One-time frequency sweep to eliminate IQ coupling in MEMS vibratory gyroscopes
Authors:
- 1 July 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 273-277
Abstract
This paper explores the influence of the phase delay resulting from the signal processing circuitry on the IQ coupling characteristics in MEMS vibratory gyroscopes. In the conventional method, the phase delay appears as a phase error in the phase-locked loop (PLL) of the drive-mode oscillation control. A detailed theoretical analysis derives an analytical equation of the IQ coupling about the phase error. Then, a one-time frequency sweep (OTFS) procedure, which acts as an in-situation network analyzer, is proposed to compensate for the phase error by automatically modifying the reference value of the PLL control. Further, the OTFS method is tested using a field-programmable gate array (FPGA) based digital platform on a vibratory micro-machined gyroscope. Experimental results demonstrate that the OTFS method effectively eliminates the unwanted IQ coupling, and the tested gyroscope exhibits a bias instability of 0.75 °hr and an angle random walk (ARW) of 0.06 °/hr at atmosphere.Keywords
This publication has 9 references indexed in Scilit:
- An Automatically Mode-Matched MEMS Gyroscope With Wide and Tunable BandwidthJournal of Microelectromechanical Systems, 2014
- Utilization of mechanical quadrature in silicon MEMS vibratory gyroscope to increase and expand the long term in-run bias stability2014
- Quadrature-Error Compensation and Corresponding Effects on the Performance of Fully Decoupled MEMS GyroscopesJournal of Microelectromechanical Systems, 2012
- Open loop compensation of the quadrature error in MEMS vibrating gyroscopes2009
- 50 Years of CORDIC: Algorithms, Architectures, and ApplicationsIEEE Transactions on Circuits and Systems I: Regular Papers, 2009
- A 0.1°/HR bias drift electronically matched tuning fork microgyroscope2008
- Zero-Rate Output and Quadrature Compensation in Vibratory MEMS GyroscopesIEEE Sensors Journal, 2007
- Single-chip surface micromachined integrated gyroscope with 50°/h Allan deviationIEEE Journal of Solid-State Circuits, 2002
- Micromachined inertial sensorsProceedings of the IEEE, 1998