Solidly Mounted Anti-Symmetric Lamb-Wave Delay Lines as an Alternate to SAW Devices
- 16 October 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 39 (12) , 1916-1919
Abstract
This letter reports the first results on a new generation of anti-symmetric lamb wave devices using a simple solidly mounted platform of AlN/Mo/Si and operating at very high to super high frequency (VHF-SHF) range. AlN/Mo/Si based solidly mounted resonators (SMRs) with sub-micron interdigitated transducers (IDTs) were fabricated using electron beam (ebeam) lithography and liftoff process. Plasma etching was used to etch vias in ground pads to get access to the bottom electrode for grounding. By comparing the floating, grounded and no bottom electrode device performances, it has been observed that the presented SMR design with grounded bottom electrode result in enhancement of the coupling efficiency by 500% as compared to conventional SAW devices. Additionally, these devices are more mechanically robust and can be monolithically integrated with a CMOS platform without requiring complex packaging processes as compared to conventional released lamb wave resonators.Keywords
Funding Information
- ARO and ONR Young Investigator Award
This publication has 26 references indexed in Scilit:
- AlN/3C–SiC Composite Plate Enabling High‐Frequency and High‐Q Micromechanical ResonatorsAdvanced Materials, 2012
- Microfluidics based on ZnO/nanocrystalline diamond surface acoustic wave devicesBiomicrofluidics, 2012
- High-frequency surface acoustic wave devices based on AlN/diamond layered structure realized using e-beam lithographyJournal of Applied Physics, 2007
- 5 GHz surface acoustic wave devices based on aluminum nitride/diamond layered structure realized using electron beam lithographyApplied Physics Letters, 2006
- Modulation of photonic structures by surface acoustic wavesReports on Progress in Physics, 2005
- Effects of bottom electrodes on the orientation of AlN films and the frequency responses of resonators in AlN-based FBARsThin Solid Films, 2004
- Superhigh-frequency surface-acoustic-wave transducers using AlN layers grown on SiC substratesApplied Physics Letters, 2002
- Morphological properties of AlN piezoelectric thin films deposited by DC reactive magnetron sputteringThin Solid Films, 2001
- Morphology and orientation of nanocrystalline AlN thin filmsThin Solid Films, 1994
- GaN, AlN, and InN: A reviewJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1992