Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Holger Althues has a total of 124 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantitative Nanoscale Material Mapping Based on Extreme Ultraviolet Ptychography

    by Leona Licht, Wilhelm Eschen, Chang Liu, Johannes Reents, Themistoklis Sidiropoulos, Daniel Santiago Penagos Molina, Jörg Kaspa, Holger Althues, Jonathan Apell, Dongmei Liu, et al.

    Quantitative, nondestructive characterization of materials at the nanoscale is crucial for the development of advanced energy, electronic, and nanostructured systems. In this context, microscopy based on extreme ultraviolet (EUV) radiation has recently attracted considerable interest, as it combines high spatial resolution, strong elemental contrast, and micrometer-scale penetration depth in compact, table-top setups. Here, we employ EUV ptychography to quantitatively resolve the spatial distribution of silicon, oxygen, and aluminum with sub-50 nm half-pitch resolution. Compared to the established energy-dispersive X-ray spectroscopy (EDX) technique, our approach delivers enhanced image quality and spatial resolution, while conventional methods reach their limits. This is enabled by retrieving element-specific atomic areal densities from quantitative amplitude and phase reconstructions provided by EUV ptychography. With a single-wavelength illumination, we determine the oxygen and silicon content within a 1.4 μm thick lamella of an all-solid-state battery anode. We additionally characterize the composition of a more complex aluminum–silicon alloy, enabled through differential contrast dual-wavelength EUV ptychography. Overall, these results establish EUV ptychography as a powerful technique for quantitative nanoscale material analysis. It is suitable for radiation-sensitive specimens or elements, which are difficult to distinguish in electron microscopy. Its capability to accurately map light elements, often challenging for conventional methods, makes it a promising tool for applications spanning materials science, energy technologies, and microbiology.

  • Open Access

    Impact of Particle Morphology on Processing and Performance of Sodium Ion Anodes

    by Johannes Kühn, Tom Boenke, Florian S. Hoffmann, Thomas Abendroth, Holger Althues, Stefan Kaskel

    Despite pronounced research on hard carbon (HC) anode materials for sodium‐ion batteries (SIB), particularly the impact of particle morphology on electrode microstructure poses open questions regarding ionic as well as electrical transport or sodium metal plating. This study systematically compares two hard carbons, one representing a nonspherical particle morphology (HC‐Ref) and the other representing a spherical particle morphology (HC‐Sph‐10:90). Industrially relevant loadings were investigated across powder, electrode, half‐cell, and full‐cell configurations. The analysis of powder and electrode microstructure revealed that spherical particles exhibited superior packing efficiency, leading to higher electrode densities, whereas nonspherical particles retained electrode porosity upon calendaring, thereby enhancing ionic transport. The formation of multipoint contacts was identified to enhance conductive pathways. The electrochemical characterization revealed a clear trade‐off between the dense packing and transport capability of the anode. This trade‐off translated into three‐electrode full cells, where morphology‐related polarization affected the potential‐defined onset of sodium metal plating. Sodium metal plating is therefore governed by operating conditions like current density and voltage window, while the electrode structure determines the underlying transport limitations and thus the plating susceptibility. Consequently, electrode microstructure is presented as a critical design parameter, together with design guidelines for the optimization of hard carbon anodes for high‐energy and plating‐resistant SIBs.

  • Open Access

    Tribochemical Interface Engineering of TiS 4 –Argyrodite Composites for Metal Sulfide‐Based Solid‐State Batteries

    by Pascal Seete, Felix Hippauf, Susanne Dörfler, Holger Althues, Niklas M. Abke, Simon Wiemers‐Meyer, Kentaro Kuratani, Tomonari Takeuchi, Hikari Sakaebe, Martin Winter, et al.

