Taras Iakymchuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Taras Iakymchuk has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Alfredo Rosado-Muñoz
Universitat de València
4 shared publications - Jose-Vicente Frances-Villora
Universitat de València
2 shared publications - Asgar Abbaszadeh
Sahand University of Technology
1 shared publication - Jorge Samaniego
GDDP. Department Electronic Engineering, School of Engineering, Universitat de Valencia, Burjassot, 46100 Valencia, Spain
1 shared publication - Juan Barrios-Avilés
Group for Digital Design and Processing, Department of Electronic Engineering, School of Engineering, Universitat de Valencia, Burjassot, 46100 Valencia, Spain
1 shared publication - Juan Guerrero
Processing and Digital Design Group, Department of Electronic Engineering, University of Valencia, 46100 Burjassot, Spain
1 shared publication
Latest Publications
- Open Access
- 15 January 2019
- Published by MDPI AG in Electronics
- Vol. 8 (1) , 94
AnScalable Matrix Computing Unit Architecture for FPGA, and SCUMO User Design Interface
High dimensional matrix algebra is essential in numerous signal processing and machine learning algorithms. This work describes a scalable square matrix-computing unit designed on the basis of circulant matrices. It optimizes data flow for the computation of any sequence of matrix operations removing the need for data movement for intermediate results, together with the individual matrix operations’ performance in direct or transposed form (the transpose matrix operation only requires a data addressing modification). The allowed matrix operations are: matrix-by-matrix addition, subtraction, dot product and multiplication, matrix-by-vector multiplication, and matrix by scalar multiplication. The proposed architecture is fully scalable with the maximum matrix dimension limited by the available resources. In addition, a design environment is also developed, permitting assistance, through a friendly interface, from the customization of the hardware computing unit to the generation of the final synthesizable IP core. For matrices, the architecture requires N ALU-RAM blocks and performs , requiring and clock cycles for matrix-matrix and matrix-vector operations, respectively. For the tested Virtex7 FPGA device, the computation for matrices allows a maximum clock frequency of 346 MHz, achieving an overall performance of 173 GOPS. This architecture shows higher performance than other state-of-the-art matrix computing units.- 15 January 2019
- Published by MDPI AG in Electronics
- Vol. 8 (1) , 94
Open AccessAnScalable Matrix Computing Unit Architecture for FPGA, and SCUMO User Design Interface
High dimensional matrix algebra is essential in numerous signal processing and machine learning algorithms. This work describes a scalable square matrix-computing unit designed on the basis of circulant matrices. It optimizes data flow for the computation of any sequence of matrix operations removing the need for data movement for intermediate results, together with the individual matrix operations’ performance in direct or transposed form (the transpose matrix operation only requires a data addressing modification). The allowed matrix operations are: matrix-by-matrix addition, subtraction, dot product and multiplication, matrix-by-vector multiplication, and matrix by scalar multiplication. The proposed architecture is fully scalable with the maximum matrix dimension limited by the available resources. In addition, a design environment is also developed, permitting assistance, through a friendly interface, from the customization of the hardware computing unit to the generation of the final synthesizable IP core. For matrices, the architecture requires N ALU-RAM blocks and performs , requiring and clock cycles for matrix-matrix and matrix-vector operations, respectively. For the tested Virtex7 FPGA device, the computation for matrices allows a maximum clock frequency of 346 MHz, achieving an overall performance of 173 GOPS. This architecture shows higher performance than other state-of-the-art matrix computing units. - Open Access
- 7 November 2018
- Published by MDPI AG in Electronics
- Vol. 7 (11) , 304
Movement Detection with Event-Based Cameras: Comparison with Frame-Based Cameras in Robot Object Tracking Using Powerlink Communication
Event-based cameras are not common in industrial applications despite the fact that they can add multiple advantages for applications with moving objects. In comparison with frame-based cameras, the amount of generated data is very low while keeping the main information in the scene. For an industrial environment with interconnected systems, data reduction becomes very important to avoid network congestion and provide faster response time. However, the use of new sensors as event-based cameras is not common since they do not usually provide connectivity to industrial buses. This work develops a network node based on a Field Programmable Gate Array (FPGA), including data acquisition and tracking position for an event-based camera. It also includes spurious reduction and filtering algorithms while keeping the main features at the scene. The FPGA node also includes the stack of the network protocol to provide standard communication among other nodes. The powerlink IEEE 61158 industrial network is used to communicate the FPGA with a controller connected to a self-developed two-axis servo-controlled robot. The inverse kinematics model for the robot is included in the controller. To complete the system and provide a comparison, a traditional frame-based camera is also connected to the controller. Response time and robustness to lighting conditions are tested. Results show that, using the event-based camera, the robot can follow the object using fast image recognition achieving up to 85% percent data reduction providing an average of 99 ms faster position detection and less dispersion in position detection (4.96 mm vs. 17.74 mm in the Y-axis position, and 2.18 mm vs. 8.26 mm in the X-axis position) than the frame-based camera, showing that event-based cameras are more stable under light changes. Additionally, event-based cameras offer intrinsic advantages due to the low computational complexity required: small size, low power, reduced data and low cost. Thus, it is demonstrated how the development of new equipment and algorithms can be efficiently integrated into an industrial system, merging commercial industrial equipment with new devices.
