Biostable Fluorine-Containing Coatings on the Surface of Polymers
Open Access
Abstract
We considered the formation of the integrated biostable coating on the surface of several polymers using the original gas-phase fluorination technology. The effectiveness of surface modification of low-density polyethylene (LDPE) and polypropylene (PP) was confirmed by corresponding changes in the absorption spectra of infrared radiation with the modified samples. The gas-phase fluorination quality of ultrahigh molecular weight polyethylene (UHMWPE) and nitrile butadiene rubber (NBR) surfaces was evidenced by the results of scanning electron microscopy (SEM) and energy dispersion analysis (EDS). As was shown with the direct measurements of water and ethyleneglycol wetting angles, the properties differences of the polymer materials with modified surfaces from the initial one correlated well with the change in free surface energy induced by the chemical and morphological transformations under the fluorine and oxygen-containing gas mixtures treatment. The developed technique for the bio-contamination degree quantifying, based on the computer analysis of the corresponding images, allowed us to establish that gas-phase fluorination of the surface approximately doubles the time during which the biofouling of LDPE, PP and UHMWPE with the mixed colony of Rivularia and Stigonema Minutum algae occurs under natural conditions. No positive effect from fluorination was observed for NBR, which was explained, from our point of view, by the difference in the mechanisms of biostability for the considered polymer materials.Keywords
Funding Information
- Moscow Polytechnic University
This publication has 29 references indexed in Scilit:
- Improvement of polypropylene nonwoven fabric antibacterial properties by the direct fluorinationRSC Advances, 2015
- Quaternary Ammonium Biocides: Efficacy in ApplicationApplied and Environmental Microbiology, 2015
- Domestic and Indoor Microbiology2015
- Simulation of chemical modification of polymer surfaceJournal of Fluorine Chemistry, 2014
- Superhydrophobic surfaces for the reduction of bacterial adhesionRSC Advances, 2013
- Biocidal polymers: synthesis and antimicrobial properties of benzaldehyde derivatives immobilized onto amine-terminated polyacrylonitrileBMC Chemistry, 2012
- Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional PrinciplesPolymers, 2012
- Modification of ultra‐high‐molecular weight polyethylene by various fluorinating routesJournal of Polymer Science Part A: Polymer Chemistry, 2011
- Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine OrganismsAdvanced Materials, 2010
- Direct fluorination of polymers—From fundamental research to industrial applicationsProgress in Organic Coatings, 2008