Production of Refractory Bricks through Combustion Synthesis from Metallurgical Wastes and the Thermo-Physical Properties of the Products
Open Access
- 13 September 2022
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 14 (18) , 11439
Abstract
Industrial symbiosis is one of the key approaches to meet sustainable and low carbon production targets. Thus, through circular approaches, it is possible to reduce the use of natural crude materials and make production processes waste-free in the metallurgical industry. The purpose of this study was to study the possibility of using various metallurgical waste and low-grade semi-finished products, which do not have a direct application area, in the production of heat-resistant carbon-containing refractory bricks through the combustion synthesis (CS) method. In the experiments, used metallurgical wastes were wet filter cake (FC), sludge (S), and refractory magnesite scrap (MS) while semi-products were rich and poor dust of chrome spinel (Cr-S). Simultaneously with the experiments, thermochemical simulation studies were carried out using the HSC Chemistry 6.12 to predict the thermodynamic properties of the reactions and possible reaction products. Thermal conductivity coefficients were determined in products in terms of thermal properties of composite samples, they were between 0.511 and 1.020 Wm/K. The phase compositions of the produced samples were determined via XRD technique. The TG-DTA technique was used to characterize thermal behavior of products. In addition, mechanical properties were determined by compression strength test. As a result of experiments, it was observed that Cr-S-rich-based samples showed a promising result in comparison to others: increasing amount of useful carbide phases were formed and demonstrated a high value of mechanical properties. Compression strength was increased from 2.7 MPa (sample №4) to 15.8 MPa (sample №1) with increasing chromite-containing phases in the green samples.Keywords
Funding Information
- Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (AP08857429)
This publication has 18 references indexed in Scilit:
- Production of Iron Based Alloys from Mill Scale through Metallothermic ReductionHigh Temperature Materials and Processes, 2018
- Economics of Solid Waste Management2017
- Assessing the costs of municipal solid waste treatment technologies in developing Asian countriesWaste Management, 2017
- Life Cycle Assessment and Life Cycle Cost Analysis of Magnesia Spinel Brick ProductionSustainability, 2016
- Material Efficiency of Building ConstructionBuildings, 2014
- Characterisation and liberation of chromium from fine ferrochrome waste materialsMinerals Engineering, 2014
- Ash and Slag Waste as a Secondary Raw MaterialProcedia Chemistry, 2014
- Recycling wastes in sinter and hot-metal productionSteel in Translation, 2010
- Historical retrospective of SHS: An autoreviewInternational Journal of Self-Propagating High-Temperature Synthesis, 2008
- Self‐Repairing Function in the Carbon‐Containing RefractoryInternational Journal of Applied Ceramic Technology, 2007