The Potential for Glass Wool Waste as a Filler in UF Adhesive to Promote Particleboard Strength
Authors:
- Michelângelo Vargas FassarellaMFMichelângelo Vargas Fassarella
- Izabella Luzia Silva ChavesICIzabella Luzia Silva Chaves
- Pedro Gutemberg Alcântara SegundinhoPSPedro Gutemberg Alcântara Segundinho
- Juarez Benigno PaesJPJuarez Benigno Paes
- Roberto Carlos Costa LelisRLRoberto Carlos Costa Lelis
- Michel Picanço OliveiraMichel Picanço Oliveira
- Emilly Soares Gomes SilvaESEmilly Soares Gomes Silva
- Fabricio Gomes GonçalvesFabricio Gomes Gonçalves
Open Access
Abstract
Wastes, biomasses, and nanoparticles have motivated reformulations of adhesives in the wood-based-panel industry. This study investigated the incorporation of glass wool (GW) waste as a filler material in urea–formaldehyde (UF) adhesive, evaluating its effects on the adhesive properties as well as on the physical, mechanical, fire-retardant, and acoustic properties of particleboards. Panels with a target density of 700 kg m−3 were produced with different proportions of glass wool in the adhesive (T1: 0%; T2: 3.34%; T3: 4.93%; T4: 6.52%; T5: 9.49%; T6: 12.35%). The adhesive-coated particle mat was pressed in a hydraulic press at 160 °C under a compression force of 72 tons for 10 min. The panels were subjected to analyses of their physical, mechanical, fire-retardant, and acoustic properties, as well as scanning electron microscopy (SEM) analyses. Statistical analysis involved regression, analysis of variance, and a Scott–Knott test (p < 0.05). The results indicated that adding 3.34% GW to the adhesive improved the modulus of rupture, internal bond strength, screw withdrawal resistance, and acoustic efficiency of the panels. A glass wool content of 12.35% enhanced the hardness and the damping factor. These findings highlight the potential of glass wool as a functional filler material in UF adhesive, promoting the development of stronger and more sustainable particleboards.Keywords
Funding Information
- Espírito Santo Research and Innovation Foundation (04/2022, 15/2024, 2022-0BHDH, 179/2022)
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (303565/2021-7)
- Research Support Fund (FAP) of Line IV
This publication has 60 references indexed in Scilit:
- Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel ManufacturingCurrent Forestry Reports, 2024
- Evaluations of the effects of different flame retardants combinations on particleboards produced using urea–formaldehyde resinEuropean Journal of Wood and Wood Products, 2024
- Tannin-based wood panel adhesivesInternational Journal of Adhesion and Adhesives, 2024
- Performance of eucalypt particleboard with the addition of farm wasteHeliyon, 2023
- Low Formaldehyde Binders for Mineral Wool Insulation: A ReviewGlobal Challenges, 2022
- Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard propertiesInternational Journal of Adhesion and Adhesives, 2020
- Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavengerBuilding and Environment, 2018
- Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiberConstruction and Building Materials, 2018
- Correlation between acoustic and physical–mechanical properties of insulating composite boards made from sunflower stalk and wood chipsEuropean Journal of Wood and Wood Products, 2016
- Reducing resin content and board density without adversely affecting the mechanical properties of particleboard through controlling particle sizeJournal of Forestry Research, 2011