Vishal V. Patil
Research Subjects
Vishal V. Patil has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Ranjit S. Patil
Birla Institute of Technology & Science, Pilani, K K Birla Goa Campus
7 shared publications - Sudarshan Kumar
Indian Institute of Technology Bombay
5 shared publications Paramvir Singh
3 shared publications- Paramvir Singh
National Institute of Technology Agartala
3 shared publications - Avesahemad S. N. Husainy
Sharad Institute of Technology College of Engineering
2 shared publications - Neeraj Kumbhakarna
Indian Institute of Technology Bombay
2 shared publications
Latest Publications
- 2 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Energy, exergy, and emissions analysis of a SI engine fuelled with partial addition of di-isobutylene and furfuryl amine in super-premium gasoline
The growing transportation sector has led to harmful emissions from the combustion of fossil fuels. Similarly, the investigation of new alternatives to conventional fuels to meet current energy demands has significantly increased in recent decades. The present research investigates the energy, exergy, and emissions characteristics of a spark engine (SI engine) fuelled with partial addition of di-isobutylene (DI) and furfuryl amine (FA) (10%, 20%, and 30% by volume) in commercial super-premium gasoline (SPG) at 1500 rpm, 2500 rpm, and 3500 rpm speeds. This investigation focuses on comparing the engine characteristics of tested blends with SPG. Experimental results from an energy, exergy, and emissions analysis of SPG and tested blends showed that the maximum brake thermal efficiency (BTE) and exergy efficiency occur at 2500 rpm. Carbon monoxide (CO) and unburned hydrocarbon (HC) emissions were lowest, and carbon dioxide (CO 2 ) emissions were higher at this engine speed for the FAG30 blend. For tested blends and fuels, CO2 emissions at 1500 rpm and 3500 rpm are lower than at 2500 rpm. Compared to other blends, it was experimentally found that NOx emissions were lowest with SPG. Experimental findings show that BTE was 31.77%, 32.77%, and 26.44% for SPG, DIG30, and FAG30 blends. The FAG30 blend shows BTE and exergy efficiencies of 26.44% and 20.56%, respectively, at 2500 rpm. These results can help determine optimal engine operating conditions for biofuel-SPG blends and reduce dependence on SPG.
- 2 June 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Energy, exergy, and emissions analysis of a SI engine fuelled with partial addition of di-isobutylene and furfuryl amine in super-premium gasoline
The growing transportation sector has led to harmful emissions from the combustion of fossil fuels. Similarly, the investigation of new alternatives to conventional fuels to meet current energy demands has significantly increased in recent decades. The present research investigates the energy, exergy, and emissions characteristics of a spark engine (SI engine) fuelled with partial addition of di-isobutylene (DI) and furfuryl amine (FA) (10%, 20%, and 30% by volume) in commercial super-premium gasoline (SPG) at 1500 rpm, 2500 rpm, and 3500 rpm speeds. This investigation focuses on comparing the engine characteristics of tested blends with SPG. Experimental results from an energy, exergy, and emissions analysis of SPG and tested blends showed that the maximum brake thermal efficiency (BTE) and exergy efficiency occur at 2500 rpm. Carbon monoxide (CO) and unburned hydrocarbon (HC) emissions were lowest, and carbon dioxide (CO 2 ) emissions were higher at this engine speed for the FAG30 blend. For tested blends and fuels, CO2 emissions at 1500 rpm and 3500 rpm are lower than at 2500 rpm. Compared to other blends, it was experimentally found that NOx emissions were lowest with SPG. Experimental findings show that BTE was 31.77%, 32.77%, and 26.44% for SPG, DIG30, and FAG30 blends. The FAG30 blend shows BTE and exergy efficiencies of 26.44% and 20.56%, respectively, at 2500 rpm. These results can help determine optimal engine operating conditions for biofuel-SPG blends and reduce dependence on SPG.
