Thermal Conductivity of Industrial Ladle Slag Linings
Open Access
- 14 March 2025
- journal article
- research article
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 11 (2) , 1431-1441
Abstract
Protective linings are commonly used to prolong the service life of transfer ladles and prevent operational issues. Slag linings are an old and sustainable chromia-free option as slag from the smelter is used to make the lining. In this work, thermal properties and structure of two different ladle slag linings from Boliden Harjavalta were measured using laser-flash analysis and mineralogical techniques. The linings were found to consist mostly of fayalite and magnetite with some entrained copper matte droplets and glass. They included an amorphous layer right against the ladle wall and a textured crystalline layer. The matte transfer ladle slag linings also included a growth layer on top of the coarse-grained crystalline layer. The thermal diffusivity of the linings was measured using LFA. Density was modeled using MTDATA software, and specific heat calculated from thermal diffusivity measurements using a reference sample. These three factors were used to calculate the thermal conductivity. The thermal conductivity of the linings was calculated to be between 1.5 and 2.1 W/(m·K) in a temperature range of 22–800 °C. Graphical AbstractKeywords
Funding Information
- Boliden AB
- Aalto University
This publication has 16 references indexed in Scilit:
- On the Impact of a Change in Slag Batch on the Freeze Lining Structure and StabilityMetallurgical and Materials Transactions B, 2024
- Thermal Conductivity and Thermal Diffusivity of Ferrosilite under High Temperature and High PressureJournal of Earth Science, 2022
- Thermal Conductivity of Solidified Industrial Copper Matte and Fayalite SlagJOM, 2020
- The accuracy of laser flash analysis explored by finite element method and numerical fittingHeat and Mass Transfer, 2019
- MTDATA and the Prediction of Phase Equilibria in Oxide Systems: 30 Years of Industrial CollaborationMetallurgical and Materials Transactions B, 2016
- Freeze‐Lining Formation from Fayalite‐Based Slags2016
- Investigation of Freeze Linings in Copper-Containing Slag Systems: Part II. Mechanism of the Deposit StabilizationMetallurgical and Materials Transactions B, 2013
- Investigation of Freeze-Linings in Copper-Containing Slag Systems: Part I. Preliminary ExperimentsMetallurgical and Materials Transactions B, 2013
- The Importance of Slag Engineering in Freeze-Lining ApplicationsMetallurgical and Materials Transactions B, 2009
- On the Microstructure of a Freeze Lining of an Industrial Nonferrous SlagMetallurgical and Materials Transactions B, 2007