstrated that, after treatment, the carboxylic groups were grafted on the SF surface, the dispersion of SF was improved due to the increased negative pentanal of the particle surface and the steric hindrance effect, the early hydration was delayed about 3–5 h, and the hydration heat release was also mitigated. The compressive strength of UHPC with MSF reached a maximum of 138.7 MPa at 3 days, which decreased about 3.7% more than the plain group, while flexural strength varied insignificantly. More pores and cracks were observed in the matrix with MSF, and the hydration degree was promoted with MSF addition. The grafted group on SF fell off under an alkali environment after 1 h.Keywords
Funding Information
- National Natural Science Foundation (51678142)
This publication has 46 references indexed in Scilit:
- Dispersion behavior of silica fume in cementitious suspensionsCement and Concrete Composites, 2024
- Effect of dosage of silica fume on the macro-performance and micro/nanostructure of seawater Portland cement pastes prepared with an ultra-low water-to-binder ratioCement and Concrete Composites, 2022
- Study on alkylsilane-incorporated cement composites: Hydration mechanism and mechanical properties effectsCement and Concrete Composites, 2021
- Activation effects and micro quantitative characterization of high-volume ground granulated blast furnace slag in cement-based compositesCement and Concrete Composites, 2020
- Surface Modification of Nano‐SiO 2 Particles with Polycarboxylate Ether‐Based Superplasticizer under Microwave IrradiationChemistrySelect, 2017
- Characterizing cement paste containing SRA modified nanoSiO2 and evaluating its strength development and shrinkage behaviorCement and Concrete Composites, 2017
- Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A–CaSO4 hydrationCement and Concrete Research, 2015
- Phase development in normal and ultra high performance cementitious systems by quantitative X-ray analysis and thermoanalytical methodsCement and Concrete Research, 2009
- Bending and compressive behaviours of a new cement compositeCement and Concrete Research, 2005
- Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methodsCement and Concrete Research, 2004