    Amorphous titanium tetrasulfide (TiS 4 ) is investigated as a high‐capacity cathode material for sulfide‐based solid‐state batteries using Li 6 PS 5 Cl argyrodite as solid electrolyte. A systematic comparison between low‐energy ball milling (LBM) and high‐energy ball milling (HBM) reveals that tribochemical processing intensity determines composite microstructure and electrochemical performance. HBM‐processed composites exhibit superior homogenization confirmed by quantitative FIB‐SEM analysis, achieving discharge capacities of 1110 mAh g S −1 at 0.05 C and 669 mAh g S −1 at 0.5 C. Despite lower bulk electronic conductivity, HBM composites demonstrate enhanced performance consistent with shortened solid‐state diffusion lengths and increased triple‐phase boundary density. SOC‐dependent electrochemical impedance spectroscopy reveals that HBM composites accumulate only 19% impedance growth at 100% SOC over 34 cycles compared to 41% for LBM counterparts, indicating superior interfacial stability. Time‐of‐flight secondary ion mass spectrometry provides spatial evidence for heterogeneous lithiation, with codetected TiS + and Li 3 S + species consistent with gradual structural reorganization along the conversion trajectory. Scalability is demonstrated through dry‐film electrode fabrication, and HBM‐processed cathodes achieve initial capacities of 1240 mAh g S −1 and retain 950 mAh g S −1 after 80 cycles. Absolute capacity values reflect the combined electrochemistry of TiS 4 and partially decomposed Li 6 PS 5 Cl. This work establishes tribochemical processing as a viable strategy for optimizing conversion‐type cathodes in solid‐state batteries.

  • Open Access

    Mechanistic and Electrochemical Analysis of Silicon–Carbon Composites as High‐Capacity Anode Material for Lithium‐Ion Solid‐State Batteries

    by Stephanie Mörseburg, Svea Lilly Margarete Schlag, Jonas Kunigkeit, Felix Hippauf, Sahin Cangaz, Susanne Dörfler, Thomas Abendroth, Holger Althues, Eike Brunner, Stefan Kaskel

    The combination of both high mechanical stability due to internal volume compensation and high capacities by incorporated silicon renders silicon–carbon (Si–C) void structures attractive anode materials for lithium‐ion solid‐state batteries (LISSBs). Evaluating the lithiation mechanism of Si–C composite (30 wt% Si, 1473 mAh g Si–C −1 ) electrodes in half‐cells versus lithium using Li 6 PS 5 Cl as a solid electrolyte also reveals participation of the carbon matrix. Consequently, the storage of additional capacity in the carbon shell of the Si–C particles [= carbon (over)lithiation] is investigated in full cells versus nickel‐rich NCM (n/p < 1) and compared with non‐overlithiated Si–C|SE|NMC cells (n/p > 1). The absence of metallic lithium deposition is evidenced by 7 Li Nuclear Magnetic Resonance spectroscopy, indicating solely (over)lithiation of the carbon matrix without lithium plating. Finally, the investigation of application‐relevant pouch cells (n/p > 1) demonstrates minimal breathing behavior together with high reversibility even at stack pressures as low as 5 MPa.

  • Open Access

    Operando Scanning SAXS/WAXS Cell Design for Multiscale Analysis of All‐Solid‐State Battery Systems

    by Jean‐Marc von Mentlen, Magdalena Fiedler, Klara Neumayr, Pronoy Dutta, Ayça Senol Gungor, Susanne Dörfler, Heinz Amenitsch, Christian Zaubitzer, Holger Althues, Vanessa Wood, et al.

    Operando X‐ray scattering techniques, particularly small‐ and wide‐angle X‐ray scattering (SAXS/WAXS), have been key for elucidating the physicochemical processes governing liquid‐electrolyte batteries by providing real‐time insights into phase transformations and nanoscale structural evolution. However, extending these methods to all‐solid‐state batteries has been experimentally challenging due to high X‐ray absorption and nonideal operating pressures in transmission mode. Here a novel operando electrochemical cell design is presented that enables cross‐sectional scanning SAXS/WAXS measurements, while maintaining the pressure necessary for solid‐state operation. Applying this scanning SAXS/WAXS technique to all‐solid‐state lithium‐sulfur batteries, it enables simultaneous mapping of the crystalline phase evolution and the nanoscale structural changes across distinct cell components during cycling. Spatially resolved WAXS revealed significant heterogeneity in the formation and distribution of Li 2 S within the composite cathode. Simultaneously, WAXS captured an anisotropic lithiation mechanism in the Li–In anode, evidenced by the preferential disruption of In(110) planes and suggesting amorphous LiIn formation. Combined analysis of stable SAXS profiles and WAXS‐derived Li 2 S nanocrystallite sizes suggest that the sulfur conversion occurs within the nanopores of the templated carbon host. Control experiments using a liquid‐electrolyte Li–S system validated the technique's sensitivity to detect expected nanoscale changes, confirming the genuineness of the solid‐state observations.


