Sensitivity analysis on production tolerances for electric drive systems in automotive application
Authors:
- 27 October 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Abstract
Production tolerances in electric drive systems with interior permanent magnet synchronus machines (IPMSM) lead to unavoidable deviations in torque and power. This paper presents an investigation of the underlying effects utilizing simulations and measurements as well as methods for detection. In particular, deviations of the sensors and of the machine are studied. For the machine, the permanent magnet flux and the air gap thickness are identified as two main influence factors. Finite Element Analysis (FEA) is used to model deviations and to calculate flux tables in the id−iq-plane. Also the influence of current and angle measurement errors are analytically analyzed. The simulated results are confirmed at the test bench, performing measurements with custom-built limit sample machines. Torque deviations of more than 10% are detected. Additionally, a method for detecting the individual deviation of an individual machine is introduced. Measurement of short-circuit current and open-circuit voltage are employed since both quantities are measurable with little effort. The combination of the knowledge about the effects in the machine and the detection methods could be used for compensation.Keywords
This publication has 10 references indexed in Scilit:
- Optimum efficiency control of interior permanent magnet synchronous motors in drive trains of electric and hybrid vehicles2015
- Reduction of cogging torque due to production tolerances of rotor by using partially placed dummy slots in axial direction2014
- Possible manufacturing tolerance faults in design and construction of low speed slotless permanent magnet generator2014
- Parametric sensitivity in the analysis and control of permanent magnet synchronous machines2012
- Design of experiments to address manufacturing tolerances and process variation influencing cogging torque and back EMF in the mass production of the permanent magnet synchronous motors2012
- Manufacturing Tolerances: Estimation and Prediction of Cogging Torque Influenced by Magnetization FaultsIEEE Transactions on Magnetics, 2011
- Superposition techniques for analyzing cogging torque sensitivity to manufacturing errors in fractional pitch PMSM2011
- Design of PM Brushless Motor Taking into Account Tolerances of Mass Production - Six Sigma Design Method2007
- Optimum Control for Interior Permanent Magnet Synchronous Motors (IPMSM) in Constant Torque and Flux Weakening Range2006
- Analysis and compensation of current measurement error in vector-controlled AC motor drivesIEEE Transactions on Industry Applications, 1998