A New Nonisolated Single-Input Three-Output High Voltage Gain Converter With Low Voltage Stresses on Switches and Diodes
- 27 August 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (6) , 4308-4318
Abstract
In this paper, an expandable single-input three-output dc-dc boost converter is proposed. The voltage conversion ratio of the output ports of the converter can be increased by inductor-diode-capacitor and diode-capacitor cells. Then, the proposed converter is kind of a switched-capacitor high step-up dc-dc converter. The main advantage of the proposed converter is supplying loads with different voltages and currents ranges due to the expandable structure of the converter. Besides, the proposed converter has the merit of achieving high voltage gains at high frequencies without preselecting wide duty cycles. Furthermore, the proposed converter is able to achieve higher voltage ranges without having any transformer or coupled inductors in its structure, consequently the related drawbacks are avoided. The switching pattern of the converter is simple and both switches goes on and off simultaneously. In this study, a single switching period of the proposed converter, the voltage conversion ratios of the output ports and the expanded form of the structure is analyzed theoretically. Finally, to verify the theoretical results, the experimental results for 22-V input/88-V, 55-V and 198-V output with 350-W are extracted and compared with each other.Keywords
This publication has 37 references indexed in Scilit:
- Non‐isolated multi‐input–single‐output DC/DC converter for photovoltaic power generation systemsIET Power Electronics, 2014
- A Novel High Step-up DC/DC Converter Based on Integrating Coupled Inductor and Switched-Capacitor Techniques for Renewable Energy ApplicationsIEEE Transactions on Power Electronics, 2014
- Interleaved non‐isolated high step‐up DC/DC converter based on the diode–capacitor multiplierIET Power Electronics, 2014
- Multi‐input voltage‐summation converter based on switched‐capacitorIET Power Electronics, 2013
- A Novel Transformer-less Adaptable Voltage Quadrupler DC Converter with Low Switch Voltage StressIEEE Transactions on Power Electronics, 2013
- Single‐stage multi‐port DC–DC converter topologyIET Power Electronics, 2013
- Dual-input isolated full-bridge boost dc–dc converter based on the distributed transformersIET Power Electronics, 2012
- High step-up converter with capacity of multiple inputIET Power Electronics, 2012
- Multi-output buck–boost converter with enhanced dynamic response to load and input voltage changesIET Power Electronics, 2011
- Multi-output DC–DC converters based on diode-clamped converters configuration: topology and control strategyIET Power Electronics, 2010