  • (Invited) Scalable Sulfurized Polyacrylonitrile Cathodes with Enhanced Rate Performance for Li-S Batteries

    by Ralf Schmidt, Tom Boenke, Paul Härtel, Susanne Dörfler, Thomas Abendroth, Holger Althues, Stefan Kaskel

    The lithium sulfur (Li-S) cell chemistry is promising due to the high specific capacity of its active materials resulting in high specific energy cells[1,2]. Consequently, this battery type is notably suitable for lightweight applications such as aviation[3]. Sulfurized polyacrylonitrile (SPAN) is one of the currently highly prominent materials offering the advantages of the active material sulfur with the absence of dissolved polysulfides. Polysulfides are known to cause the so-called shuttle effect usually resulting in a rapid capacity decrease due to electrolyte depletion and corrosion reactions at the Li anode surface. Owing to the comparably low active material content (around 40 %) in SPAN, optimization (e.g. densification) on electrode level is a crucial aspect for maximizing energy density on cell level[4]. In the project SulForFlight, industrially produced SPAN material is used as active material for manufacturing Li-S batteries. Herby, the scalable production of electrodes as well as their mechanical properties were investigated[5]. Densification of the electrodes and the effects of this process were tested showing improvement potential. In this work, the optimization of the electrode behavior after compacting was investigated by varying the binder- and conductive additive systems. Additionally, the influence of primered carbon collector foil was analyzed. For characterization, optical and mechanical measurements were done as well as electrochemical tests using coin cells and multi-layered pouch cells. Recent electrodes achieved discharge capacities up to 1400 mAh g(S)-1 and high rate capabilities up to 3C even after a densification of 50 % demonstrating the potential for usage in aviation applications. Acknowledgement: This work is funded by the BMBF SulForFlight (03XP0491C). [1] H. D. Yoo, E. Markevich, G. Salitra, D. Sharon, D. Aurbach, MaterialsToday 2014, 110–121. [2] S. Dörfler, H. Althues, P. Härtel, T. Abendroth, B. Schumm, S. Kaskel, Joule 2020, 4, 539–554. [3] S. Dörfler, S. Walus, J. Locke, A. Fotouhi, D. J. Auger, N. Shateri, T. Abendroth, P. Härtel, H. Althues, S. Kaskel, Energy Tech 2021, 9, 2000694. [4] X. Zhao, C. Wang, Z. Li, X. Hu, A. Abdul Razzaq, Z. Deng, J. Mater. Chem. A 2021, 9, 19282–19297. [5] R. Moschner, H. Cavers, P. Michalowski, A. Kwade, Batteries & Supercaps 2024. Figure 1

  • Open Access

    High Shear Dispersion Techniques for Up‐Scaling and Controllable Cathode Morphology in High Performance Li−S Pouch Cells

    by Ralf Schmidt, Tom Boenke, Paul Härtel, Susanne Dörfler, Thomas Abendroth, Holger Althues, Stefan Kaskel

    The lithium sulfur (Li−S) cell chemistry is promising due to the high specific capacity of its active materials resulting in high specific energy cells. In the past years, the number of publications on practical prototype cells have increased, already reporting high specific energies over 400 Wh kg−1 with low electrolyte‐to‐sulfur (E : S) ratios. To enable the complex conversion chemistry at low E : S ratios, the cathode porosity adaption is crucial and depends for example on the suspension blending procedure. There are several methods and devices to prepare suspensions for battery electrodes, e. g. dissolver and planetary mixers. In this study, a standard laboratory blender with low shear forces (EL1) is compared with a high shear mixer (HSM) for preparing porous carbon‐sulfur suspensions in a relevant scale. In this study, the influence of the slurry preparation on the final performance is investigated by coating via slot die on a roll‐to‐roll device to produce carbon‐sulfur‐cathodes. The electrodes are characterized via optical and mechanical measurements. Electrochemical analysis is conducted using coin cells for pre‐evaluation as well as multi‐layered pouch cells with reduced electrolyte volume (3.0 μl mg(S)−1). It could be shown that the HSM enables increased binder dispersion and enhanced density leading to improved cycle life.