- 27 November 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 198
Thermodynamic and sustainability analysis of sanitary waste derived syngas-hydrogen blends with diesel in a RCCI engine
- 27 November 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 198
Thermodynamic and sustainability analysis of sanitary waste derived syngas-hydrogen blends with diesel in a RCCI engine
- 17 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 137, 689-709
Energy-exergy and exergoeconomic analysis of a hydrogen-enriched spark-ignition engine fueled with premium gasoline-ethanol blends
- 17 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 137, 689-709
Energy-exergy and exergoeconomic analysis of a hydrogen-enriched spark-ignition engine fueled with premium gasoline-ethanol blends
- 26 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (6) , 2202-2216
Energy and exergy analysis of a SI engine fueled with anisole and isobutyl acetate with super-premium gasoline
The rising demand for fossil fuels is rapidly depleting the limited sources of crude oil, leading to harmful emissions upon combustion. Consequently, developing sustainable and environment-friendly alternatives to fossil fuels has become imperative to reduce dependence on them and decrease harmful emissions. In this study, the performance of different blends prepared by mixing biofuels with super-premium gasoline (SPG) in a spark-ignition (SI) engine at different speeds is investigated through energy and exergy analysis. Three biofuels, namely ethanol, anisole, and isobutyl acetate, are considered, and these biofuels are blended with the base SPG in volumes ranging from 10% to 30%. Letters G, E, A, and IBA are used to denote SPG, ethanol, anisole, and isobutyl acetate, respectively. Experiments were conducted on a three-cylinder, four-stroke SI engine with varying speeds. The results of different anisole-SPG and isobutyl acetate-SPG blends are compared with SPG and ethanol-SPG blends. The results of the energy and exergy analysis reveal that the maximum brake thermal efficiency (BTE) and exergy efficiency are achieved when the engine runs at 2500 rpm for SPG and different blends. Furthermore, the engine emissions of carbon monoxide (CO) are found to be lowest at this engine speed. It is also investigated that the maximum BTE and exergy efficiency are obtained for AG10 and IBAG10 blends. The maximum BTE of AG10 and IBAG10 are 31.23% and 30.82%, respectively, while the maximum exergy efficiency of AG10 and IBAG10 are 24.37% and 23.82%. At 2500 rpm, the blends AG10 and IBAG10 showed a slight reduction in BTE by 1.72% and 3.02%, respectively, compared to SPG. At the same time, the exergy efficiency of the AG10 and IBAG10 blends is reduced by 1.5% and 3.72%, respectively. On the other hand, the IBAG30 blend showed 7% lower emissions of CO and NOx compared to SPG. Among all the blends, EG30 showed the lowest reduction of HC emissions by 14% compared to SPG. Additionally, the sustainability index values decreased by 0.47% and 1.19% for AG10 and IBAG10, respectively, compared to SPG at 2500 rpm.
- 26 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (6) , 2202-2216
Energy and exergy analysis of a SI engine fueled with anisole and isobutyl acetate with super-premium gasoline
The rising demand for fossil fuels is rapidly depleting the limited sources of crude oil, leading to harmful emissions upon combustion. Consequently, developing sustainable and environment-friendly alternatives to fossil fuels has become imperative to reduce dependence on them and decrease harmful emissions. In this study, the performance of different blends prepared by mixing biofuels with super-premium gasoline (SPG) in a spark-ignition (SI) engine at different speeds is investigated through energy and exergy analysis. Three biofuels, namely ethanol, anisole, and isobutyl acetate, are considered, and these biofuels are blended with the base SPG in volumes ranging from 10% to 30%. Letters G, E, A, and IBA are used to denote SPG, ethanol, anisole, and isobutyl acetate, respectively. Experiments were conducted on a three-cylinder, four-stroke SI engine with varying speeds. The results of different anisole-SPG and isobutyl acetate-SPG blends are compared with SPG and ethanol-SPG blends. The results of the energy and exergy analysis reveal that the maximum brake thermal efficiency (BTE) and exergy efficiency are achieved when the engine runs at 2500 rpm for SPG and different blends. Furthermore, the engine emissions of carbon monoxide (CO) are found to be lowest at this engine speed. It is also investigated that the maximum BTE and exergy efficiency are obtained for AG10 and IBAG10 blends. The maximum BTE of AG10 and IBAG10 are 31.23% and 30.82%, respectively, while the maximum exergy efficiency of AG10 and IBAG10 are 24.37% and 23.82%. At 2500 rpm, the blends AG10 and IBAG10 showed a slight reduction in BTE by 1.72% and 3.02%, respectively, compared to SPG. At the same time, the exergy efficiency of the AG10 and IBAG10 blends is reduced by 1.5% and 3.72%, respectively. On the other hand, the IBAG30 blend showed 7% lower emissions of CO and NOx compared to SPG. Among all the blends, EG30 showed the lowest reduction of HC emissions by 14% compared to SPG. Additionally, the sustainability index values decreased by 0.47% and 1.19% for AG10 and IBAG10, respectively, compared to SPG at 2500 rpm.
