Design and testing of a novel XYZ nanopositioning stage with hybrid structure
Authors:
- 6 August 2016
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 230 (9) , 1765-1770
Abstract
In this article, a novel XYZ nanopositioning stage with hybrid structure configuration is developed to obtain translation motions along the x, y and z directions with high working bandwidth. A novel Z-shaped flexural guidance unit with self-amplification is adopted to generate motions along the x and the z directions by means of differential motion principle. Simultaneously, a right circular-based guidance unit is embedded to generate the motion along the y direction independently. The corresponding working principles in the three directions are detailed in this article. In addition, the statics and dynamics performances of the developed mechanism are investigated by experiments. The workspace of the XYZ stage can reach up to 20.8 µm × 12.2 µm × 23.1 µm with a practical working bandwidth larger than 250 Hz.Keywords
This publication has 10 references indexed in Scilit:
- Development of a piezoelectrically actuated two-degree-of-freedom fast tool servo with decoupled motions for micro-/nanomachiningPrecision Engineering, 2014
- Development of a 2-degree-of-freedom decoupled flexural mechanism for micro/nanomachiningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014
- Analysis and experiments of a novel and compact 3-DOF precision positioning platformJournal of Mechanical Science and Technology, 2013
- Development of pseudo-random diamond turning method for fabricating freeform optics with scattering homogenizationOptics Express, 2013
- Design, Analysis, and Test of a Novel 2-DOF Nanopositioning System Driven by Dual ModeIEEE Transactions on Robotics, 2013
- A Totally Decoupled Piezo-Driven XYZ Flexure Parallel Micropositioning Stage for Micro/NanomanipulationIEEE Transactions on Automation Science and Engineering, 2010
- Analysis of surface generation in ultra-precision machining with a fast tool servoProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010
- Development of a middle-range six-degrees-of-freedom systemProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009
- Design and Modeling of a High-Speed AFM-ScannerIEEE Transactions on Control Systems Technology, 2007
- Static and dynamic analysis of a nanopositioning flexure-hinge stage with a flexible lever mechanismProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005