Recycling of Epoxy Resin via Blending with Polycaprolactone for Fused Filament Fabrication 3D Printing Applications
Open Access
- 15 June 2025
- journal article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 310 (10)
Abstract
As a way of recycling epoxy thermoset materials, they were blended with polycaprolactone (PCL) and processed in the form of filament to be used for fused deposition modeling (FDM) 3D printing. Three different epoxy materials were considered: a lab‐cured epoxy resin, a lab‐cured epoxy/PCL blend, and a commercial epoxy composite containing fiberglass (FR4). These three thermosets were milled and mixed with pure PCL. The distribution of the epoxy in the PCL matrix was analyzed by Fourier Transform Infrared Spectroscopy (FTIR) coupled to a microscope. The filler FR4 and DGEBA were adequately distributed in the matrix. The rheological study anticipated good adhesion between the layers, without clogging at printing temperatures. The rheological model also predicted filament buckling. Because of that, external assistance (PLA) was required to obtain appropriate printed samples, avoiding buckling. The mechanical properties of the specimens were determined by tensile tests and compared with injection molded specimens. It was observed that the incorporation of the epoxy thermoset to the PCL matrix enhanced Young's modulus of PCL. Very similar results were obtained between 3D printed and injected samples. The proposed method could be of significant interest in employing thermoset epoxy waste as a cost‐effective reinforcement for fuse filament 3D printing materials.Keywords
This publication has 58 references indexed in Scilit:
- Continuous glass fiber‐reinforced polycaprolactone composite produced in a conventional fused filament fabrication equipment: Process modeling and parameters adjustmentJournal of Applied Polymer Science, 2024
- Mechanical recycling process: An alternative for a viable disposal of carbon fiber‐reinforced thermoplastic wastePolymer Engineering & Science, 2024
- Progress in Chemical Recycling of Carbon Fiber Reinforced Epoxy CompositesMacromolecular Rapid Communications, 2022
- Effects of crystallization temperature and spherulite size on cracking behavior of semi-crystalline polymersPolymer Bulletin, 2016
- Recycling of Polymers: A ReviewChemSusChem, 2014
- Thermal Properties Evolution of PCB FR4 Epoxy Composites for Mechatronic During Very Long AgeingMacromolecular Symposia, 2012
- Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre/PCL compositeActa Biomaterialia, 2008
- Effect of temperature on elastic properties of woven-glass epoxy composites for printed circuit board applicationsJournal of Electronic Materials, 2003
- The Thermodynamic Relations between the Melting Point and the Size of CrystalsJournal of Colloid and Interface Science, 2001
- Investigation of the effect of spherulite size on the strength and deformation characteristics of isotactic polypropylene filmsMaterials Science, 1971