Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huaigang Cheng has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mineral Phase Transformation-Mediated Integrated Separation for Calcium Carbide Slag Purification and CaCO3 Production

    by Bo Wang, Yanli Wang, Huaigang Cheng, Zhuohui Ma, Jincai Zhang, Rafat Siddique

    Calcium carbide slag (CS) mineralization of CO2 to produce CaCO3 is a promising strategy to solid waste utilization and carbon neutrality, yet inherent impurities seriously degrade product purity and whiteness, restricting high-value utilization. Herein, we propose an integrated impurity removal strategy based on high-temperature mineral phase transformation to achieve effective separation of critical impurities. FactSage thermodynamic calculations and experimental investigations revealed that during calcination, SiO2 in CS preferentially reacts with CaO to form Ca2SiO4, while carbon is eliminated as CO2. Effective CaO content and activity increased with calcination temperature and time, peaked at 900 °C and 180 min, then decreased slightly with further calcination. Magnetic FeSi impurities were efficiently removed via wet magnetic separation. Subsequently, the newly formed Ca2SiO4 was separated from the Ca(OH)2 matrix by gravitational settling, exploiting the density difference generated by the phase transformation, achieving a maximum Si removal efficiency of 64.2% under optimized conditions (solid–liquid ratio 1:10, 8 h). A mechanistic model linking thermodynamic driving forces, phase evolution, and separation principles is proposed. Ultimately, a calcite-phase CaCO3 of 98.2% purity and 94.0 whiteness with cubic morphology was produced. An elemental mass balance analysis demonstrates the technical viability of the integrated process. This work provides both mechanistic insights and an engineering basis for producing CaCO3 with improved purity from solid waste via CO2 mineralization.

  • AI‐Assisted Waste Salt Detection: Intelligent Transformation of Reagents, Instruments, and Methods

    by Huaigang Cheng, Ruirui Hou, Fei Wang, Bo Wang

    Reliable characterization is essential for risk assessment, treatment selection, and resource recovery of industrial waste salts. Their variable composition, high salinity, heterogeneous impurities, and matrix effects complicate sampling, pretreatment, measurement, calibration, and interpretation. Artificial intelligence (AI) can support reagent and sensing‐material optimization, instrumentation, signal interpretation, quantitative modeling, multimodal data fusion, validation, and deployment. This review evaluates AI‐assisted waste salt analysis across these workflow stages. Current studies show potential in condition optimization, signal recognition, drift compensation, calibration management, uncertainty evaluation, and result routing. However, direct evidence from representative industrial waste salts remains limited, and validation across independent batches, instruments, and long‐term operation is insufficient. Future work should prioritize matrix‐relevant datasets, metrological traceability, quality assurance, transferability, and workflow‐level evaluation of time, resource use, and reliability.

  • Supersaturation Phase Regions of the Ternary Systems KCl–CaCl2–H2O and KCl–MgCl2–H2O at 273.2 K during Isothermal Evaporation

    by Yun Zhao, Fangyuan Hu, Lingyu Li, Xin Hu, Yujun Ma, Huaigang Cheng, Dong An, Weidong Zhang

    This article presents minor improvements to the traditional experimental method used for obtaining the metastable phase diagram of a ternary water–salt system during isothermal evaporation. Using two ternary systems—namely KCl–CaCl2–H2O and KCl–MgCl2–H2O at 273.2 K—as examples, experiments were conducted with the improved method. The results showed that because the liquid phase was supersaturated, the two-salt cosaturation point in the stable phase equilibrium diagram became a two-salt cosaturation curve in the supersaturation phase diagram when using the improved method. By combining the stable phase diagram with the supersaturation phase diagram obtained using the improved method, the phase-correlation diagram was constructed and the isothermal evaporation–induced supersaturation phase regions of the two ternary systems were obtained. Thus, the supersaturation limit of the isothermal evaporation process was determined. Comparative experiments using the traditional metastable phase diagram method demonstrated that the randomly obtained metastable solubility curve lies within the supersaturation phase region determined using the improved method. In addition, the density and refractive index of each supersaturated liquid-phase point obtained using the improved method in the two ternary systems were determined. The characteristic coefficients of the corresponding empirical formulas used to calculate the density and refractive index were fitted. The calculated values agreed with the measured values.

  • Open Access

    Sustainable Valorization of Carbide Slag Through CO2 Mineralization: Process Sequence-Regulated Impurity Partitioning for High-Purity Calcium Carbonate Production

    by Huaigang Cheng, Jialu Wang, Wenjiao Xu, Zhuohui Ma, Bo Wang, Xiaobing Li

    Direct CO2 mineralization of carbide slag offers considerable potential for sustainable waste valorization, CO2 utilization, and high-value CaCO3 production, although associated Si-, Fe-, and Al-bearing impurities limit product quality. This study comparatively evaluated six process routes to determine how process sequence and separation-stream selection affect impurity partitioning and final product performance. The results suggest that calcination-induced phase reconstruction may improve the separability of impurity-bearing material, while hydrocyclone classification preferentially partitions impurity-rich particles toward the underflow. Relative to the calcined feed, the Si and Fe concentrations in the overflow decreased by 58.4% and 86.9%, respectively, and subsequent magnetic separation further reduced residual Fe. The preferred calcination–hydrocyclone overflow–magnetic separation–mineralization route omitted flotation and produced CaCO3 with a purity of 98.3%, a whiteness approaching 100%, and a total impurity content of 0.57%. These findings provide a process-sequence framework for balancing impurity removal, product quality, resource recovery, and environmental performance during the sustainable conversion of carbide slag into high-value CaCO3.

