Investigating the Influence of Surface Roughness on Metal Bonding Using Response Surface Methodology
Open Access
- 19 September 2024
- conference paper
- Published by MDPI AG in Engineering Proceedings
- Vol. 75 (1) , 2
Abstract
The present study deals with the parameters for Stainless Steel 304 and Aluminum 5083 optimized with an emphasis on surface roughness, cure time, and their impact on the tensile strength of single-lap shear joints. Utilizing a central composite design, the effects of these factors were examined. Acetone was used to polish the surfaces, and silicon carbide sheets (P30, P36, and P60) were used to abrade them. Utilizing Henkel Loctite HY4090 glue, testing was conducted in accordance with ASTM D1002 guidelines. The variables were optimized with Design-Expert 11. Maximum tensile strengths were obtained with P30 abrasion and a 48-h cure time for SS304 (Ra = 3.2 µm) and Al5083 (Ra = 5 µm), respectively.Keywords
This publication has 12 references indexed in Scilit:
- Effect of surface treatment on adhesively bonded aluminium-aluminium joints regarding aeronautical structuresEngineering Failure Analysis, 2018
- Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applicationsInternational Journal of Adhesion and Adhesives, 2016
- Experimental and numerical study of fatigue crack growth of aluminum alloy 2024-T3 single lap simple bolted and hybrid (adhesive/bolted) jointsEngineering Failure Analysis, 2016
- Surface Roughness Prediction by Response Surface Methodology in Milling of Hybrid Aluminium CompositesProcedia Engineering, 2012
- Adhesion of polymersProgress in Polymer Science, 2009
- Experimental and numerical analysis of single-lap joints for the automotive industryInternational Journal of Adhesion and Adhesives, 2009
- Response surface methodology (RSM) as a tool for optimization in analytical chemistryTalanta, 2008
- Effect of surface roughness on the adhesion properties of Cu/Cr films on polyimide substrate treated by inductively coupled oxygen plasmaSurface and Coatings Technology, 2005
- Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatmentJournal of Materials Science, 2004
- Adhesive failure analysis of pressure-sensitive adhesivesJournal of Polymer Science Part B: Polymer Physics, 1999