Yuriy Seregin
Yuriy Seregin has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Murygin
Reshetnev Siberian State University of Science and Technology,Information Control Systems Department,Krasnoyarsk,Russia
5 shared publications - Vadim Sergeevich Tynchenko
Bauman Moscow State Technical University, Moscow, Russian Federation
5 shared publications - Aleksey Bocharov
Reshetnev Siberian State University of Science and Technology
4 shared publications - Sergei Olegovich Kurashkin
Artificial Intelligence Technology Scientific and Education Center, Bauman Moscow State Technical University, Moscow, Russia
4 shared publications - Elena Vaitekunene
Reshetnev Siberian State University of Science and Technology,Department of Information Economic Systems,Krasnoyarsk,Russia
3 shared publications - Vladimir Viktorovich Bukhtoyarov
Bauman Moscow State Technical University, Moscow, Russian Federation
3 shared publications
Latest Publications
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Road Map "TechNet" National Technological Platform
In the article, for a visual representation of the scientific and methodological approach, as a process of strategic development, a model is used that together can solve all the tasks of an organization for the production of household appliances at the stage of strategic development. The roadmap "TechNet" of the national technology platform, the purpose of its creation and the tasks that it performs have been studied. From the whole variety of strategic alternatives, the choice of the most preferred option was made. It was found that the choice of strategy is influenced by many factors that were considered in the work. It was concluded that the information contained in the roadmap is of a reference nature, cannot be considered as a description of directly implemented activities and is not the basis for the allocation of state support funds in any form.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Road Map "TechNet" National Technological Platform
In the article, for a visual representation of the scientific and methodological approach, as a process of strategic development, a model is used that together can solve all the tasks of an organization for the production of household appliances at the stage of strategic development. The roadmap "TechNet" of the national technology platform, the purpose of its creation and the tasks that it performs have been studied. From the whole variety of strategic alternatives, the choice of the most preferred option was made. It was found that the choice of strategy is influenced by many factors that were considered in the work. It was concluded that the information contained in the roadmap is of a reference nature, cannot be considered as a description of directly implemented activities and is not the basis for the allocation of state support funds in any form.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Theoretical Foundations of the Development Strategy of the Organization for the Production of the Refrigeration Equipment
This paper examines the theoretical basis for the elaboration of a development strategy for an organization producing household appliances, especially refrigeration equipment. We considered what the strategic management is and what it solves. And also studied the basic principles of strategic management. It has been found that there are two approaches to strategic management that differ in how organizations use their resources. Moreover, during the course of the work, issues related of development the strategic management of the organization were identified. It was found that it is economically beneficial for both the supplier and consumers to carry out domestic assembly of foreign equipment, as this allows manufacturers to significantly reduce customs duties and transportation costs. Thus, in order to develop an organization's development strategy, it is necessary to separate the tools to develop a strategy depending on the place of origin. It has proved necessary to apply a scientific and methodological approach, to identify and analyse the gaps and to develop patterns for selecting strategic alternatives.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Theoretical Foundations of the Development Strategy of the Organization for the Production of the Refrigeration Equipment
This paper examines the theoretical basis for the elaboration of a development strategy for an organization producing household appliances, especially refrigeration equipment. We considered what the strategic management is and what it solves. And also studied the basic principles of strategic management. It has been found that there are two approaches to strategic management that differ in how organizations use their resources. Moreover, during the course of the work, issues related of development the strategic management of the organization were identified. It was found that it is economically beneficial for both the supplier and consumers to carry out domestic assembly of foreign equipment, as this allows manufacturers to significantly reduce customs duties and transportation costs. Thus, in order to develop an organization's development strategy, it is necessary to separate the tools to develop a strategy depending on the place of origin. It has proved necessary to apply a scientific and methodological approach, to identify and analyse the gaps and to develop patterns for selecting strategic alternatives.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Construction of a Factor Model Focused on the Reduction of Difficulties in Road Traffic