  • Open Access

    Carbide Slag Decontamination and Mineralization: A Circular Economy Approach to High-Purity CaCO3 and CO2 Storage

    by Huaigang Cheng, Ruirui Hou, Yanli Wang, Bo Wang, Zhuohui Ma, Jincai Zhang

    Calcium carbide slag is a highly alkaline solid waste generated during acetylene production, but its long-term accumulation causes land occupation and persistent environmental risks such as soil alkalinization and water pollution. To support circular economy and carbon emission reduction goals, in this study, we develop an integrated physical decontamination–mineralization process combining calcination, magnetic separation, sedimentation, and CO2 mineralization. After calcination, magnetic separation, and 8 h of gravity sedimentation, the removal efficiency of Si reaches about 67% (residual Si content reduces to 0.43%), while those of Fe and Al are 75.4% and 74.2%, respectively. The purified calcium-rich slurry is then used for CO2 mineralization. Under a solid-to-liquid ratio of 10% and a CO2 flow rate of 0.4 L/min, CO2 is fixed as carbonate solids, yielding calcite-type CaCO3 with 97.88% ± 0.35% purity. This process is centered on physical separation and uses no acids, alkalis, or ammonium salts, avoiding secondary pollution while achieving waste valorization and permanent CO2 sequestration. In this study, we provide a scalable, low-impact pathway for alkaline solid waste valorization and carbon emission reduction, contributing to sustainable consumption and production (SDG 12) and climate action (SDG 13).


  • Dual Effects of Delayed Activation and Ca 2+ Adsorption: Investigation of the Self-Healing Function of Expansive Soil in Solid Waste-Based Cementitious Materials

    by Tong Wang, Huiping Song, Bo Yuan, Dedan Duan, Huaigang Cheng, Jiaoli Gao, Haibin Wu, Zhiwei Bian

    The cost and environmental friendliness of materials are key factors limiting the widespread application of self-healing cementitious materials. This study investigated the influence of low-cost, pollution-free expansive soil (ES) on the crack self-healing properties of cementitious materials prepared from industrial solid wastes: circulating fluidized bed fly ash (CFBFA) and calcium carbide slag (CS). Results indicate that the system incorporating 10% ES achieved a strength recovery rate of 92.7% relative to its original strength after 28 days of self-healing. It could close cracks up to 75.23 μm wide, with ultrasonic pulse velocity (UPV) increasing over time as cracks progressively narrowed. SEM revealed the crack surface covered by hydration products. XRD and TG analysis identified repair products including AFt, C–S–H, and CaCO3. By comparing ES’s delayed activation and Ca2+ adsorption experiments, it was verified that adding ES provides more unhydrated particles during cracking. Simultaneously, montmorillonite adsorbs Ca2+ through electrostatic interactions, causing it to accumulate around the ES particles, while the hydration products deposit on the surface of the cracks. The synergistic action of these two processes enhances the self-healing capacity.

  • Open Access

    CO2 absorption enhancement with a low concentration of monoethanolamine by venturi reactor: Performance, Mass transfer and CFD simulation

    by Bo Wang, Yaokun Zhang, Fei Wang, Fan Li, Xianggang Lu, Huaigang Cheng

    Enhancing the mass transfer coefficient and absorption efficiency for CO2 capture using monoethanolamine (MEA) solution is an unremitting pursuit. In this study, the CO2 absorption performance, volumetric overall mass transfer coefficient () and CFD simulation using a low concentration MEA solution in Venturi reactor were investigated. The results show that both CO2 absorption efficiency and thewith higher MEA flow rates. The maximum CO2 absorption efficiency was 99.6% at an MEA flow rate of 500 L/h under a CO₂ (15 vol%) flow rate of 2 L/min and an MEA concentration of 1.0 wt% in the Venturi reactor. Theincreased from 45.9to 100.6 as the MEA flow rate increased from 200 L/h to 500 L/h. Moreover, the bubble distribution in venturi reactor outlet was affected significantly by the MEA flow rate. CFD simulation results indicated that the the velocity increased significantly with as the MEA flow rate. A distinct low-pressure core region is observed from CFD simulation at the throat under all operating conditions. The CO2 absorption efficiency and theincreased with the increasement of MEA concentration. The CFD simulation result shows that te kinetic rate of reaction increased with MEA concentration. However, the CO2 absorption efficiency and the decreased as the flue gas flow rate increased. The simulation results revealed that the pressure of Venturi throat increased with gas flow rate. Venturi reactor could enhance the CO2 absorption efficiency and thecompared with bubble reactor. The CO2 absorption efficiency andin venturi reactor was increased about 13.8% and 10 times at the gas flow rate of 2 L/min, respectively, compared to the bubble reactor. This study may provide a theoretical foundation for the development of MEA-based CO2 capture technology.