The Impact of DSM Resolutİon and Block Geometry on 3D Rockfall Modeling: The Case of Başköy Heritage Site
- 15 April 2026
- journal article
- Published by Turkish Society for Geomorphology in Jeomorfolojik Araştırmalar Dergisi
- No. 17
Abstract
This study evaluates the impact of using UAV-derived DSM data at different resolutions and with different rock block geometries on 3D rockfall modeling, a widely used approach in rockfall simulations. The study area, the Başköy settlement, is an active, rockfall-prone region and has been officially declared a disaster area due to ongoing rockfall events. The main objective of this study is to understand the effects of UAV-derived DSM data with resolutions of 25 cm, 50 cm, and 1 m, together with the use of rock blocks of different geometries, on 3D rockfall simulations. EOTA, Equant, and Elongated rock blocks were used in the study, and the volumetric and weight characteristics of these rock blocks were numerically similar to each other to some extent. A total of 9 rockfall models were carried out using the RAMMS::Rockfall software. During the modeling process, 50 rock blocks were simulated from each source zone, for a total of 20,000. As outputs of the modeling, kinetic energy (kJ), velocity (m/s), jump height (m), and number of deposited rocks were obtained. Accordingly, the highest velocity and kinetic energy values were obtained using the 25 cm resolution DSM data, whereas the highest jump height value was only observed for the Equant rock block in the 50 cm DSM dataset. The lowest values were obtained from the 1 m DSM dataset because of its smoother, less detailed topographic representation. Using 4,299 fallen rock blocks identified from the orthomosaic data, the relationships among different “number of deposited rocks” datasets, heat maps, and modeled rock blocks were validated using distance-based analysis. Based on these analyses, the 50 cm DSM resolution and the Elongated block type produced the most accurate results.Keywords
This publication has 37 references indexed in Scilit:
- UAV Based Photogrammetry and Rockfall Hazard Assessment at the Vrachon Theatre in GreeceGeotechnical and Geological Engineering, 2026
- Rockfall source identification and trajectory analysis from UAV-based data in volcano-tectonic areas: a case study from Ischia Island, Southern ItalyBulletin of Engineering Geology and the Environment, 2024
- Rockfall forecasting and risk management along a major transportation corridor in the Alps through ground-based radar interferometryLandslides, 2019
- Application of three‐dimensional rockfall modelling to rock face engineeringGeomechanics and Tunnelling, 2017
- Rockfall-Simulation with Irregular Rock Blocks2015
- Key Issues in Rock Fall Modeling, Hazard and Risk Assessment for Rockfall Protection2015
- Size Distribution for Potentially Unstable Rock Masses and In Situ Rock Blocks Using LIDAR-Generated Digital Elevation ModelsRock Mechanics and Rock Engineering, 2014
- The Varnes classification of landslide types, an updateLandslides, 2013
- Recommendations for the quantitative analysis of landslide riskBulletin of Engineering Geology and the Environment, 2013
- Use of LIDAR in landslide investigations: a reviewNatural Hazards, 2010