Mineral Phase Transformation-Mediated Integrated Separation for Calcium Carbide Slag Purification and CaCO3 Production
- 7 November 2026
- journal article
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Abstract
Calcium carbide slag (CS) mineralization of CO2 to produce CaCO3 is a promising strategy to solid waste utilization and carbon neutrality, yet inherent impurities seriously degrade product purity and whiteness, restricting high-value utilization. Herein, we propose an integrated impurity removal strategy based on high-temperature mineral phase transformation to achieve effective separation of critical impurities. FactSage thermodynamic calculations and experimental investigations revealed that during calcination, SiO2 in CS preferentially reacts with CaO to form Ca2SiO4, while carbon is eliminated as CO2. Effective CaO content and activity increased with calcination temperature and time, peaked at 900 °C and 180 min, then decreased slightly with further calcination. Magnetic FeSi impurities were efficiently removed via wet magnetic separation. Subsequently, the newly formed Ca2SiO4 was separated from the Ca(OH)2 matrix by gravitational settling, exploiting the density difference generated by the phase transformation, achieving a maximum Si removal efficiency of 64.2% under optimized conditions (solid–liquid ratio 1:10, 8 h). A mechanistic model linking thermodynamic driving forces, phase evolution, and separation principles is proposed. Ultimately, a calcite-phase CaCO3 of 98.2% purity and 94.0 whiteness with cubic morphology was produced. An elemental mass balance analysis demonstrates the technical viability of the integrated process. This work provides both mechanistic insights and an engineering basis for producing CaCO3 with improved purity from solid waste via CO2 mineralization.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB4102100)
- Shanxi Scholarship Council of China (2024015)
- Shanxi University
- Salt Lake Chemical Engineering Research Complex, Qinghai University (2024-DXSSKF-07)
- Shanxi Province (202403021221015)
This publication has 32 references indexed in Scilit:
- Enhancing the purity and whiteness of carbonated products from carbide slag via calcination and magnetic separationAdvanced Powder Technology, 2025
- High-dosage carbide slag-based cementitious material: Workability, mechanical strength, and carbonation behavior with the performance enhancementCase Studies in Construction Materials, 2025
- Modelling and optimization of carbon dioxide sequestration potential of carbide slag wasteCase Studies in Chemical and Environmental Engineering, 2025
- How the dispersion and coalescence behaviors of CO2 bubbles affecting carbonation reaction in bubble column reactor: experimental and numerical simulation studyChemical Engineering Journal, 2025
- Optimizing carbonation reaction parameters of calcium carbide slag in acidic/alkaline environment enhancing CO2 mineralization efficiencyChemical Engineering Journal, 2024
- Study on the properties and carbon footprint of low heat cement clinker prepared by recycled concrete powder and calcium carbide slagConstruction and Building Materials, 2024
- Resource utilization of solid waste carbide slag: a brief review of application technologies in various scenesWaste Disposal & Sustainable Energy, 2022
- CO2 mineralization of carbide slag for the production of light calcium carbonatesChinese Journal of Chemical Engineering, 2022
- Relationship between pore structure and hydration activity of CaO from carbide slagChinese Journal of Chemical Engineering, 2019
- Use of Taguchi approach for synthesis of calcite particles from calcium carbide slag for CO2 fixation by accelerated mineral carbonationArabian Journal of Chemistry, 2019