Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Victor G. Nazarov has a total of 108 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantitative Analysis of Composite Polymeric Membrane Structure Using Contour Morphological Heterogeneity Functions

    by Georgy Rytikov, Fedor Doronin, Yuriy Rudyak, Andrey Evdokimov, Alexander Tarasov, Victor Nazarov

    We have developed a quantitative method for characterizing the actual multilayer polymer material-made membranes’ architecture with a computer analysis of their scanning electron microscopy (SEM) images. The proposed approach consists of contour morphological heterogeneity function (CMHF) calculations. The approbation was carried out on polysulfone, polytetrafluoroethylene and polyimide-made membranes. The corresponding CMHF series were computed for different depths. It was possible to identify the structural zones’ location for all the considered membranes. The developed technique provides the possibility of standardizing the SEM images’ analysis and determining the thicknesses of the surface, transition and volumetric layers of filtering and separating equipment elements. The suggested algorithm can automate the membrane’s structure and architecture metrological analysis with computer vision techniques.

  • Open Access

    The Concept of a 3D-Printed Microfluidic Device on Oxyfluorinated PDMS Substrates

    by Fedor Doronin, Georgy Rytikov, Andrey Evdokimov, Mikhail Savel’ev, Anna Rudakova, Yuriy Rudyak, Victor Nazarov

    We present the concept of a microfluidic device manufactured using 3D printing and oxyfluorination techniques. During prototype testing, it was found that a larger number of cells adhered to the oxyfluorinated surface compared to the original one. It has also been shown that longer gas-phase treatments correspond to a higher level of cell growth. These items can be used in experiments with reagents and/or microorganisms that cause glass surface corrosion. This increases the number of production techniques for microfluidics devices, expands the possibilities for their use in biotechnology, and solves the main problem of low interlayer adhesion between components of polymer-made microfluidic devices.


  • Open Access

    Design of Functional Fluorine-Containing Coatings for 3D-Printed Items

    by Fedor Doronin, Georgy Rytikov, Andrey Evdokimov, Mikhail Savel’ev, Yuriy Rudyak, Victor Nazarov

    In this study, a surface texture design technique for 3D-extruded prototype products was developed. The study determines some target functional properties of polymer-made items. Four series of experimental samples (acrylonitrile–butadiene–styrene (ABS), thermoplastic polyurethane (TPU), polylactide (PLA), and polyethylene terephthalate glycol (PETG)) were 3D-printed using the fused filament fabrication (FFF) approach. The morphology and hydrophilic/hydrophobic balance of the surfaces of the experimental samples were regulated directly by the 3D design and by gas-phase fluorination techniques. The observed distilled water and ethylene glycol edge wetting angles of the surfaces of the experimental samples were determined by a 3D filament stroke arrangement. It was shown that varying the 3D design promoted hydrophobization and provided anisotropic wetting (the distilled water edge angle of the same sample varies from 76 to 116 degrees). The textured surfaces simultaneously demonstrated hydrophilicity in one direction and hydrophobicity in the other. The changing of the fluorine-containing gas mixture surface treatment duration allowed us to alter the hydrophilic/hydrophobic balance of 3D-extruded prototypes. The fluorination kinetics of the experimental samples were studied empirically. The combination of macroscopic surface design (through FFF 3D printing) and microscopic surface modification (through gas-phase fluorination) permitted a significant reduction in the straining friction coefficient and increased the wettability of the complex-shaped 3D-printed products.


  • Open Access

    Biomimetic Functional Fluorinated Oxygen-Containing Coatings on 3D-Printing Composite Polymer Items

    by Georgy Rytikov, Fedor Doronin, Andrey Evdokimov, Mikhail Savel’ev, Yuriy Rudyak, Victor Nazarov

    We manufactured the 3D-printed prototypes with increased wear resistance using a combination of the following: biomimetic design (the shark skin was used as a natural object to follow), 3D-printing technological parameter regulation, rational choice of polymer matrix, dispersed filling ingredients and items’ surface gas-phase modification technique. It was established that the bulk modification of the PETG filament with montmorillonite, graphite nano-plates, and other ingredients can reduce the 3D-printed prototypes’ wear by up to eight times. The gas-phase fluorination of the product’s surface provides a decrease in the rest friction coefficient and temperature in the “indentor-3D-printed disk” contact pair. We obtained the texture models and quantified the degree of similarity between the shark skin and the 3D-printed prototypes’ surfaces.


  • Thermomechanical Treatment of Nonwoven Needle-Punched Fabrics

    by N. I. Godin, A. G. Evdokimov, A. V. Dedov, V. G. Nazarov

  • Open Access

    Design of a Hybrid 3D-Printed Composite Material Based on Non-Woven Needle-Punched Fabrics with Radio-Absorbing Properties

    by Victor Nazarov, Fedor Doronin, Alexander Dedov, Andrey Evdokimov, Georgy Rytikov, Mikhail Savel’ev

    The paper proposes a manufacturing technology for the non-woven/3D-printed (N3DP) hybrid material (HM) with improved radio-absorbing properties. We have fabricated the needle-punched non-woven felt and impregnated it with the carbon fibers containing UV-curable photopolymer resin. The functional 3D-printed layer was attached to the highly porous, deformable polymer substrate by the fused deposition modeling (FDM) technique. The preliminary bulk modification of the filament was realized with the IR- and UV-pigment microcapsules filling. The combination of additive prototyping and non-woven needle-punched fabrics surface modification (by the electrically conductive elements 2D-periodic system applying) expands the frequency range of the electromagnetic radiation effective absorption. It provides the possibility of a reversible change in the color characteristics of the hybrid material surface under the influence of the UV and IR radiation.


  • Open Access

    The Air Permeability and the Porosity of Polymer Materials Based on 3D-Printed Hybrid Non-Woven Needle-Punched Fabrics

    by Victor Nazarov, Alexander Dedov, Fedor Doronin, Mikhail Savel’ev, Andrey Evdokimov, Georgy Rytikov

    The possibility of controlling the porosity and, as a result, the permeability of fibrous non-woven fabrics was studied. Modification of experimental samples was performed on equipment with adjustable heating and compression. It was found that the modification regimes affected the formation of the porous structure. We found that there was a relationship between the permeability coefficient and the porosity coefficient of the materials when the modification speed and temperature were varied. A model is proposed for predicting the permeability for modified material with a given porosity. As the result, a new hybrid composite material with reversible dynamic color characteristics that changed under the influence of ultraviolet and/or thermal exposure was produced. The developed technology consists of: manufacture of the non-woven needle-punched fabrics, surface structuring, material extrusion, additive manufacturing (FFF technology) and the stencil technique of ink-layer adding. In our investigation, we (a) obtained fibrous polymer materials with a porosity gradient in thickness, (b) determined the dependence of the material’s porosity coefficient on the speed and temperature of the modification and (c) developed a model for calculating the porosity coefficient of the materials with specified technological parameters.