The article collected and structured data for regression analysis. The reasons for which cork is formed in the city of Krasnoyarsk were considered. Using the collected data, a primary histogram (not tested for emissions) was constructed. The following factors were identified as relevant and weak-influencing factors for the construction of the correlation table, this table helps to identify the superfluous influence on the formation of traffic jams. Taking into account the table, a new histogram was constructed and a correlation table was created, which allows to start regression analysis. At the beginning of the regression analysis regression statistics are used and the variance analysis is carried out, then the regression analysis is made directly and the regression results are summarized. Based on the summing up of the histogram, which takes into account all statistics and calculations, which reflects the predicted number of traffic jams and the real factors influencing the formation of traffic jams.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Construction of a Factor Model Focused on the Reduction of Difficulties in Road Traffic
The article collected and structured data for regression analysis. The reasons for which cork is formed in the city of Krasnoyarsk were considered. Using the collected data, a primary histogram (not tested for emissions) was constructed. The following factors were identified as relevant and weak-influencing factors for the construction of the correlation table, this table helps to identify the superfluous influence on the formation of traffic jams. Taking into account the table, a new histogram was constructed and a correlation table was created, which allows to start regression analysis. At the beginning of the regression analysis regression statistics are used and the variance analysis is carried out, then the regression analysis is made directly and the regression results are summarized. Based on the summing up of the histogram, which takes into account all statistics and calculations, which reflects the predicted number of traffic jams and the real factors influencing the formation of traffic jams.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Software for modeling brazing process of spacecraft elements from widely used alloys
The article develops a software system module for modeling the brazing of spacecraft elements from widely used alloys based on induction heating. The approach proposed by the authors is based on the use of two-dimensional non-stationary heat conduction equations. A permanent heat source is added to these equations, because heating occurs due to eddy currents. The mathematical model proposed by the authors considers: the geometric parameters of the waveguides, the physical parameters of materials, the initial and boundary conditions, as well as the uneven distribution of the eddy current density in the waveguide. This approach allows you to simulate the brazing process for almost any materials with different geometric parameters used in the aerospace industry. In this work, we simulate the process of induction brazing of pipelines from Alloy 321 stainless steel (UNS S32100). The need to develop a module of the software system is due to: (1) high temperature of the board and the need to withstand the regime; (2) use of duct boxes to create a protective environment; (3) high material costs when developing a new technological process (for example, when brazing a larger pipe). As a result of this work, a software system module was developed and modeling of induction brazing of pipelines in protective environments from Alloy 321 stainless steel was carried out, the results of which are presented in the article.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Software for modeling brazing process of spacecraft elements from widely used alloys
The article develops a software system module for modeling the brazing of spacecraft elements from widely used alloys based on induction heating. The approach proposed by the authors is based on the use of two-dimensional non-stationary heat conduction equations. A permanent heat source is added to these equations, because heating occurs due to eddy currents. The mathematical model proposed by the authors considers: the geometric parameters of the waveguides, the physical parameters of materials, the initial and boundary conditions, as well as the uneven distribution of the eddy current density in the waveguide. This approach allows you to simulate the brazing process for almost any materials with different geometric parameters used in the aerospace industry. In this work, we simulate the process of induction brazing of pipelines from Alloy 321 stainless steel (UNS S32100). The need to develop a module of the software system is due to: (1) high temperature of the board and the need to withstand the regime; (2) use of duct boxes to create a protective environment; (3) high material costs when developing a new technological process (for example, when brazing a larger pipe). As a result of this work, a software system module was developed and modeling of induction brazing of pipelines in protective environments from Alloy 321 stainless steel was carried out, the results of which are presented in the article.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Simulation model of the electron beam welding process for the formation of the effective technological parameters during the welding of aerospace structures
