Investigating the Effect of Temperature on the Curing Kinetics Behavior and Mechanical Properties of Epoxy‐Modified Polysulfide
- 18 December 2025
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (10)
Abstract
Epoxy‐modified polysulfide is widely used in coatings and as an adhesive for rocket insulation. Understanding the curing process is essential for enhancing the properties of the material. This research investigates the curing kinetics of epoxy‐modified polysulfide and examines how curing temperature influences its characteristics. In the study, epoxy, polysulfide, and cycloaliphatic amine curing agents are mixed and cured at 25°C, 40°C, and 60°C. The curing durations are determined based on a kinetics model. The curing kinetics are analyzed using differential scanning calorimetry (DSC), employing the Prout‐Tompkins autocatalytic method for modeling. Changes in molecular structure during the curing process are assessed using second derivative analysis from Fourier Transform Infrared Spectroscopy (FTIR). Additionally, the mechanical properties such as hardness, tensile strength, elongation, elastic modulus, and density are measured using a Shore D durometer, a universal testing machine, and a densitometer. Phase separation is examined with a scanning electron microscope (SEM). The results indicate that higher curing temperatures increase density, hardness, tensile strength, and elastic modulus by factors of 1.013, 2.38, 1.75, and 14.95, respectively, while reducing flexibility by 0.75 times. Although phase separation does not occur, higher temperatures do affect the product's opacity.Keywords
Funding Information
- Fakultas Teknik Universitas Indonesia (NKB‐515/UN2.RST/HKP.05.00/2024)
This publication has 26 references indexed in Scilit:
- Fabrication of novel silver-based metal-organic frameworks incorporated mixed matrix microfiltration for antibacterial and hydrophilicity remediationInorganic Chemistry Communications, 2025
- Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systemsComposites Part B: Engineering, 2016
- Thermal and mechanical properties of polysulfide/epoxy copolymer system: the effect of anhydride contentPolymers for Advanced Technologies, 2013
- Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEAComposites Part A: Applied Science and Manufacturing, 2013
- Effect of curing conditions on strength development in an epoxy resin for structural strengtheningComposites Part B: Engineering, 2012
- Investigating of polysulfide and epoxy‐polysulfide copolymer curingMaterialwissenschaft und Werkstofftechnik, 2010
- Study on thermoplastic-modified multifunctional epoxies: Influence of heating rate on cure behaviour and phase separationComposites Science and Technology, 2009
- Epoxy nanocomposites: Analysis and kinetics of curePolymer Engineering & Science, 2004
- A kinetic model for curing reactions of epoxides with aminesPolymer Engineering & Science, 1987
- Analysis of curing kinetics in polymer compositesJournal of Polymer Science Part C: Polymer Letters, 1973