Impact of Multidimensional Process Vectors in Enhancing Electrical Performance and Reliability of SnO TFT
- 10 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (4) , 1968-1974
Abstract
As an emerging p-type semiconductor, the precise control of process parameters in tin monoxide (SnO) thin-film transistor (TFT) is crucial for their integration into complementary circuits. However, the metastability of Sn ${}^{{2}+}$ ions promotes excessive oxidation to Sn ${}^{{4}+}$ and degrades film morphology, impairing electrical characteristics. This study systematically explores the impact of multidimensional process vectors in enhancing the performance and stability of SnO TFT. By integrating a high- $k$ HfO2 gate dielectric, the gate capacitance per unit area was increased, effectively reducing the threshold voltage. Optimal device performance was achieved at a sputtering power of 50 W and a substrate temperature of $200~^{\circ } $ C, exhibiting a field-effect mobility of 2.10 cm2/V $\cdot $ s, an ${}_{\mathrm {ON- {OFF}}}$ current ratio of $1.13\times 10^{{4}}$ , a threshold voltage of −0.39 V, and a subthreshold swing (SS) of 0.97 V/dec. Material characterization confirmed a dominant Sn ${}^{{2}+}$ phase with minor Sn0 content, alongside a continuous, filmed morphology with low surface roughness, collectively contributing to enhanced carrier transport. Moreover, the device demonstrated excellent reliability under negative bias stress (NBS), with a threshold voltage shift of only −0.48 V, attributed to low bulk and interface trap state densities.Keywords
Funding Information
- National Natural Science Foundation of China (52305608)
- National Natural Science Foundation of China (62104138)
This publication has 31 references indexed in Scilit:
- P-type ZnO:N thin films deposited at room temperature on different substrates for p-channel thin film transistor fabricationVacuum, 2024
- Radiation Stability of the p-Type SnOx TFT with Al2O3 and HfO2 Passivation LayersACS Applied Electronic Materials, 2024
- High Field-Effect Mobility and On/Off Current Ratio of p-Type ALD SnO Thin-Film TransistorACS Applied Electronic Materials, 2023
- Multimodal Encapsulation to Selectively Permeate Hydrogen and Engineer Channel Conduction for p-Type SnOx Thin-Film Transistor ApplicationsACS Applied Materials & Interfaces, 2022
- Recent Progress and Perspectives of Field‐Effect Transistors Based on p‐Type Oxide SemiconductorsPhysica Status Solidi (RRL) – Rapid Research Letters, 2021
- Switching Enhancement via a Back-Channel Phase-Controlling Layer for p-Type Copper Oxide Thin-Film TransistorsACS Applied Materials & Interfaces, 2020
- Lanthanum Doping Enabling High Drain Current Modulation in a p-Type Tin Monoxide Thin-Film TransistorACS Applied Materials & Interfaces, 2019
- Fabrication of high-performance p-type thin film transistors using atomic-layer-deposited SnO filmsJournal of Materials Chemistry C, 2017
- Record Mobility in Transparent p-Type Tin Monoxide Films and Devices by Phase EngineeringACS Nano, 2013
- Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductorsNature, 2004