Mina Rais-Zadeh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mina Rais-Zadeh has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Debbie G. Senesky
Department of Aeronautics and Astronautics, Stanford University 5 , Stanford, California 94305
3 shared publications - Savannah R. Eisner
Department of Electrical Engineering, Columbia University 4 , New York, New York 10027
3 shared publications - Afzaal Qamar
Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, MI 48109 USA
2 shared publications - Azadeh Ansari
Department of Electrical Engineering and Computer Science University of Michigan 1301 Beal Avenue, Ann Arbor MI 48109 USA
2 shared publications - Jared Naphy
Department of Aeronautics and Astronautics, Stanford University, Stanford, CA, USA
2 shared publications - Philip X. -L. Feng
University of Florida
2 shared publications
Latest Publications
- 10 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (3) , 381-398
Synchronization Dynamics of MEMS Oscillators With Sub-Harmonic Injection Locking (SHIL) for Emulating Artificial Ising Spins
This paper reports on synchronization dynamics in coupled self-sustaining oscillators referenced to bulk acoustic wave (BAW) resonant microelectromechanical systems (MEMS), for emulating artificial Ising spins. Bistable phase states are created by applying a sub-harmonic injection locking (SHIL) signal to a piezoelectric aluminum nitride-on-silicon (AlN-on-Si or AlN/Si) length-extensional (LE) mode MEMS feedback oscillator, which is the first realization of emulating spin up and down states of the Ising model using BAW MEMS self-sustaining oscillators. The oscillator performance specifications, including phase noise and frequency stability (Allan deviation), are characterized prior to initiation of coupling and synchronization. The probabilities of obtaining bistable phase states are then determined as a function of SHIL amplitude. Detailed theoretical and experimental analyses of the stable operation of AlN/Si MEMS oscillators in the nonlinear regime and the dynamics of a single BAW MEMS oscillator synchronized to SHIL are presented. The initial experimental realization of two coupled MEMS oscillators allows for careful calibration of the parameters governing synchronization dynamics, including amplitude-frequency dependency via the resonance backbone curve, frequency detuning, and coupling between oscillators. The measured results show that the synchronization bandwidth can be varied by increasing the SHIL amplitude at a fixed coupling strength, which provides flexibility in synchronizing multiple oscillators for building MEMS oscillator Ising machines. Finally, the probability of obtaining an out-of-phase state (for reactive coupling) and an in-phase state (for dissipative coupling) is studied as a function of the coupling coefficient, thus enabling its optimal value to be found. [2024-0161]
- 10 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (3) , 381-398
Synchronization Dynamics of MEMS Oscillators With Sub-Harmonic Injection Locking (SHIL) for Emulating Artificial Ising Spins
This paper reports on synchronization dynamics in coupled self-sustaining oscillators referenced to bulk acoustic wave (BAW) resonant microelectromechanical systems (MEMS), for emulating artificial Ising spins. Bistable phase states are created by applying a sub-harmonic injection locking (SHIL) signal to a piezoelectric aluminum nitride-on-silicon (AlN-on-Si or AlN/Si) length-extensional (LE) mode MEMS feedback oscillator, which is the first realization of emulating spin up and down states of the Ising model using BAW MEMS self-sustaining oscillators. The oscillator performance specifications, including phase noise and frequency stability (Allan deviation), are characterized prior to initiation of coupling and synchronization. The probabilities of obtaining bistable phase states are then determined as a function of SHIL amplitude. Detailed theoretical and experimental analyses of the stable operation of AlN/Si MEMS oscillators in the nonlinear regime and the dynamics of a single BAW MEMS oscillator synchronized to SHIL are presented. The initial experimental realization of two coupled MEMS oscillators allows for careful calibration of the parameters governing synchronization dynamics, including amplitude-frequency dependency via the resonance backbone curve, frequency detuning, and coupling between oscillators. The measured results show that the synchronization bandwidth can be varied by increasing the SHIL amplitude at a fixed coupling strength, which provides flexibility in synchronizing multiple oscillators for building MEMS oscillator Ising machines. Finally, the probability of obtaining an out-of-phase state (for reactive coupling) and an in-phase state (for dissipative coupling) is studied as a function of the coupling coefficient, thus enabling its optimal value to be found. [2024-0161]
