Energy, exergy, and emissions analysis of a SI engine fuelled with partial addition of di-isobutylene and furfuryl amine in super-premium gasoline
- 2 June 2026
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Abstract
The growing transportation sector has led to harmful emissions from the combustion of fossil fuels. Similarly, the investigation of new alternatives to conventional fuels to meet current energy demands has significantly increased in recent decades. The present research investigates the energy, exergy, and emissions characteristics of a spark engine (SI engine) fuelled with partial addition of di-isobutylene (DI) and furfuryl amine (FA) (10%, 20%, and 30% by volume) in commercial super-premium gasoline (SPG) at 1500 rpm, 2500 rpm, and 3500 rpm speeds. This investigation focuses on comparing the engine characteristics of tested blends with SPG. Experimental results from an energy, exergy, and emissions analysis of SPG and tested blends showed that the maximum brake thermal efficiency (BTE) and exergy efficiency occur at 2500 rpm. Carbon monoxide (CO) and unburned hydrocarbon (HC) emissions were lowest, and carbon dioxide (CO 2 ) emissions were higher at this engine speed for the FAG30 blend. For tested blends and fuels, CO2 emissions at 1500 rpm and 3500 rpm are lower than at 2500 rpm. Compared to other blends, it was experimentally found that NOx emissions were lowest with SPG. Experimental findings show that BTE was 31.77%, 32.77%, and 26.44% for SPG, DIG30, and FAG30 blends. The FAG30 blend shows BTE and exergy efficiencies of 26.44% and 20.56%, respectively, at 2500 rpm. These results can help determine optimal engine operating conditions for biofuel-SPG blends and reduce dependence on SPG.Keywords
This publication has 47 references indexed in Scilit:
- Application of Higher-Order Alcohols (1-Hexanol-C6 and 1-Heptanol-C7) in a Spark-Ignition Engine: Analysis and AssessmentArabian Journal for Science and Engineering, 2021
- Furfural Derivatives as Fuel ComponentsChemistry and Technology of Fuels and Oils, 2020
- Experimental analysis of NOx reduction through water addition and comparison with exhaust gas recyclingEnergy, 2019
- The production of furfural directly from hemicellulose in lignocellulosic biomass: A reviewCatalysis Today, 2019
- Recent applications of gas chromatography with high‐resolution mass spectrometryJournal of Separation Science, 2017
- Environmental, enviroeconomic and enhanced thermodynamic analyses of a diesel engine with diesel oxidation catalyst (DOC) and diesel particulate filter (DPF) after treatment systemsEnergy, 2017
- Modelling and optimization of combined cycle power plant based on exergoeconomic and environmental analysesApplied Thermal Engineering, 2014
- Performance assessment of an internal combustion engine at varying dead (reference) state temperaturesApplied Thermal Engineering, 2009
- On the emissions from internal-combustion engines:a reviewInternational Journal of Energy Research, 1998
- The exergy method of thermal plant analysisJournal of Materials Processing Technology, 1988