- 7 November 2018
- Published by MDPI AG in Electronics
- Vol. 7 (11) , 304
Open AccessMovement Detection with Event-Based Cameras: Comparison with Frame-Based Cameras in Robot Object Tracking Using Powerlink Communication
Event-based cameras are not common in industrial applications despite the fact that they can add multiple advantages for applications with moving objects. In comparison with frame-based cameras, the amount of generated data is very low while keeping the main information in the scene. For an industrial environment with interconnected systems, data reduction becomes very important to avoid network congestion and provide faster response time. However, the use of new sensors as event-based cameras is not common since they do not usually provide connectivity to industrial buses. This work develops a network node based on a Field Programmable Gate Array (FPGA), including data acquisition and tracking position for an event-based camera. It also includes spurious reduction and filtering algorithms while keeping the main features at the scene. The FPGA node also includes the stack of the network protocol to provide standard communication among other nodes. The powerlink IEEE 61158 industrial network is used to communicate the FPGA with a controller connected to a self-developed two-axis servo-controlled robot. The inverse kinematics model for the robot is included in the controller. To complete the system and provide a comparison, a traditional frame-based camera is also connected to the controller. Response time and robustness to lighting conditions are tested. Results show that, using the event-based camera, the robot can follow the object using fast image recognition achieving up to 85% percent data reduction providing an average of 99 ms faster position detection and less dispersion in position detection (4.96 mm vs. 17.74 mm in the Y-axis position, and 2.18 mm vs. 8.26 mm in the X-axis position) than the frame-based camera, showing that event-based cameras are more stable under light changes. Additionally, event-based cameras offer intrinsic advantages due to the low computational complexity required: small size, low power, reduced data and low cost. Thus, it is demonstrated how the development of new equipment and algorithms can be efficiently integrated into an industrial system, merging commercial industrial equipment with new devices.
- Open Access
Novel Resistance Measurement Method: Analysis of Accuracy and Thermal Dependence with Applications in Fiber Materials
Material resistance is important since different physicochemical properties can be extracted from it. This work describes a novel resistance measurement method valid for a wide range of resistance values up to 100 GΩ at a low powered, small sized, digitally controlled and wireless communicated device. The analog and digital circuits of the design are described, analysing the main error sources affecting the accuracy. Accuracy and extended uncertainty are obtained for a pattern decade box, showing a maximum of accuracy for temperatures below 30 C in the range from 1 MΩ to 100 GΩ. Thermal analysis showed stability up to 50 C for values below 10 GΩ and systematic deviations for higher values. Power supply applied to the measurement probes is also analysed, showing no differences in case of the pattern decade box, except for resistance values above 10 GΩ and temperatures above 35 C. To evaluate the circuit behaviour under fiber materials, an 11-day drying process in timber from four species (Oregon pine-Pseudotsuga menziesii, cedar-Cedrus atlantica, ash-Fraxinus excelsior, chestnut-Castanea sativa) was monitored. Results show that the circuit, as expected, provides different resistance values (they need individual conversion curves) for different species and the same ambient conditions. Additionally, it was found that, contrary to the decade box analysis, affects the resistance value due to material properties. In summary, the proposed circuit is able to accurately measure material resistance that can be further related to material properties.Open AccessNovel Resistance Measurement Method: Analysis of Accuracy and Thermal Dependence with Applications in Fiber Materials
Material resistance is important since different physicochemical properties can be extracted from it. This work describes a novel resistance measurement method valid for a wide range of resistance values up to 100 GΩ at a low powered, small sized, digitally controlled and wireless communicated device. The analog and digital circuits of the design are described, analysing the main error sources affecting the accuracy. Accuracy and extended uncertainty are obtained for a pattern decade box, showing a maximum of accuracy for temperatures below 30 C in the range from 1 MΩ to 100 GΩ. Thermal analysis showed stability up to 50 C for values below 10 GΩ and systematic deviations for higher values. Power supply applied to the measurement probes is also analysed, showing no differences in case of the pattern decade box, except for resistance values above 10 GΩ and temperatures above 35 C. To evaluate the circuit behaviour under fiber materials, an 11-day drying process in timber from four species (Oregon pine-Pseudotsuga menziesii, cedar-Cedrus atlantica, ash-Fraxinus excelsior, chestnut-Castanea sativa) was monitored. Results show that the circuit, as expected, provides different resistance values (they need individual conversion curves) for different species and the same ambient conditions. Additionally, it was found that, contrary to the decade box analysis, affects the resistance value due to material properties. In summary, the proposed circuit is able to accurately measure material resistance that can be further related to material properties. - Open Access
- 19 February 2015
- Published by Springer Nature in EURASIP Journal on Image and Video Processing
- Vol. 2015 (1) , 4
Simplified spiking neural network architecture and STDP learning algorithm applied to image classification
- 19 February 2015
- Published by Springer Nature in EURASIP Journal on Image and Video Processing
- Vol. 2015 (1) , 4
Open AccessSimplified spiking neural network architecture and STDP learning algorithm applied to image classification