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6610-6617
Degradation Analysis of InAlN/GaN Transistors Under Simulated Venus Surface Conditions
The Venusian surface presents extreme thermal, chemical, and pressure challenges for long-term lander electronics. Gallium nitride (GaN) heterostructure devices exhibit chemical robustness and thermal stability, enabling harsh environment operation. This study examines the degradation mechanisms of depletion-mode InAlN/GaN-on-Si high-electron-mobility transistors (HEMTs) featuring a refractory iridium oxide (IrOx) gate in Venus surface conditions. Over an 11-day operational period at 460 °C and 93 bar, device characteristics were monitored in situ, revealing a 94% decreased drain current from 62.46 to 3.71 mA/mm, an increased on-resistance from 137.87 to 1266.50 $\Omega {\cdot }$ mm, decreased on/off current ratio from ${2}.{88} \times {10}^{{3}}$ to ${9}.{88} \times {10}^{{2}}$ and + 2.37-V threshold voltage shift. Post-exposure electric measurements showed that both unbiased and biased HEMT characteristics were not recoverable at room temperature. Materials characterization, including scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX), identified surface roughening and clustering of the IrOx gate region, attributed to dewetting and interdiffusion effects after exposure. Despite these changes, the transistors remained functional, and Hall measurements confirmed an intact 2-D electron gas (2DEG). An unbiased control device exposed to the same environment exhibited improved transconductance and a negative threshold voltage shift, but worse on/off from increased OFF-state current at room temperature. This investigation demonstrates the potential of InAlN/GaN HEMTs for signal conditioning electronics on-board future Venus missions, while highlighting the need for improved gate and passivation layers and emphasizing the need for in situ bias testing under harsh conditions.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (12) , 6610-6617
Degradation Analysis of InAlN/GaN Transistors Under Simulated Venus Surface Conditions
The Venusian surface presents extreme thermal, chemical, and pressure challenges for long-term lander electronics. Gallium nitride (GaN) heterostructure devices exhibit chemical robustness and thermal stability, enabling harsh environment operation. This study examines the degradation mechanisms of depletion-mode InAlN/GaN-on-Si high-electron-mobility transistors (HEMTs) featuring a refractory iridium oxide (IrOx) gate in Venus surface conditions. Over an 11-day operational period at 460 °C and 93 bar, device characteristics were monitored in situ, revealing a 94% decreased drain current from 62.46 to 3.71 mA/mm, an increased on-resistance from 137.87 to 1266.50 $\Omega {\cdot }$ mm, decreased on/off current ratio from ${2}.{88} \times {10}^{{3}}$ to ${9}.{88} \times {10}^{{2}}$ and + 2.37-V threshold voltage shift. Post-exposure electric measurements showed that both unbiased and biased HEMT characteristics were not recoverable at room temperature. Materials characterization, including scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX), identified surface roughening and clustering of the IrOx gate region, attributed to dewetting and interdiffusion effects after exposure. Despite these changes, the transistors remained functional, and Hall measurements confirmed an intact 2-D electron gas (2DEG). An unbiased control device exposed to the same environment exhibited improved transconductance and a negative threshold voltage shift, but worse on/off from increased OFF-state current at room temperature. This investigation demonstrates the potential of InAlN/GaN HEMTs for signal conditioning electronics on-board future Venus missions, while highlighting the need for improved gate and passivation layers and emphasizing the need for in situ bias testing under harsh conditions.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (4) , 1674-1681
Investigation of InAlN/GaN Circular Transistors for Venus and Other High-Temperature Applications
