Improving the quality of petrol fuel for internal combustion engines
Open Access
- 31 July 2025
- journal article
- Published by Warsaw University of Life Sciences - SGGW Press in Acta Scientiarum Polonorum. Architectura
- Vol. 24, 114-122
Abstract
The design of an automobile electromagnetic vibration cavitator created for the cavitation treatment of water-petrol fuel is described. Its use will allow not only saving fuel, but also increasing the completeness of combustion of the water-petrol fuel mixture; in other words, it will contribute to improving the environment. An experimental study of effectiveness of the fuel mixture cavitation treatment was carried out using A95 petrol and distilled water for automobile internal combustion engines. Cavitation treatment of the fuel mixture with a water-to-petrol ratio of 17 to 83% allows for an increase in the savings of expensive petrol by 15‒20% during the operation of engines on flat and downhill roads and in city traffic jams. At the same time, the engine power is reduced by only 6‒7% due to the cavitation treatment.Keywords
This publication has 6 references indexed in Scilit:
- Improving the quality of petrol fuel for internal combustion enginesActa Scientiarum Polonorum. Architectura, 2025
- The effect of additive on combustion characteristics and cycle to cycle variations on si engine fueled by gasoline and bioethanolEastern-European Journal of Enterprise Technologies, 2018
- Air-fuel mixing and combustion behavior of gasoline-ethanol blends in a GDI wall-guided turbocharged multi-cylinder optical engineRenewable Energy, 2016
- Experimental study on sparking ignition engine performance for optimal mixing ratio of ethanol–gasoline blended fuelsApplied Thermal Engineering, 2016
- Dual-Fuel Spark Ignition (DFSI) combustion fuelled with different alcohols and gasoline for fuel efficiencyFuel, 2015
- Comparative study on alcohols–gasoline and gasoline–alcohols dual-fuel spark ignition (DFSI) combustion for high load extension and high fuel efficiencyEnergy, 2015