Assessing the mechanical properties and workability of concretes with stone powder as a sustainable alternative material to natural sand
Authors:
- Thalles Murilo Santos de AlmeidaTAThalles Murilo Santos de Almeida
- Wanderson Santos de JesusWJWanderson Santos de Jesus
- Marcelo Tramontin SouzaMarcelo Tramontin Souza
- Flávia Araujo AzevedoFAFlávia Araujo Azevedo
- Suânia Fabiele Moitinho da SilvaSSSuânia Fabiele Moitinho da Silva
- Ramon Santos SouzaRSRamon Santos Souza
- José Renato de Castro PessôaJPJosé Renato de Castro Pessôa
Open Access
- 1 January 2025
- journal article
- metallurgy and-materials
- Published by FapUNIFESP (SciELO) in REM - International Engineering Journal
- Vol. 78 (spe1) , e230171
Abstract
The extraction of sand from riverbeds through dredging is a common practice in construction and has given rise to significant environmental repercussions. Sand removal contributes to heightened turbidity and alterations in watercourses, reshaping the original channels due to equipment utilization, and disrupting their flow. In response to these challenges, crushed stone dust emerges as a sustainable alternative material for partially or entirely replacing natural sand in concrete production. This study aimed to evaluate the mechanical properties and workability of concrete with a characteristic compressive strength of 25 MPa, employing total replacement (100% crushed stone dust) and partial replacement (50% crushed stone dust and 50% sand). The materials utilized encompassed crushed stone, natural sand, Portland cement CP II F - 32, crushed stone dust, and a superplasticizer additive. The results indicated no significant difference in compressive strength (P < 0.05), with values of 36.85 MPa and 30.31 MPa for total and partial replacement, respectively, comparable to the reference concrete (33.47 MPa). In terms of tensile strength by split tensile testing, concrete with total and partial replacement achieved 3.09 MPa and 3.23 MPa, respectively, while the reference mix recorded 3.31 MPa. Total replacement posed challenges to the workability of fresh concrete, necessitating a higher dosage of superplasticizer. In conclusion, crushed stone dust demonstrates its capacity to substitute natural sand, either entirely or partially, while upholding mechanical properties comparable to traditional concrete. However, careful consideration of the impact on concrete workability is essential when opting for total replacement of the fine aggregate.Keywords
This publication has 17 references indexed in Scilit:
- Influence of limestone powder mixing method on properties of manufactured sand concreteCase Studies in Construction Materials, 2024
- Performance evaluation of ternary blended cement concrete partially replacement of natural sand with granite quarry dustHybrid Advances, 2023
- Assessment of mechanical properties of C80 concrete prepared with different stone powder contents by a statistical analysisJournal of Building Engineering, 2022
- Effect of Waste Glass Powder and Stone Dust on the Characteristics of ConcreteInternational Journal for Research in Applied Science and Engineering Technology, 2021
- Influence of brick dust, stone dust, and recycled fine aggregate on properties of natural and recycled aggregate concreteStructural Concrete, 2020
- Influence of stone processing dust on mechanical, durability and sustainability of concreteConstruction and Building Materials, 2019
- Effects of crushed stone waste as fine aggregate on mortar and concrete propertiesIOP Conference Series: Materials Science and Engineering, 2019
- An Experimental study on Crushed Stone Dust as Fine Aggregate in Cement ConcreteMaterials Today: Proceedings, 2018
- Perfil ambiental qualitativo da extração de areia em cursos d'águaRevista Árvore, 2005
- The use of quarry dust for SCC applicationsCement and Concrete Research, 2002