This study examines the performance and long-term reliability of depletion-mode In0.18Al0.82/GaN-on-Si circular high electron mobility transistors (C-HEMTs) in high-temperature environments. Transistors were operated at 472 ∘C in air and 465 ∘C under simulated Venus conditions (supercritical CO2, 1348 psi) over 5 days. During heating, a reduction in maximum drain current (ID,max) and a positive threshold voltage (VTH) shift are observed in both air and Venus surface conditions. The ON/OFF current ratio (Ion/Ioff) and OFF-state gate leakage current (IG,off) exhibit unique trends during heating depending on the ambient, yet values upon reaching nominal 468 ∘C are similar. During the 5-day operation at high-temperature in air, the Mo/Au gate contact demonstrated robust performance with 9% ID,max reduction and 3% VTH shift. Ion/Ioff improved by 8%, and IG,off decreased by 38%. In comparison, device degradation was more significant in supercritical CO2, where the increased permeability affected the OFF-state current. The C-HEMT operated in situ Venus surface conditions exhibited 11% reduction in ID,max, 7% VTH shift, 30% reduction in Ion/Ioff, and 23% reduction in IG,off. Correlation between electrical performance shifts and surface morphology changes, as observed through scanning electron microscopy (SEM) and atomic force microscopy (AFM), provides deeper insights into degradation mechanisms. Despite this, the transistors showed remarkable resilience, and their wide range of available bias points ensures versatile operation for circuit-level implementations in extreme conditions. These findings underscore the suitability of InAlN/GaN HEMTs for uncooled, high-temperature applications without hermetic sealing.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (4) , 1674-1681
Investigation of InAlN/GaN Circular Transistors for Venus and Other High-Temperature Applications
This study examines the performance and long-term reliability of depletion-mode In0.18Al0.82/GaN-on-Si circular high electron mobility transistors (C-HEMTs) in high-temperature environments. Transistors were operated at 472 ∘C in air and 465 ∘C under simulated Venus conditions (supercritical CO2, 1348 psi) over 5 days. During heating, a reduction in maximum drain current (ID,max) and a positive threshold voltage (VTH) shift are observed in both air and Venus surface conditions. The ON/OFF current ratio (Ion/Ioff) and OFF-state gate leakage current (IG,off) exhibit unique trends during heating depending on the ambient, yet values upon reaching nominal 468 ∘C are similar. During the 5-day operation at high-temperature in air, the Mo/Au gate contact demonstrated robust performance with 9% ID,max reduction and 3% VTH shift. Ion/Ioff improved by 8%, and IG,off decreased by 38%. In comparison, device degradation was more significant in supercritical CO2, where the increased permeability affected the OFF-state current. The C-HEMT operated in situ Venus surface conditions exhibited 11% reduction in ID,max, 7% VTH shift, 30% reduction in Ion/Ioff, and 23% reduction in IG,off. Correlation between electrical performance shifts and surface morphology changes, as observed through scanning electron microscopy (SEM) and atomic force microscopy (AFM), provides deeper insights into degradation mechanisms. Despite this, the transistors showed remarkable resilience, and their wide range of available bias points ensures versatile operation for circuit-level implementations in extreme conditions. These findings underscore the suitability of InAlN/GaN HEMTs for uncooled, high-temperature applications without hermetic sealing.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (32) , 1585
(Invited) Advances in Wide Bandgap Thermal Resonant Infrared Detectors
Exploring the surface of distant planets, notably Venus, requires robust technologies capable of withstanding extreme environmental conditions while providing valuable scientific insights. This paper delves into the advancements made in designing an instrument tailored for capturing infrared (IR) images in the harsh Venusian environment, where temperatures soar to 500°C. The presented IR detector harnesses the power of a sparse array of resonant-based micromechanical devices, strategically addressing the limitations of existing technologies that can only withstand extreme conditions for limited durations. At the core of this technology lies the utilization of high-temperature-tolerant InAlN/GaN as the primary resonating element. GaN's resilience and high temperature tolerance make it a crucial player in challenging space environments. Its wide bandgap and chemical stability are advantageous for enduring harsh conditions during space missions. In tandem with GaN's intrinsic properties, high-temperature-tolerant meta-absorbers strategically positioned on the surface of each pixel play a pivotal role in the functionality of the IR detector. These meta-absorbers exhibit a remarkable capacity to absorb incoming infrared (IR) radiation, promptly transforming it into heat. The resonant frequency of these devices exhibits a linear shift with temperature variations, and a high-temperature-tolerant