  • Open Access

    Towards Scalable Production of Sodium‐Ion Batteries: Solvent‐Free Layered‐Oxide Cathodes and Aqueous‐Processed Hard Carbon Anodes for Cost‐Effective Full‐Cell Manufacturing

    by Johannes Kühn, Florian Schmidt, Pascal Seete, Tom Boenke, Florian S. Hoffmann, Arthur Dupuy, Benjamin Schumm, Thomas Abendroth, Holger Althues, Stefan Kaskel

    Achieving commercial viability for more sustainable sodium‐ion batteries (SIB) necessitates reducing the environmental impact of production, particularly originating from electrode drying and the use of toxic solvents like N‐methyl‐2‐pyrrolidone (NMP). This study presents the dry‐processing of commercial P2‐type Na0.75Ni0.25Fe0.25Mn0.50O2 (NFM) via the DRYtraec® process, aiming to lower the binder content of 1 wt.% polytetrafluoroethylene (PTFE) and eliminating the need for electrode drying and NMP recovery. Assessments of electrode morphology and active material crystallinity were conducted to gauge the effects of mechanical stress during processing. The resulting cathodes, loaded at a commercially relevant 2.3–2.7 mAh cm−2 loading, were successfully paired with aqueous‐processed hard carbon (HC) anodes, demonstrating stable performance in full‐cells. Comparative analysis with entirely wet‐processed electrodes revealed comparable capacity accessibility and comparable long‐term stability. This showed the competitiveness of dry‐processed cathodes. Finally, the integration of NMP‐free, dry‐processed cathodes and aqueous‐processed anodes was scaled to the commercially relevant prototype pouch‐cell. The cell demonstrates stable cycling for 400 cycles with an energy density of 102 Wh kg−1 as well as reduced processing costs and environmental footprint.


  • Open Access

    Toward Higher Energy Density All‐Solid‐State Batteries by Production of Freestanding Thin Solid Sulfidic Electrolyte Membranes in a Roll‐to‐Roll Process

    by Maria Rosner, Sahin Cangaz, Arthur Dupuy, Felix Hippauf, Susanne Dörfler, Thomas Abendroth, Benjamin Schumm, Holger Althues, Stefan Kaskel

    All‐solid‐state batteries (SSB) show great promise for the advancement of high‐energy batteries. To maximize the energy density, a key research interest lies in the development of ultrathin and highly conductive solid electrolyte (SE) layers. In this work, thin and flexible sulfide solid electrolyte membranes are fabricated and laminated onto a non‐woven fabric using a scalable and solvent‐free, continuous roll‐to‐roll process (DRYtraec). These membranes show significantly improved tensile strength compared to unsupported sheets, which facilitates cell assembly and allows a continuous component production using a single‐step calendering process. By tuning the thickness, densified membranes with thicknesses ranging from 40 to 160 µm are obtained after a compression step. The resulting SE membranes retain a high ionic conductivity (1.6 mS cm−1) at room temperature. An excellent rate capability is demonstrated in a SSB pouch cell with a Li2O–ZrO2‐coated LiNi0.9C0.05Mn0.05O2 cathode, a 55 µm thin SE membrane, and a columnar silicon anode fabricated by a scalable physical vapor deposition process. At stack level, a promising energy density of 673 Wh L−1 (and specific energy of 247 Wh kg−1) is achieved, showcasing the potential for high energy densities by reducing the SE membrane thickness while retaining good mechanical properties.


  • Open Access

    A metallic lithium anode for solid-state batteries with low volume change by utilizing a modified porous carbon host

    by Stephanie Mörseburg, Tom Boenke, Kelly Henze, Konstantin Schutjajew, Jonas Kunigkeit, Sebastian Leonard Benz, Sahin Cangaz, Joachim Sann, Felix Hippauf, Susanne Dörfler, et al.