- 11 January 2023
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 145 (5) , 1-34
Validation of Gasoline Surrogates Through Thermodynamic Analysis of Spark-Ignition Engine
The investigation aims to evaluate the impacts of commercial gasoline and gasoline surrogates on energy and exergy efficiencies in a spark-ignition (SI) engine. In this investigation, a new approach for formulating next-generation gasoline surrogates is investigated through testing these surrogates in a multi-cylinder SI engine. Energy and exergy analyses were carried out using the primary reference fuel-methylcyclohexane (PRF-MCH) blend (82.88% iso-octane + 9.16% n-heptane + 7.96% methylcyclohexane), primary reference fuel with 1,2,4-trimethylbenzene (PRF-1,2,4-TMB) blends (76% iso-octane + 9% n-heptane + 15% 1,2,4-trimethylbenzene and 61% iso-octane + 9% n-heptane + 30% 1,2,4-trimethylbenzene), and commercially available gasoline (gasoline) in an SI engine. The engine investigation results show that the PRF-MCH blend is a promising surrogate to reproduce the gasoline fuel engine characteristics such as combustion and emission characteristics of gasoline fuel. The detailed experiments were executed at the SI-engine speed conditions of 1500 rpm and 2500 rpm. It is found that PRF-MCH blend energy-exergy efficiencies are comparable to commercially available gasoline. It can also be concluded that engine testing in terms of energy-exergy analyses for proposed gasoline surrogates provides a qualitative and quantitative understanding of combustion behavior, emission characteristics, assessment of the effectiveness, and useful work potential gasoline surrogates.
- 11 January 2023
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 145 (5) , 1-34
Validation of Gasoline Surrogates Through Thermodynamic Analysis of Spark-Ignition Engine
The investigation aims to evaluate the impacts of commercial gasoline and gasoline surrogates on energy and exergy efficiencies in a spark-ignition (SI) engine. In this investigation, a new approach for formulating next-generation gasoline surrogates is investigated through testing these surrogates in a multi-cylinder SI engine. Energy and exergy analyses were carried out using the primary reference fuel-methylcyclohexane (PRF-MCH) blend (82.88% iso-octane + 9.16% n-heptane + 7.96% methylcyclohexane), primary reference fuel with 1,2,4-trimethylbenzene (PRF-1,2,4-TMB) blends (76% iso-octane + 9% n-heptane + 15% 1,2,4-trimethylbenzene and 61% iso-octane + 9% n-heptane + 30% 1,2,4-trimethylbenzene), and commercially available gasoline (gasoline) in an SI engine. The engine investigation results show that the PRF-MCH blend is a promising surrogate to reproduce the gasoline fuel engine characteristics such as combustion and emission characteristics of gasoline fuel. The detailed experiments were executed at the SI-engine speed conditions of 1500 rpm and 2500 rpm. It is found that PRF-MCH blend energy-exergy efficiencies are comparable to commercially available gasoline. It can also be concluded that engine testing in terms of energy-exergy analyses for proposed gasoline surrogates provides a qualitative and quantitative understanding of combustion behavior, emission characteristics, assessment of the effectiveness, and useful work potential gasoline surrogates.