read-out electronic adeptly senses this frequency shift, enabling the seamless transfer of imaging data. Extraction of IR source power occurs through the resonance frequency shift in the exposed GaN resonator, compared to a reference resonator. The reference resonator, lacking the IR-absorbing layer, establishes a baseline for minimal resonant shifts. The sparse array configuration strategically reduces imaging elements to optimize power consumption and cost-effectiveness. Inspired by techniques employed in medical imaging instruments, this approach allows the construction of images from a low-power 2D array, striking a balance between imaging capabilities and processing efficiency. This sparse array configuration serves a dual purpose, streamlining signal routing for integrated read-out electronics and simplifying the overall integration and packaging of the IR imaging instrument. Monolithic integration of the read-out electronic with the sensor platform on the same chip overcomes challenges related to electrical and mechanical stability at high temperatures. The resonant effect delivers a remarkable enhancement in the signal-to-noise ratio, surpassing existing thermal detector technologies by a factor of 70×. Furthermore, the strategic implementation of sparse arraying results in approximately a 4× reduction in power consumption, presenting an efficient and resilient solution for imaging in extreme environments. Diverging from traditional IR detectors limited in performance at high temperatures, these detectors rely on the temperature coefficient of elasticity (TCE), offering a wide dynamic range of operational temperatures. Finally, this paper includes recent results measured at 500°C, demonstrating the instrument's capability to operate effectively in Venus's challenging conditions. These advancements pave the way for future planetary exploration missions, promising a deeper understanding of Venus's geological and atmospheric processes.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (32) , 1585
(Invited) Advances in Wide Bandgap Thermal Resonant Infrared Detectors
Exploring the surface of distant planets, notably Venus, requires robust technologies capable of withstanding extreme environmental conditions while providing valuable scientific insights. This paper delves into the advancements made in designing an instrument tailored for capturing infrared (IR) images in the harsh Venusian environment, where temperatures soar to 500°C. The presented IR detector harnesses the power of a sparse array of resonant-based micromechanical devices, strategically addressing the limitations of existing technologies that can only withstand extreme conditions for limited durations. At the core of this technology lies the utilization of high-temperature-tolerant InAlN/GaN as the primary resonating element. GaN's resilience and high temperature tolerance make it a crucial player in challenging space environments. Its wide bandgap and chemical stability are advantageous for enduring harsh conditions during space missions. In tandem with GaN's intrinsic properties, high-temperature-tolerant meta-absorbers strategically positioned on the surface of each pixel play a pivotal role in the functionality of the IR detector. These meta-absorbers exhibit a remarkable capacity to absorb incoming infrared (IR) radiation, promptly transforming it into heat. The resonant frequency of these devices exhibits a linear shift with temperature variations, and a high-temperature-tolerant read-out electronic adeptly senses this frequency shift, enabling the seamless transfer of imaging data. Extraction of IR source power occurs through the resonance frequency shift in the exposed GaN resonator, compared to a reference resonator. The reference resonator, lacking the IR-absorbing layer, establishes a baseline for minimal resonant shifts. The sparse array configuration strategically reduces imaging elements to optimize power consumption and cost-effectiveness. Inspired by techniques employed in medical imaging instruments, this approach allows the construction of images from a low-power 2D array, striking a balance between imaging capabilities and processing efficiency. This sparse array configuration serves a dual purpose, streamlining signal routing for integrated read-out electronics and simplifying the overall integration and packaging of the IR imaging instrument. Monolithic integration of the read-out electronic with the sensor platform on the same chip overcomes challenges related to electrical and mechanical stability at high temperatures. The resonant effect delivers a remarkable enhancement in the signal-to-noise ratio, surpassing existing thermal detector technologies