The setting of technological parameters, in particular the beam current and speed in electron beam welding, are an integral part of the process. However, to set the mode when welding a new product or changing equipment (for example, buying a new installation or replacing an electron-beam gun or a drive for rotating a turntable), it is currently necessary to search for technological parameters (welding speed, beam current) by carrying out full-scale experiments, which is a resource and financially costly. Thus, in this work, the authors propose to carry out imitation modeling of the process of electron beam welding of a disk with a cylinder made of titanium alloy (Ti-4Al-3Mo-1V) in COMSOL Multiphysics, in order to develop the proposed technology to obtain optimal technological parameters in electron beam welding. thin-walled structures. The structure to be welded consists of two components: a hollow cylinder with a diameter of 78 mm, a height of 80 mm and a disc with a diameter of 76 mm, a thickness of 12 mm with a through hole, the wall thickness of the cylinder along which welding is 3 mm. As a result, the authors carried out modeling and obtained graphs of product heating, which depict the temperature distribution. The mode corresponding to the requirements put forward, the width of the weld 2 mm, the height of the seam 1mm was obtained with the following technological parameters: welding speed 1.2 cm/s, beam current 67 mA, accelerating voltage 30 kV, focusing current 139 mA.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Simulation model of the electron beam welding process for the formation of the effective technological parameters during the welding of aerospace structures
The setting of technological parameters, in particular the beam current and speed in electron beam welding, are an integral part of the process. However, to set the mode when welding a new product or changing equipment (for example, buying a new installation or replacing an electron-beam gun or a drive for rotating a turntable), it is currently necessary to search for technological parameters (welding speed, beam current) by carrying out full-scale experiments, which is a resource and financially costly. Thus, in this work, the authors propose to carry out imitation modeling of the process of electron beam welding of a disk with a cylinder made of titanium alloy (Ti-4Al-3Mo-1V) in COMSOL Multiphysics, in order to develop the proposed technology to obtain optimal technological parameters in electron beam welding. thin-walled structures. The structure to be welded consists of two components: a hollow cylinder with a diameter of 78 mm, a height of 80 mm and a disc with a diameter of 76 mm, a thickness of 12 mm with a through hole, the wall thickness of the cylinder along which welding is 3 mm. As a result, the authors carried out modeling and obtained graphs of product heating, which depict the temperature distribution. The mode corresponding to the requirements put forward, the width of the weld 2 mm, the height of the seam 1mm was obtained with the following technological parameters: welding speed 1.2 cm/s, beam current 67 mA, accelerating voltage 30 kV, focusing current 139 mA.
- 20 February 2022
- Published by Krasnoyarsk Science and Technology City Hall
Software development based on artificial neural networks for fitness club
An artificial neural network is a system of simple processors (artificial neurons) that are connected and interact with each other. Programming neural networks means training the network, not writing program code. Thanks to training, the network is able to identify dependencies between data (input and output), generalize, simplify the results, and use knowledge to break down complex problems into simpler ones. The aim of the presented work is to improve the efficiency of managing the needs of the clients of the fitness club through the use of modern methods of data analysis. As a technology for the implementation of such an analysis, the work uses neural networks of a special type - Kohonen networks. On the basis of the proposed approach, the final software product is being developed to improve the quality of management of a fitness club.
- 20 February 2022
- Published by Krasnoyarsk Science and Technology City Hall
Software development based on artificial neural networks for fitness club
An artificial neural network is a system of simple processors (artificial neurons) that are connected and interact with each other. Programming neural networks means training the network, not writing program code. Thanks to training, the network is able to identify dependencies between data (input and output), generalize, simplify the results, and use knowledge to break down complex problems into simpler ones. The aim of the presented work is to improve the efficiency of managing the needs of the clients of the fitness club through the use of modern methods of data analysis. As a technology for the implementation of such an analysis, the work uses neural networks of a special type - Kohonen networks. On the basis of the proposed approach, the final software product is being developed to improve the quality of management of a fitness club.
- 24 September 2021
- Published by Springer Nature
- p. 71-78
Hardware Control of the Electron Beam Energy Density by the Heating Spot
- 24 September 2021
- Published by Springer Nature
- p. 71-78
Hardware Control of the Electron Beam Energy Density by the Heating Spot
- 20 July 2021
- Published by Springer Nature
- p. 331-339
Modeling the Temperature Field Distribution at the Stages of Input-Output of the Electron Beam
- 20 July 2021
- Published by Springer Nature
- p. 331-339
Modeling the Temperature Field Distribution at the Stages of Input-Output of the Electron Beam