Compatibility, Microstructures and Performance of Polylactic Acid, Epoxidized Soybean Oil and Cellulose Fiber Eco‐Composites
Authors:
- 9 August 2026
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (10) , 7708-7731
Abstract
Nowadays, natural fibers reinforced bio‐composites have achieved remarkable development, but their shortcomings in low toughness, high hydrophilicity and poor heat resistance cannot be ignored. Herein, epoxidized soybean oil (ESO) and wood‐based cellulose fiber (CF) are used as the plasticizer and reinforcing filler to modify polylactic acid (PLA). In order to boost interfacial adhesion and compatibility of the composites, the silane coupling agent KH 580 (3‐mercaptopropyl triethoxysilane) was used to treat CF. The epoxy‐carboxyl and epoxy‐thiol dual reactions during the melt‐blending are utilized to promote the compatibilization of ternary components. The tensile strength of 1 wt% K0‐CF composite is 47.25 MPa, which is 1.22 times greater than that of unmodified CF composite; meanwhile, the notched impact strength of 1 wt% K0‐CF composite is 6.23 ± 0.38 KJ/m 2 , which is 1.2 times higher than that of pure PLA. The addition of K0‐CF enhances the hydrophobicity, interfacial adhesion, melt viscosity and elasticity of the composites. The initial decomposition temperatures and residues of the composites are significantly increased due to excellent thermal stability of CF. Both fibers promote the crystallization of PLA, especially for unmodified CF. Due to excellent mechanical, rheological and thermal properties of PLA/ESO/K0‐CF composites, they show potential applications in packaging fields.Keywords
Funding Information
- Priority Academic Program Development of Jiangsu Higher Education Institutions
This publication has 74 references indexed in Scilit:
- Effect of Curcumin Cross‐Linked Epoxy Soybean Oil on Mechanical Properties and UV Resistance of Polylactic AcidJournal of Applied Polymer Science, 2025
- Melt Compounding of Poly(lactic acid)‐Based Composites: Blending Strategies, Process Conditions, and Mechanical PropertiesMacromolecular Rapid Communications, 2024
- Toughening polylactide by direct blending of cellulose nanocrystals and epoxidized soybean oilJournal of Applied Polymer Science, 2019
- An efficient plasticization method for poly(lactic acid) using combination of liquid‐state and solid‐state plasticizersJournal of Applied Polymer Science, 2018
- Investigation of the microstructures, properties, and toughening mechanism of polypropylene/calcium carbonate toughening masterbatch compositesJournal of Applied Polymer Science, 2017
- Manufacturing of advanced biodegradable polymeric componentsJournal of Applied Polymer Science, 2015
- Dynamic rheological behavior and morphology of polylactide/poly(butylenes adipate‐co‐terephthalate) blends with various composition ratiosAdvances in Polymer Technology, 2011
- Morphology and Properties of Particulate Filled PolymersMacromolecular Symposia, 2004
- Study on morphology of ternary polymer blends. I. Effects of melt viscosity and interfacial interactionJournal of Applied Polymer Science, 2001
- Estimation of the surface free energy of polymersJournal of Applied Polymer Science, 1969