by a factor of 70×. Furthermore, the strategic implementation of sparse arraying results in approximately a 4× reduction in power consumption, presenting an efficient and resilient solution for imaging in extreme environments. Diverging from traditional IR detectors limited in performance at high temperatures, these detectors rely on the temperature coefficient of elasticity (TCE), offering a wide dynamic range of operational temperatures. Finally, this paper includes recent results measured at 500°C, demonstrating the instrument's capability to operate effectively in Venus's challenging conditions. These advancements pave the way for future planetary exploration missions, promising a deeper understanding of Venus's geological and atmospheric processes.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 33 (5) , 532-542
500-750 GHz Contactless Rotating MEMS Single-Pole Double-Throw Waveguide Switch
This paper presents a Single-Pole Double-Throw MEMS waveguide switch operating at $500-750~GHz$ . The switch consist of a U-bend waveguide surrounded by an electromagnetic bandgap (EBG) surface. The EBG surface is used to isolate the electromagnetic wave without mechanical or electrical contact. The U-bend is placed on a rotating arm, that moves between two positions. The arms movement is controlled by a rotating MEMS motor that can rotate $\pm 4.5^\circ$ at $70~V$ . The switch is fabricated using silicon micromachining and is designed to be in-plane with the connecting waveguides. This allows it to be implemented into a silicon micromachined waveguide network. The waveguide switch has a measured insertion loss less than $2.5~dB$ and an isolation larger than $30~dB$ between $550-750~GHz$ . Since the electromagnetic wave can be routed with the EBG surface instead of needing electrical or mechanical contact, the MEMS waveguide switch can operate without the need for mechanical contact and avoids common MEMS switch issues such as stiction between the switch and its ports. 2024-0059
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 33 (5) , 532-542
500-750 GHz Contactless Rotating MEMS Single-Pole Double-Throw Waveguide Switch
This paper presents a Single-Pole Double-Throw MEMS waveguide switch operating at $500-750~GHz$ . The switch consist of a U-bend waveguide surrounded by an electromagnetic bandgap (EBG) surface. The EBG surface is used to isolate the electromagnetic wave without mechanical or electrical contact. The U-bend is placed on a rotating arm, that moves between two positions. The arms movement is controlled by a rotating MEMS motor that can rotate $\pm 4.5^\circ$ at $70~V$ . The switch is fabricated using silicon micromachining and is designed to be in-plane with the connecting waveguides. This allows it to be implemented into a silicon micromachined waveguide network. The waveguide switch has a measured insertion loss less than $2.5~dB$ and an isolation larger than $30~dB$ between $550-750~GHz$ . Since the electromagnetic wave can be routed with the EBG surface instead of needing electrical or mechanical contact, the MEMS waveguide switch can operate without the need for mechanical contact and avoids common MEMS switch issues such as stiction between the switch and its ports. 2024-0059
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 70 (10) , 1213-1228
Five Low-Noise Stable Oscillators Referenced to the Same Multimode AlN/Si MEMS Resonator
We report on the first experimental demonstration of five self-sustaining feedback oscillators referenced to a single multimode resonator, using piezoelectric aluminum nitride on silicon (AlN/Si) microelectromechanical systems (MEMS) technology. Integrated piezoelectric transduction enables efficient readout of five resonance modes of the same AlN/Si MEMS resonator, at 10MHz, 30MHz, 65MHz, 95MHz, and 233MHz with quality ( Q ) factors of 18600, 4350, 4230, 2630, and 2138, respectively. Five stable self-sustaining oscillators are built, each referenced to one of these high- Q modes, and their mode-dependent phase noise and frequency stability (Allan deviation) are measured and analyzed. The 10, 30, 65, 95 and 233MHz oscillators exhibit low phase noise of -116, -100, -105, -106 and -92dBc/Hz at 1kHz offset frequency, respectively. The 65MHz oscillator yields Allan deviation of 4×10 -9 and 2×10 -7 at 1s and 1000s averaging time, respectively. The 10MHz oscillator’s low phase noise holds strong promise for clock and timing applications. The five oscillators’ overall promising performance also suggests suitability for multimode resonant sensing and tracking. This work also elucidates mode dependency in oscillator noise and stability, one of the key attributes of mode-engineerable resonators.
