High Shear Dispersion Techniques for Up‐Scaling and Controllable Cathode Morphology in High Performance Li−S Pouch Cells
Open Access
- 6 March 2025
- journal article
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (8)
Abstract
The lithium sulfur (Li−S) cell chemistry is promising due to the high specific capacity of its active materials resulting in high specific energy cells. In the past years, the number of publications on practical prototype cells have increased, already reporting high specific energies over 400 Wh kg−1 with low electrolyte‐to‐sulfur (E : S) ratios. To enable the complex conversion chemistry at low E : S ratios, the cathode porosity adaption is crucial and depends for example on the suspension blending procedure. There are several methods and devices to prepare suspensions for battery electrodes, e. g. dissolver and planetary mixers. In this study, a standard laboratory blender with low shear forces (EL1) is compared with a high shear mixer (HSM) for preparing porous carbon‐sulfur suspensions in a relevant scale. In this study, the influence of the slurry preparation on the final performance is investigated by coating via slot die on a roll‐to‐roll device to produce carbon‐sulfur‐cathodes. The electrodes are characterized via optical and mechanical measurements. Electrochemical analysis is conducted using coin cells for pre‐evaluation as well as multi‐layered pouch cells with reduced electrolyte volume (3.0 μl mg(S)−1). It could be shown that the HSM enables increased binder dispersion and enhanced density leading to improved cycle life.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03XP0398)
This publication has 39 references indexed in Scilit:
- Ultralong Cycling and Safe Lithium–Sulfur Pouch Cells for Sustainable Energy StorageAdvanced Materials, 2024
- Improving Rate Performance of Encapsulating Lithium‐Polysulfide Electrolytes for Practical Lithium−Sulfur BatteriesAngewandte Chemie International Edition, 2024
- Unlocking Failure Mechanisms and Improvement of Practical Li–S Pouch Cells through In Operando Pressure StudyAdvanced Energy Materials, 2021
- Ultralight Electrolyte for High‐Energy Lithium–Sulfur Pouch CellsAngewandte Chemie International Edition, 2021
- The Role of Carbon Electrodes Pore Size Distribution on the Formation of the Cathode–Electrolyte Interphase in Lithium–Sulfur BatteriesBatteries & Supercaps, 2020
- Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and OpportunitiesAngewandte Chemie International Edition, 2019
- Toward Practical High‐Energy Batteries: A Modular‐Assembled Oval‐Like Carbon Microstructure for Thick Sulfur ElectrodesAdvanced Materials, 2017
- Carbon Materials for Lithium Sulfur Batteries—Ten Critical QuestionsChemistry – A European Journal, 2016
- Lithium–Sulfur Cells: The Gap between the State‐of‐the‐Art and the Requirements for High Energy Battery CellsAdvanced Energy Materials, 2015
- A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium BatteriesAdvanced Materials, 2002