Effect of curing temperature on mechanical strength, hydrophobicity, chemical and thermal stability of Cardanol‐derived Resol‐polyurethane films/coatings
Authors:
- ShailySHShaily
- Manawwer AlamMAManawwer Alam
- Nahid NishatNNNahid Nishat
- 7 May 2022
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 62 (7) , 2185-2196
Abstract
The utilization of renewable resources has increased over the last few years in different fields due to environmental and economic concerns. Cashew nut shell liquid (CNSL) is cheaper, abundantly available, and an eco‐friendly agro‐waste product, which holds the potential to significantly replace petro‐based phenols. Present work focusses on the preparation of (i) Cardanol‐based polyols (resol) in different ratios [Cardanol: formaldehyde 1:1.2(Rol1), 1:1.6 (Rol2), and 1:2.0 (Rol3)], (ii) their polyurethanes, and (iii) freestanding, transparent, flexible and thin films/coatings obtained through “Green” route. The effect of curing temperature on the overall performance of films/coatings has also been investigated. The films/coatings obtained by baking at 80 ± 5°C (BK‐Rol1/2‐PU) exhibited improved physicomechanical performance compared with films/coatings obtained at room temperature (RT‐Rol1/2‐PU). BK‐Rol1/2‐PU and RT‐Rol1/2‐PU demonstrated excellent chemical stability. XRD revealed that both BK‐Rol2‐PU and RT‐Rol1/2‐PU films were amorphous and TGA confirmed that BK‐Rol2‐PU showed higher thermal stability compared with RT‐Rol2‐PU films. The contact angle measurements indicated a higher hydrophobic character of BK‐Rol1/2‐PU (96°) relative to RT‐Rol1/2‐PU (90°). These polyurethane films/coatings can be used for protective and decorative purposes. As BK‐Rol1/2‐PU films/coatings outperformed RT‐Rol1/2‐PU, the overall results confirmed that curing temperature had a remarkable effect on the performance characteristics of coatings/films.Keywords
Funding Information
- Ministry of Human Resource Development (Ref. SR/WOSA/CS97/2016)
- King Saud University
- University Grants Commission of Bangladesh
This publication has 31 references indexed in Scilit:
- Epoxy resin from cardanol as partial replacement of bisphenol-A-based epoxy for coating applicationJournal of Coatings Technology and Research, 2014
- Polyurethane coatings prepared from CNSL based polyols: Synthesis, characterization and propertiesProgress in Organic Coatings, 2014
- Polyurethane-based drug delivery systemsInternational Journal of Pharmaceutics, 2013
- Polyurethane nanocomposites prepared from solvent-free stable dispersions of functionalized graphene nanosheets in polyolsPolymer, 2012
- New petroleum absorbers based on cardanol‐furfuraldehyde magnetic nanocompositesPolymer Engineering & Science, 2012
- Studies on the synthesis and curing of epoxidized novolac vinyl ester resin from renewable resource materialEuropean Polymer Journal, 2010
- Physical, mechanical, and thermal properties of polyurethanes based on hydroxyalkylated cardanol–formaldehyde resinsJournal of Applied Polymer Science, 2005
- Synthesis, Structure, and Properties of Novel Polyols from Cardanol and Developed PolyurethanesIndustrial & Engineering Chemistry Research, 2005
- Biodegradation of polyurethane: a reviewInternational Biodeterioration & Biodegradation, 2002
- Preparation and Properties of Water-borne PolyurethanesPolymer International, 1997