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 70 (10) , 1213-1228
Five Low-Noise Stable Oscillators Referenced to the Same Multimode AlN/Si MEMS Resonator
We report on the first experimental demonstration of five self-sustaining feedback oscillators referenced to a single multimode resonator, using piezoelectric aluminum nitride on silicon (AlN/Si) microelectromechanical systems (MEMS) technology. Integrated piezoelectric transduction enables efficient readout of five resonance modes of the same AlN/Si MEMS resonator, at 10MHz, 30MHz, 65MHz, 95MHz, and 233MHz with quality ( Q ) factors of 18600, 4350, 4230, 2630, and 2138, respectively. Five stable self-sustaining oscillators are built, each referenced to one of these high- Q modes, and their mode-dependent phase noise and frequency stability (Allan deviation) are measured and analyzed. The 10, 30, 65, 95 and 233MHz oscillators exhibit low phase noise of -116, -100, -105, -106 and -92dBc/Hz at 1kHz offset frequency, respectively. The 65MHz oscillator yields Allan deviation of 4×10 -9 and 2×10 -7 at 1s and 1000s averaging time, respectively. The 10MHz oscillator’s low phase noise holds strong promise for clock and timing applications. The five oscillators’ overall promising performance also suggests suitability for multimode resonant sensing and tracking. This work also elucidates mode dependency in oscillator noise and stability, one of the key attributes of mode-engineerable resonators.
- 12 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 29 (5) , 699-705
Frequency Tunable Surface Acoustic Wave Actuators for Adjustable Pitch Diffraction Grating
Diffraction gratings are commonly used in optical instruments such as in spectrometers, monochromators, and wavelength division multiplexing devices. The diffraction efficiency is directly related to the ratio of the grating spacing or pitch to the wavelength of the light. In a sinusoidal grating (or holographic grating) the efficiency is generally lower than a blazed grating with a saw tooth profile, but the spectral coverage can be broader. To address a large spectral range, advanced spectrometers use a number of diffraction gratings with a fixed pitch. In this paper, we show for the first time, the use of a tunable-frequency surface acoustic wave (SAW) delay line as a broad-band sinusoidal diffraction grating. To tune the frequency, we tune the effective spacing of the interdigitated transducers (IDTs) by applying specific phases to each IDT finger. The prototype SAW grating covers frequency range of 86 MHz to 360 MHz corresponding to optical range of 1.3μm to 9μm. [2020-0189]
- 12 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 29 (5) , 699-705
Frequency Tunable Surface Acoustic Wave Actuators for Adjustable Pitch Diffraction Grating
Diffraction gratings are commonly used in optical instruments such as in spectrometers, monochromators, and wavelength division multiplexing devices. The diffraction efficiency is directly related to the ratio of the grating spacing or pitch to the wavelength of the light. In a sinusoidal grating (or holographic grating) the efficiency is generally lower than a blazed grating with a saw tooth profile, but the spectral coverage can be broader. To address a large spectral range, advanced spectrometers use a number of diffraction gratings with a fixed pitch. In this paper, we show for the first time, the use of a tunable-frequency surface acoustic wave (SAW) delay line as a broad-band sinusoidal diffraction grating. To tune the frequency, we tune the effective spacing of the interdigitated transducers (IDTs) by applying specific phases to each IDT finger. The prototype SAW grating covers frequency range of 86 MHz to 360 MHz corresponding to optical range of 1.3μm to 9μm. [2020-0189]
- 8 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 29 (5) , 900-905
Ultra-High-Q Gallium Nitride SAW Resonators for Applications With Extreme Temperature Swings
