In situ formation of PE‐EPR core‐shell rubber particles in polypropylene matrix by melt blending: Effect of PE chain structure and viscosity
Authors:
- 10 September 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (46)
Abstract
Twenty types of polyethylene (PE) including high density polyethylene (HDPE) and linear low‐density polyethylene (LLDPE) with various viscosity were used to study the in‐situ formation of PE‐ ethylene propylene rubber (EPR) core‐shell rubber particles (CSRP) in polypropylene (PP) matrix by melt blending. The results show that PE and EPR cannot form CSRP if PE melt flow index (MFI) is lower than about 0.3 g/10 min. As a result, the impact fracture of PP/PE/EPR composite is brittle. If PE MFI is higher than 0.3 g/10 min, PE and EPR can form CSRP, leading to the ductile impact fracture of PP/PE/EPR composite. Interestingly, upper limit content of PE for the formation of CSRP depends on the type and viscosity of PE. For HDPE, upper limit content of PE tends to increase with the increase of its MFI, whereas it drops considerably for LLDPE. Understanding these relationships provides insights into optimizing the selection of core types and viscosity for enhancing the mechanical properties of polymer composites with core‐shell structure. This may potentially guide the development of cost‐effective and high‐performance polymer composites.Keywords
Funding Information
- National Natural Science Foundation of China (22373009, U21A2088)
This publication has 34 references indexed in Scilit:
- How do the core mechanical properties affect the toughening of polypropylene with core-shell particles?Journal of Polymer Research, 2023
- In situ formation of core‐shell rubber particles in polypropylene matrix by melt blending and its effects on the toughness and stiffness of the compositesPolymer Engineering & Science, 2022
- Improving the toughness and flame retardancy of poly (lactic acid) with phosphorus‐containing core‐shell particlesJournal of Applied Polymer Science, 2022
- Elasticity or viscosity, which one is more influential on the internal structure of a core-shell morphology in ternary blends?Journal of Polymer Research, 2017
- Fabrication of polypropylene blends with excellent low‐temperature toughness and balanced toughness‐rigidity by a combination of EPR and SEEPSJournal of Applied Polymer Science, 2017
- Structure–property relationships in ternary polymer blends with core–shell inclusions: revisiting the critical role of the viscosity ratioJournal of Polymer Research, 2016
- Deformation, yield and fracture of elastomer‐modified polypropyleneJournal of Applied Polymer Science, 2003
- Micromechanical deformation processes in toughened PP/PA/SEBS-g-MA blends prepared by reactive processingActa Polymerica, 1998
- Impact-modified nylon 6/polypropylene blends: 2. Effect of reactive functionality on morphology and mechanical propertiesPolymer, 1995
- Fiber reinforced rubber modified polypropylenePolymer Engineering & Science, 1975