Novel Resistance Measurement Method: Analysis of Accuracy and Thermal Dependence with Applications in Fiber Materials
Open Access
Abstract
Material resistance is important since different physicochemical properties can be extracted from it. This work describes a novel resistance measurement method valid for a wide range of resistance values up to 100 GΩ at a low powered, small sized, digitally controlled and wireless communicated device. The analog and digital circuits of the design are described, analysing the main error sources affecting the accuracy. Accuracy and extended uncertainty are obtained for a pattern decade box, showing a maximum of accuracy for temperatures below 30 C in the range from 1 MΩ to 100 GΩ. Thermal analysis showed stability up to 50 C for values below 10 GΩ and systematic deviations for higher values. Power supply applied to the measurement probes is also analysed, showing no differences in case of the pattern decade box, except for resistance values above 10 GΩ and temperatures above 35 C. To evaluate the circuit behaviour under fiber materials, an 11-day drying process in timber from four species (Oregon pine-Pseudotsuga menziesii, cedar-Cedrus atlantica, ash-Fraxinus excelsior, chestnut-Castanea sativa) was monitored. Results show that the circuit, as expected, provides different resistance values (they need individual conversion curves) for different species and the same ambient conditions. Additionally, it was found that, contrary to the decade box analysis, affects the resistance value due to material properties. In summary, the proposed circuit is able to accurately measure material resistance that can be further related to material properties.
Keywords
Funding Information
- Vicerectorat d'Investigacio i Politica Cientifica de la Universitat de Valencia (Valoritza i Transfereix. Humiwood.)
This publication has 24 references indexed in Scilit:
- Electrical impedance measurements for detecting artificial chemical additives in liquid food productsFood Control, 2016
- Experimental investigation on the effect of detail design on wood moisture content in outdoor above ground applicationsBuilding and Environment, 2013
- Design of a measurement cell for low-frequency dielectric spectroscopy of biological cell suspensionsMeasurement Science and Technology, 2011
- Bioimpedance: A Review for Food ProcessingFood Engineering Reviews, 2010
- Measurement system for long-term recording of wood moisture content with internal conductively glued electrodesBuilding and Environment, 2008
- Development and testing of a nodal resistance measurement (NRM) system for composite structuresMeasurement, 2008
- RF Impedance Method for Estimating Moisture Content in Small Samples of In-Shell PeanutsIEEE Transactions on Instrumentation and Measurement, 2007
- Sources of error in tetrapolar impedance measurements on biomaterials and other ionic conductorsJournal of Physics D: Applied Physics, 2006
- Factors affecting the complex permittivity spectrum of soil at a low frequency range of 1 kHz–10 MHzEnvironmental Geology, 2006
- Inductive Loops in Impedance Spectroscopy Caused by Electrical ShieldingJournal of the Electrochemical Society, 1996