In this paper, we present ultra-high quality factor (Q) SAW resonators fabricated on aluminum gallium nitride on gallium nitride on silicon (AlGaN/GaN/Si) heterostructures with Q exceeding 6000 at room temperature. We characterize their temperature response in a broad range of temperature (-196°C to 500°C or 77 K to 773 K). The effect of doping on the Q and temperature coefficient of frequency (TCF) of the GaN-based SAW resonators is analyzed, for the first time, using un-intentionally doped GaN (UID-GaN), carbon doped GaN (C-doped), and Si doped GaN. The Q value for UID-GaN and C-doped GaN is similar and decreases from 2000 to 1000 as the temperature is increased from 77 K to 773 K. The Q value of Si-doped GaN is higher than UID and C-doped GaN by a factor of 3 (6622 at 77 K) and decreases with increase of temperature. This value of Q at 1.8 GHz is the highest reported amongst aluminum nitride (AlN) or GaN-based SAW resonators. For extreme high temperatures (≥573 K) the TCF value is half the TCF value of UID and C-doped GaN, which shows the possibility of engineering the TCF by tuning the doping concentration. For low temperatures (≤150 K) C-doped and UID-GaN show a turn over point in TCF curve which shows their promise for cold clocks. [2020-0163]
- 8 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 29 (5) , 900-905
Ultra-High-Q Gallium Nitride SAW Resonators for Applications With Extreme Temperature Swings
In this paper, we present ultra-high quality factor (Q) SAW resonators fabricated on aluminum gallium nitride on gallium nitride on silicon (AlGaN/GaN/Si) heterostructures with Q exceeding 6000 at room temperature. We characterize their temperature response in a broad range of temperature (-196°C to 500°C or 77 K to 773 K). The effect of doping on the Q and temperature coefficient of frequency (TCF) of the GaN-based SAW resonators is analyzed, for the first time, using un-intentionally doped GaN (UID-GaN), carbon doped GaN (C-doped), and Si doped GaN. The Q value for UID-GaN and C-doped GaN is similar and decreases from 2000 to 1000 as the temperature is increased from 77 K to 773 K. The Q value of Si-doped GaN is higher than UID and C-doped GaN by a factor of 3 (6622 at 77 K) and decreases with increase of temperature. This value of Q at 1.8 GHz is the highest reported amongst aluminum nitride (AlN) or GaN-based SAW resonators. For extreme high temperatures (≥573 K) the TCF value is half the TCF value of UID and C-doped GaN, which shows the possibility of engineering the TCF by tuning the doping concentration. For low temperatures (≤150 K) C-doped and UID-GaN show a turn over point in TCF curve which shows their promise for cold clocks. [2020-0163]
- 16 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 39 (12) , 1916-1919
Solidly Mounted Anti-Symmetric Lamb-Wave Delay Lines as an Alternate to SAW Devices
This letter reports the first results on a new generation of anti-symmetric lamb wave devices using a simple solidly mounted platform of AlN/Mo/Si and operating at very high to super high frequency (VHF-SHF) range. AlN/Mo/Si based solidly mounted resonators (SMRs) with sub-micron interdigitated transducers (IDTs) were fabricated using electron beam (ebeam) lithography and liftoff process. Plasma etching was used to etch vias in ground pads to get access to the bottom electrode for grounding. By comparing the floating, grounded and no bottom electrode device performances, it has been observed that the presented SMR design with grounded bottom electrode result in enhancement of the coupling efficiency by 500% as compared to conventional SAW devices. Additionally, these devices are more mechanically robust and can be monolithically integrated with a CMOS platform without requiring complex packaging processes as compared to conventional released lamb wave resonators.
- 16 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 39 (12) , 1916-1919
Solidly Mounted Anti-Symmetric Lamb-Wave Delay Lines as an Alternate to SAW Devices
This letter reports the first results on a new generation of anti-symmetric lamb wave devices using a simple solidly mounted platform of AlN/Mo/Si and operating at very high to super high frequency (VHF-SHF) range. AlN/Mo/Si based solidly mounted resonators (SMRs) with sub-micron interdigitated transducers (IDTs) were fabricated using electron beam (ebeam) lithography and liftoff process. Plasma etching was used to etch vias in ground pads to get access to the bottom electrode for grounding. By comparing the floating, grounded and no bottom electrode device performances, it has been observed that the presented SMR design with grounded bottom electrode result in enhancement of the coupling efficiency by 500% as compared to conventional SAW devices. Additionally, these devices are more mechanically robust and can be monolithically integrated with a CMOS platform without requiring complex packaging processes as compared to conventional released lamb wave resonators.