Software for modeling brazing process of spacecraft elements from widely used alloys
- 16 March 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
The article develops a software system module for modeling the brazing of spacecraft elements from widely used alloys based on induction heating. The approach proposed by the authors is based on the use of two-dimensional non-stationary heat conduction equations. A permanent heat source is added to these equations, because heating occurs due to eddy currents. The mathematical model proposed by the authors considers: the geometric parameters of the waveguides, the physical parameters of materials, the initial and boundary conditions, as well as the uneven distribution of the eddy current density in the waveguide. This approach allows you to simulate the brazing process for almost any materials with different geometric parameters used in the aerospace industry. In this work, we simulate the process of induction brazing of pipelines from Alloy 321 stainless steel (UNS S32100). The need to develop a module of the software system is due to: (1) high temperature of the board and the need to withstand the regime; (2) use of duct boxes to create a protective environment; (3) high material costs when developing a new technological process (for example, when brazing a larger pipe). As a result of this work, a software system module was developed and modeling of induction brazing of pipelines in protective environments from Alloy 321 stainless steel was carried out, the results of which are presented in the article.Keywords
This publication has 16 references indexed in Scilit:
- Electromagnetic Modeling and Thermal Analysis of a Non-Axisymmetric System for Induction BrazingEnergies, 2020
- Research the Effect of Stress-Pulse Regulation on the Process of Manual Arc Welding Technological Plates Made of AMg6 Alloy Sheet Material 4mm ThicknessMaterials Science Forum, 2020
- Mathematical functional for thermal distribution calculating during the electron-beam welding processJournal of Physics: Conference Series, 2020
- Constant current induction brazing process optimization of AgCdO15-Cu electrical contactJournal of Manufacturing Processes, 2020
- Calibration of Numerical Model of Magnetic Induction BrazingIEEE Transactions on Magnetics, 2019
- Design Consideration of Induction Brazing Systems2018
- Optimizing the control process parameters for the induction soldering of aluminium alloy waveguide paths1IOP Conference Series: Materials Science and Engineering, 2017
- Ku-band wideband space-borne waveguide slot array antenna2017
- Complex of automated equipment and technologies for waveguides soldering using induction heatingIOP Conference Series: Materials Science and Engineering, 2017
- In situ synthesis of high strength Ag brazing filler metals during induction brazing processScripta Materialia, 2016